Wondering how to program a DIRECTV remote to a Samsung TV in just a couple of minutes? Search no further, because you’ve just come along to the best post containing the answer!
We will provide you with a top-rated guideline that will explain everything in detail.
To program your DIRECTV remote to a Samsung TV, first make sure that your remote is active and aim it towards the TV. On your current remote, press the Menu, go to Parental Favourites & Setup > System Setup and access the remote options. Choose “remote” and enter the code “54000”.
Once the code has been inserted, your DIRECTV remote should begin the programming process.
If that wasn’t quite clear for you, make sure to stick around by the end of the post to learn the whole programming process in a step-by-step tutorial.
How To Program A DIRECTV Remote To A Samsung TV? – Steps
Before programming a DIRECTV remote to your Samsung TV, a couple of things must be taken care of.
You must be certain that both of your devices are compatible and are in a working and eligible state to be programmed.
Begin with the steps down below to learn how to prepare your devices and complete the programming with the DIRECTV remote afterward.
The first and most obvious step is to prepare your devices for being programmed.
We assume that you already have your default Samsung remote paired to your TV because you will most likely need it for the process as well.
The DIRECTV receiver MUST be connected to your Samsung TV via HDMI in order for the process to be completed.
Otherwise, your DIRECTV won’t work and you will be unable to pair the remote with your TV in the first place.
To prepare your devices, make sure your DIRECTV and Samsung remote have active batteries which are not worn out.
Once everything is ready turn ON your Samsung TV as well as the DIRECTV receiver and proceed with the next step.
Now when you’re ready with the preparation it’s time to learn how to program DIRECTV remote to Samsung TV:
- Get your DIRECTV remote and double-check if everything is working correctly.
- On your DIRECTV remote, press the MENU button.
- Go to Settings and press Remote Control > Program Remote.
Once in the program remote menu, proceed with the next step.
Once in the programming menu, you will want to leave your DIRECTV menu idle for a second and perform a special programming process for your TV to recognize the remote.
Follow the steps below to pair your DIRECTV remote to Samsung TV:
- Grab your DIRECTV remote and point it towards your Samsung TV.
- On your DIRECTV remote press and hold the Select and Mute button.
- Hold the buttons down until the LED on top of your remote flickers twice.
- Release the button and input the Samsung TV code, which should be “54000”
Keep in mind that there are new generation codes – 54000 and old generation codes – 0101 for Samsung TVs.
We suggest trying both since we don’t know the exact release date of your Samsung TV model!
Once in the Program Remote tab, follow the steps below to establish the connection with your Samsung TV:
- In the Program Remote tab, click on Pair/Program Remote.
- Click on “Change TV”.
- Wait for your Samsung TV to redirect you to the next tab.
- In the search field, use the arrow keys of your remote, to write down the brand of your TV (Samsung TV).
- Hit the OK button once.
If you’ve executed step #3 correctly, even if you’re unable to select “Samsung TV” in the drop-down menu, you’ll be just fine with “I don’t know my TV’s brand”.
After choosing Samsung TV in the drop-down menu or “I don’t know my TV’s brand”, to finalize the programming you must press the power button.
If the power button shuts down your Samsung TV and not only the receiver, then the programming is successful.
Even if the power button does nothing, it could be a temporary glitch so there is another way to tell whether the programming was successful or not.
Simply press the volume buttons and check if the volume levels will change accordingly.
If however, your input does not reflect on the Samsung TV, something definitely went wrong, and next, we’ll review some way to solve the problem.
Now that you know more about how to program a DIRECTV remote to Samsung TV, but something didn’t work out for you, there are a couple of things you can try.
It could either be an issue with your receiver, TV, or remote itself.
If your remote couldn’t connect with your Samsung TV, then perhaps a good hard reset (power cycle) should be able to resolve the issue.
Here is how to do it:
- Unplug your receiver’s power adapter and wait for 5 minutes.
- Unplug the TV’s power adapter as well and plug the receiver.
- After another 5 minutes, plug in the TV and start your configuration.
Once both of your devices have booted, go back to step #3 and do programming all over again.
It is possible that the DIRECTV remote itself is not in proper condition. Here are some suggestions to troubleshoot your DIRECTV remote with.
By power cycling your remote, you will discharge the device effectively which is most turns out to be helpful.
Here is how to power cycle your DIRECTV remote:
- Eject the remote’s batteries.
- Press each button and hold it down for 5 seconds.
- Put the compartment back together.
If a power cycle didn’t help, we recommend replacing your DIRECTV remote’s batteries.
Here is how to do it replace the DIRECTV batteries:
- Unscrew the battery compartment on the bottom of the TV.
- Eject the old batteries.
- Grab a fresh set of batteries and insert them in your remote.
Once you’re done with these steps, try interacting with your TV once again and if it does not work, try the programming process from the beginning.
Read Next: How Long Do Samsung TVs Last?
To program the DIRECTV remote with Samsung TV, first, start the programming and hold the mute/select button on your DIRECTV. Once the LED blinks twice, release the button and enter the old or the new codes “54000/0101” before pressing the power button once.
Now that you know how to program a DIRECTV remote to a Samsung TV, you should be able to easily complete the process with our easy steps.
If you’re still unable to program the remote at the end, you might be looking forward to an issue with your setup.
- Wyze Camera Making Noise? – (7 Proven Solutions!) - December 10, 2023
- Philips Roku TV Won’t Turn On No Red Light? (6 Quick Fix!) - December 10, 2023
- Shark Robot Vacuum Obstruction Error? (7 Proven Solutions) - December 7, 2023