samsung tv won't turn on after power outage

Your Samsung TV won’t turn on after power outage and you’re looking for an easy solution? Don’t worry, because we’ve got you covered!

By the end of this guide, you will know exactly what is going on with your Samsung TV and how to fix the issue in a matter of minutes!

If your TV won’t turn on after a power outage, perform a power drain on the device and make sure the power adapter is still intact. Next, reset the circuit breaker and plug your TV into a different power source.

Before we move on with the troubleshooting process, let’s take a look at what might be causing the issue and preventing you from turning on the TV.

Why Samsung TV Won’t Turn On After Power Outage?

First of all, it is good to consider whether the power has come back.

Sometimes whenever there is a power outage, technicians would turn on the power to test for a few seconds and then turn it off again instantly.

Make sure that the power has been on for at least 10 minutes, before moving on with the troubleshooting. It is possible that technicians are still testing and diagnosing the issue.

Excluding this, here is what could be preventing you from turning on the Samsung TV:

1. Power Adapter Problem

If something went wrong with your Samsung TV’s power adapter, it might be due for a replacement.

2. Glitched Circuit Breaker

Sometimes the whole room’s power might have been stuck and you would have to reset the circuit breaker to fix the issue.

3. Power Outlet Problem

A problem with the power outlet your TV is plugged in might be responsible for the issue.

4. Port Issue

A power outage might have burned out your Samsung TV’s power adapter port, which will prevent the delivery of any electricity to your TV.

5. Hardware Malfunction

Lastly, a hardware problem as a result of the power outage might be the origin of the problem.

Now that we have mentioned all possibilities let’s move on to the actual solutions you can apply at home.

What To Do When Your Samsung TV Won’t Turn On After A Power Outage?

fix samsung tv won't turn on after power outage

Before we proceed, double-check if the power has come on.

Also make sure that the power is strong, because often after a power outage, there is a time interval in which the power itself is weaker than normal.

If everything is okay, but your TV does not want to turn on, proceed with the solutions:

Solution #1 Power Drain Samsung TV

The first and most easy solution in your way of resolving the issue is power draining your Samsung TV.

This will actively discharge the device, granting it with a cold boot during the next startup.

Here is how to power drain your Samsung TV:

  1. Unplug your TV’s power adapter from the source.
  2. Wait for ~5 minutes for the TV to appropriately discharge.
  3. Plug the power adapter back into the source and try turning it on.

In addition, make sure your remote is eligible as well.

If the batteries have run out at an inappropriate time, it is possible that this is the reason you’re unable to turn the TV on.

Solution #2 Try Using The Power Button

If all attempts you’ve made to turn on your TV so far were via the hardware remote, there is another way to test out your TV.

As you probably know, all Samsung TVs have a power button located somewhere on their panel.

For TVs released before 2017, the power button would usually be in the center of the back panel.

For TVs released after 2017, you will be looking for the button on the side panel or beneath the screen.

To turn on your Samsung TV using the power button, hold it down for 15 seconds and check if the LEDs will come on.

Solution #3 Use Different Power Source

As you probably know, power outages can do nasty things to power sources in your household, let alone with strips or dividers.

For this solution, you’re going to test out different sources on your Samsung TV to determine if the power outage has burned some of your power sources.

Try plugging the Samsung TV into a proven source that had another device plugged in it.

If the device you’ve just unplugged has been working correctly, you will know that the power source is proven and it is working.

Note: Avoid using power strips or dividers for the rest of the guide since you cannot trust these devices during and after power outages.

Solution #4 Change The Power Adapter

samsung tv won't turn on power outage

If your Samsung TV won’t turn on after a power outage something might have gone wrong with the power cable itself.

Samsung TVs would usually have two-sided power adapters, which you have to plug both into your TV and the power source.

This is exactly what could cause the power adapter to go faulty since it isn’t built-in to the TV.

For this solution, unplug the power adapter from both ends and check it out for visual hardware damage as a result of the power outage.

Change the power adapter with another one and since they are universal, you shouldn’t struggle at finding a replacement.

Connect both sides of the new power adapter and if the TV still does not want to turn on, then you might be dealing with a more complex issue than we thought.

Solution #5 Inspect Power Input Slot

Another cause for you to be unable to turn on your Samsung TV is the fault with the power input slot as a consequence of the power outage.

This can often occur whenever the power comes back up since your TV is surging power from the source at this moment.

To fix the power input slot, first of all, unplug the power adapter and take a good look at burned areas.

If there aren’t any burned areas, then this is good. Make sure the cable goes in properly on the back of your Samsung TV and there is no dust on the ports.

Solution #6 Reset The Circuit Breaker

Lastly, if no committed solution managed to help your Samsung TV, perhaps resetting the whole room’s power might help.

After a power outage, the power may glitch and by resetting the circuit breaker, you should be able to fix it.

Here is how to reset your circuit breaker:

  1. Open the circuit breaker box and locate the room switch where your Samsung TV is plugged in.
  2. Slowly turn down the voltage in a 5 seconds interval.
  3. Wait for a minute or two and plug the switch all the way back at a slow pace again.

Your whole room’s power will now reset and afterward, you can test your Samsung TV again.

Read Next: How Long Do Samsung TVs Last?

Bottom Line:

To fix Samsung TV after an outage, first, drain the TV’s electricity and inspect the power adapter and the power adapter slot. Next, reset the circuit breaker, change the power adapter, inspect the remote and try turning on your TV with the power button.

Now that you know why Samsung TV won’t turn on after power outage, you should be able to fix the issue with our easy-to-apply solution.

If the issue is still not fixed by the time, you’re reading this, then perhaps the right outcome is to get in touch with a technician to inspect your Samsung TV.

Nicole B