Is your Samsung fridge blinking temperature, and you cannot understand why it is doing so?
Of course, there will be a need to worry if it is your first time seeing this behavior on your appliance.
Below we have provided you with reasons for this issue and how you can fix it on your own without needing an expert. Kindly read on.
If your Samsung fridge temperature blinks, it could be because it has sensed that the temperature inside is high above 590 F. Possibly you left its door open for too long, you stored hot food inside, or your fridge is new and is just adjusting.
Avoid allowing hot or warm air in the fridge to solve the issue.
Why is My Samsung Fridge Temperature Flashing?
Are you seeing a red light on your Samsung fridge temperature, and you wonder what causes it?
See below the common reasons for this occurrence.
- Your refrigerator is new and trying to adjust
- You stored hot food in the fridge
- You left the door open for too long
- Your fridge door has air holes
- The freezer has frost build-up
- It is reacting to a power outage
Note: You can avoid issues in your Samsung fridge if you give it regular maintenance.
Skipping the maintenance schedule may lead to problems that may cause it to malfunction completely.
How to Fix Samsung Fridge Blinking Temperature Issue
The most common cause for your Samsung fridge temperature blinking is the high temperature inside the fridge or freezer.
Below we shall see how you can reduce the temperature by applying several techniques related to the issue.
Solution #1: Give the Fridge Time
Have you just bought a new Samsung fridge, and you see the temperature blinking after installing it?
That should not worry you. The temperature tends to blink when you connect your appliance to the mains for the first time.
The blink basically means that the temperature in the freezer or fridge is still too warm.
Do not open the door when you see the blink. Just give your Samsung fridge time, and it will adjust. The red light will go off on its own.
Solution #2: Fix the Temperature
Your refrigerator’s inside temperature should not go past 59 degrees Fahrenheit.
The average temperature should be 4 degrees Fahrenheit or 38 degrees Celsius. A freezer temperature should be 0 degrees Fahrenheit or 120 C.
If the temperatures are above the average temperature, the light will blink to tell you that there is a problem. You will also hear a bell sound.
The solution is to change the temperature to a lower setting. Allow the fridge about four hours to adjust. Hence, you will not see blinking light nor hear the bell sound.
Solution #3: Check the Door
If you leave your refrigerator door open or do not close it correctly, the temperature light will blink.
Hot air enters inside, causing the temperature to rise, reducing the cold air inside the freezer.
So, the fridge will start blinking to notify you that the temperature inside is abnormal or too high.
Kindly check if the fridge door is correctly closed. If not, close it tightly.
Also, check if your fridge door has cracks, holes, or gaps. These spaces will let in warm air into the fridge. Hence, it will interfere with the inside temperature causing the refrigerator to blink.
The gaps may be present between the cabinet and the door seal.
You can adjust the door seal by pushing it away from your door gently using your finger. If you have other openings that persist, kindly replace the seal.
Solution #4: Avoid Putting Hot Foods in the Fridge
When you put hot food into your appliance, it will increase the temperature in the refrigerator. Hence, the temperature light will blink to notify you of a problem.
If so, remove the food, let it cool down, and then store it later into the fridge.
Solution #5: Power Outage
When there is a power outage, your fridge will have this issue. Electricity is the primary source of the cold air in the refrigerator.
If the power goes out, the temperature will rise; hence, you will see it blinking to show something amiss.
Kindly check if the problem resolves when the electricity comes back.
Solution #6: Check if the Freezer has Frost Build-Up
When your freezer has frost build-up, it will not function properly. Too much frost will interfere with the temperature requirement in the appliance.
Kindly check if that is the case in your freezer, then defrost it manually. See if the blinking stops.
If you’re not sure about how to remove frost from your freezer, kindly check your user’s manual for more information.
Solution #7: Restart the Fridge
If you have tried all the above solutions but the fridge temperature still blinks, it might mean that some settings are incorrect.
Restarting may fix the problem or any incorrect settings.
Here is how you can restart it: Turn off the circuit breaker that powers your fridge. You can as well unplug the refrigerator.
Give the fridge some time, then power it back on.
Solution #8: Reset the Freezer
Resetting your freezer will fix some problems, such as the temperature light blinking.
To reset, you will need to hold both the power freezer and the power cool button, then press them simultaneously.
Release the buttons after a few seconds. After this action, your system will be reset; hence it should resume working normally.
Solution #9: Reset the Temperature
Some digital fridges display the temperature they are operating on, on their display. Hence, it is very easy to select or choose the temperature you wish.
If your screen shows you the correct temperature, but the fridge is still blinking, you can reset the temperature using the following steps.
- Locate the Control Panel. You will find the control panel on your fridge’s ice dispenser.
- Set the Temperature. Press and hold the button on your fridge until it reaches the temperature you want it to be.
You will see a new temperature setting on your fridge; hence, you will know that the temperature has been reset. So, the refrigerator should now work well without blinking.
As the temperature is resetting, give it a few minutes. Do not open the fridge’s door nor store items inside.
Remember, if the items are highly perishable, they can go bad before the fridge resets and works normally again.
Solution #10: Service your Refrigerator
Is your Samsung fridge blinking temperature even after trying the above fixing steps?
It could be that your device needs servicing. If you fail to service your fridge regularly, you may experience such issues.
Hence, it is high time you call an expert to check your appliance. If there is a bigger issue, they can fix it for you.
If the problem persists and your fridge has a valid warranty, you can call Samsung customer support.
Explain the methods you have applied to fix the issue. Then, they can help know what to do next.
Read Next: Can You Have 2 Roku Boxes in One House?
If your Samsung fridge temperature blinks, you might have allowed in hot air, which has raised the temperature inside to more than 590 F. Lower the temperature by removing any hot foods from the fridge.
Check if your fridge door air has holes and rectify them. Do not forget to defrost any excess frost from the freezer too.
For a Samsung fridge blinking temperature issue, you can apply the above methods to fix it. Mostly, high temperature is the leading cause of this problem.
So, lowering the temperature should have your device fixed. If lowering the temperature does not fix it, kindly have an expert check your device for you. It might be having a bigger problem.
- Kwikset Smart Lock Code Change – FoolProof Guide - May 25, 2023
- How to Connect Turntable To Marshall Speaker? - May 25, 2023
- Asko Dishwasher Not Drying? – Complete Fix Guide - May 25, 2023