If you’re looking for the process on how to connect WeMo Light Switch to WiFi, then we just have what you’re looking for!
Just like you, a lot of people are trying to figure out how they can connect their WeMo Light Switch to the internet!
For today, we will be guiding you through the steps on how you can do that!
You can connect your WeMo Light Switch to WiFi through your smartphone using the WeMo app. The process includes downloading the app, connecting your device and finally choosing the WiFi network.
Before we jump into that, is it required to connect and link your WeMo Switch to WiFi?
The WeMo Switch is actually just a regular switch with advancements. So, it’ll work like a regular switch. However, its remote access features would not be possible if it’s not connected to WiFi.
By connecting it to WiFI, you basically enable the advanced features that it can offer. From being able to remotely control it up to the routines and the actions you want it to do without touching it!
Now that we are aware of that, what is the complete process of connecting your WeMo Light Switch to the internet?
Whether you’re trying to set it up for the first time or you’re trying to find the process of how to connect your WeMo Light Switch to WiFi, this is what you’ve been waiting for!
The process of connecting or hooking your WeMo Light Switch up to WiFi is actually easy. And, the best part about that is it’s applicable to both the iOS and the Android platforms!
So, here’s how you can do it!
The first thing you must do is to ensure that the WeMo Light Switch is properly connected and installed.
Check everything from the wires and cables, down to the case and see if it’s installed appropriately.
After making sure that it’s properly installed, what you have to do next is to download the WeMo app.
It’s available for both Android and iOS devices, so you can use whatever smartphone that operates under these systems.
Once downloaded, you can proceed to the next step, which is…
On your smartphone, go into Settings > WiFi, and instead of choosing your home network, connect to the WeMo Light Switch device instead.
Tap on that to connect your smartphone to the device so that it’ll be capable of connecting to the WiFi.
NOTE: You’ll know that it’s the WeMo Light Switch because it’ll be labeled “WeMo.Light.XXX”
In most cases, when it connects, the WeMo app should be set up automatically. You no longer have to enable or toggle anything.
But, there would be instances where you’d have to manually open and access the WeMo app. Since your smartphone is already connected to the device, the initialization should be automatic, it’ll load and it’ll tell you to get started.
The app will tell you to give your WeMo Light Switch a name. Moreover, you can also choose a custom photo for it.
After that, click Next.
When you click Next, it’ll redirect you to the part where you have to provide and enter your email address.
It’s like letting the system know that you are the owner of the device. There’s also a note there that you can uncheck if you don’t want to be sold programs, offers, and the like.
Then, click on Next to proceed to the next part.
This would now be the page where you have to select the WiFi network that you want to connect to.
If you have multiple routers sitting around your home, choose the one where you want your WeMo Light Switch to connect.
Select the SSID or the WiFi router network name and input the password to connect.
Wait for a few moments for the device to connect, it should only take a few seconds. When it’s done, you’ll get a prompt discussing the firmware of the device.
If it’s asking you to update the firmware, click Yes. Otherwise, if it’s just letting you know that the firmware is up-to-date, you just have to click on Continue.
To conclude and finalize, you should see a checkmark on the WeMo Switch you just connected to WiFi. This is the sign that you were successful in hooking it up to the internet.
The process is easy and simple, right? But, what if your WeMo Light Switch fails to connect?
There are quite a few reasons why your WeMo Light Switch is failing to connect to WiFi. And, not all of them are due to the device itself.
The most common reasons include:
- The network settings (SSID and WiFi password) have changed
- Glitches and errors with the coding
- The internet connection is unstable
- The WeMo Light Switch needs to be restarted
Whether you’re trying this out for the first time or if you’re wondering how to reconnect your WeMo Light Switch to WiFi if it had this error all of a sudden, these are the steps that you need to do.
If it’s not connecting to WiFi, don’t immediately conclude that it’s the fault of the switch.
The first thing you have to do is to power cycle the modem or the router. You can do that by taking the power out of them for about 15 to 30 seconds before plugging them back in again.
After that, the next thing you want to restart or power cycle is the Wemo Light Switch. The restart button or bar of the WeMo light switch is placed beneath the cover plate.
You can take the cover plate out and press the bar or you can press it directly while the cover plate is there.
You simply have to press the restart bar for one (1) second, then release. You’ll know that the device is restarting when the WiFi indicator blinks green.
Then, the next step is to reset your WeMo Light Switch. You can reset it in two (2) different ways: Through the WeMo app or through the reset bar on the device.
Here’s the process of resetting it through the app:
- Access the WeMo app and hit on Edit
- Click on the arrow facing the right side and select Reset Options
- Choose Factory Restore
For manually resetting it, here’s what you should do:
- Press the Restart button for one (1) second then release
- Then, press and hold the Reset button for five (5) seconds
NOTE: You should press the reset button while it’s still blinking green.
Resetting or restoring it to its factory default settings makes it forget all data and information. So, you’ll have to follow the process of how to connect your WeMo Light Switch to WiFi again.
If all else fails, the most sensible thing to do is to contact WeMo’s customer support team and ask for their help and assistance.
You can easily link and connect your WeMo Light Switch to WiFi using the app. All you need is just the WeMo app installed and a stable WiFi connection.
Read Next: Why is WeMo Blinking Orange?
Should you be in dire need of assistance on how to connect WeMo Light Switch to WiFi, this guide will be all that you need!
We covered all the things you need to know about connecting your device to WiFi!
- Shark Robot Vacuum Obstruction Error? (7 Proven Solutions) - December 7, 2023
- My Dyson Hair Dryer Stopped Working? (7 Quick Solutions!) - December 7, 2023
- White Rodgers Thermostat Blinking Flame? (7 Proven Fixes!) - December 5, 2023