Have you seen the Wemo light switch not detected error on your app, and you fail to understand why it occurs?
Wemo is known for its advanced products in smart light switches, dimmers, and many others. To use any of these devices, you need to download the Wemo app on your device.
However, at times you may see a message, ‘Wemo light switch not found’ on the app. What would you do? Kindly get five minutes fixing methods below.
If your Wi-Fi router has frequency issues, or the Wemo app is outdated, and the device has a malfunctioning problem, you will have the Wemo light switch not detected error. Check that the router runs on a 2.4GHz frequency or use a different network.
Also, update your Wemo app, or restart the device to resolve the issue.
Reasons for Wemo Light Switch Not Detected
Several reasons can cause your Wemo app to fail to detect the light switch. Some of them include:
1. Poor Wi-Fi or Non-recommended Wi-Fi Frequency
If the light switch operates on a non-recommended Wi-Fi frequency or your WiFi signal is very poor, the app will not work.
2. An Outdated Version
The Wemo switch will fail to respond if your Wemo app is outdated. Old versions often causes issues.
3. The Device has a Defect
If the device has unresolved bugs, it will not be detected and hence you will face issues.
Note: To ensure that your Wemo light switch runs perfectly, ensure that your Wi-Fi is fast and always on point. This smart switch can only operate on this condition.
Now, we can get to the troubleshooting tips below.
How to Fix A Wemo Light Switch Not Recognized Error
Fixing this error on your device will not cost you your precious time. Below are several methods you can apply to go past this issue.
Remember, if method one does not work, you will be wrong to dismiss method two or three and so on. Kindly try each.
Solution #1: Restart the Wemo Switch
Your light switch could be having bugs that cause it not to be detected on the app.
One of the first solutions you should try when your Wemo light switch is not detected is to restart it.
After the process, you should have it detected and working well again. To restart it, close the Wemo app and turn off the Wemo light switch.
Turn on the switch again, then restart the app. Restarting removes any bug and hiccup on your Wemo switch, and when handling it, you will not face such problems again.
Solution #2: Power Cycle the Wemo Light Switch
If it still has the same issue after trying to restart your device, you may need to try power cycling it. The process is never a complicated one. Here is how you can go about it.
Take your Wemo light from the power socket. Allow it to rest for a minute, then plug it back in.
Once you plug in the light, it will automatically reset. After the process is complete, the bulb automatically connects to the Wi-Fi.
Hence, any issue causing the error message on your smart switch should be gone and have it working correctly.
Solution #3: Delete, then Reinstall the App
If your Wemo app has some bugs, your light switch will also have issues that will cause it not to be detected.
In most instances, you will need to uninstall the Wemo app then reinstall it.
Here is how you can uninstall it:
- Launch the home screen on your phone.
- Click the Wemo icon, then hold it. Other apps will begin to shake.
- You will see an X sign at the right corner of your app; kindly tap on it.
- A red delete button will appear. Kindly tap it to delete the app.
If you own an android phone, go to your phone’s settings, then click on apps. Select the Wemo app, then tap on uninstall to delete it from your device.
Once you successfully uninstall the app on your respective phone, you should install it again. The best thing about reinstalling is that you will get the app on its latest update.
Go back to your phone’s Google play store or app store, then reinstall the Wemo app on your android or iPhone, respectively.
Solution #4: Check your Wi-Fi Router
Your Wemo light switch depends on a Wi-Fi connection for it to work. So, if the Wi-Fi router has a problem, the switch will always have an issue too.
You will note a problem when an orange light blinks on the Wi-Fi status of your bulb.
Hence, your bulb will not connect to the internet because it has a hard time doing so, and the app will not recognize it.
Check the router and ensure that it is on a frequency of 2.4GHz. Note that any frequency higher than this, such as 5GHz, will give your switch an uneasy time to connect.
If you have any MAC or VPN filtering, check them to confirm that your Wemo light switch can connect the Wi-Fi router properly.
If the settings and everything else is okay, restart your router, then confirm that your switch light is running without issues.
If the router has any problem, you can opt for a better router that will not give you a hard time connecting to your light switch.
Solution #5: Factory Reset the Device
Factory resetting your device should always be your last option. As you know, it deletes every setting and configuration in your smart switch; hence you will need to set it up again.
However, it is a solution that should work if any of the above fails.
You can reset the Wemo light switch using two methods: one using the app, and the other you can do it manually. Let us see how to go about both of them.
Factory reset manually as shown below:
- Remove the light switch from its power outlet.
- Locate the reset button, then press it and hold it.
- Plugin your light switch as you continue holding the reset button, then release it after five seconds.
- The LED light will flash amber green to show that the device is reset.
Factory reset using the Wemo app by following these steps:
- Launch the Wemo app on your phone.
- Locate the ‘pencil’ or ‘edit icon’ on the screen, then tap it.
- Tap on the Wemo light switch.
- Select ‘ Reset options once the main menu appears,’ then click on ‘erase all content and settings.’
- Confirm your choice by tapping the Yes or ok button on your screen.
Your device is now reset. Check if it still has the same issue or is resolved.
Read Next: How to Fix Wemo Rules Not Working Issue?
If you have a Wemo light switch not detected error on your Wemo app, it could be due to an outdated app, a malfunctioning device, or Wi-Fi errors. Kindly update the app to run on the latest firmware.
Restart or reset the light switch to fix bugs and ensure that your Wi-Fi router frequency is 2.4GHz.
For a Wemo light switch not detected, you may not need to struggle with it. This is often a technical error, and you can always go past it using any of the tricks we have provided above.
So long as your Wi-Fi is on point and your Wemo app is updated, your device should be free of such bugs.
- Kwikset Smart Lock Code Change – FoolProof Guide - May 25, 2023
- How to Connect Turntable To Marshall Speaker? - May 25, 2023
- Asko Dishwasher Not Drying? – Complete Fix Guide - May 25, 2023