what does recovery mean on honeywell thermostat

Could it be your first time to use a Honeywell thermostat and want to know what does recovery mean on Honeywell thermostat?

If you are used to the normal heat regulators or programmable thermostats, you may not have seen them displaying recovery.

So, why should Honeywell show ‘recovery’? Does it have any advantages if it is in this mode? You can read below to understand more about your Honeywell thermostat in recovery.

When you see Recovery on your Honeywell thermostat, it is in the process of giving you the temperature you had preset. It begins working some time before the time you set to provide you with a cool or warm temperature at the exact time.

What Does Recovery Mean on Honeywell Thermostat?

When you disengage your thermostat for some time, it goes into resting mode.

When you engage it again, it works to achieve a higher or lower temperature opposite the surrounding temperatures. That is when we say the thermostat is in recovery mode.

So, when your Honeywell says so, you would not need to be worried. It is only working hard to give you the best environment that will cool you or warm you at the right time, unlike a normal programmable thermostat.

A recovery mode can also mean that the thermostat was in an energy-saving mode, but it is now going past the mode.

What Causes The Recovery Mode In Your Honeywell Thermostat?

Various reasons can cause your thermostat to be in recovery; some of them include:

  • You set the “recovery mode
  • Power surge may also cause the thermostat to enter recovery mode.
  • Your thermostat has an issue.
  • Your thermostat is not performing as it should.

Recovery mode is supposed to set your home temperature at an optimal state. If it fails to do so, it has performance issues.

Let us dive down to see the positive sides of your thermostat being in recovery mode. Does it have any negative sides and if we can override it.

Why Your Honeywell Thermostat May Be Stuck In Recovery Mode

recovery mean on honeywell thermostat

Unlike other normal or programmable thermostats, the Honeywell thermostat is different because of the recovery feature.

If you see it stuck on recovery, these might be the potential reasons.

1. To Have The Required Programmed Temperature At The Exact And Correct Time

Since you want your room to have a certain temperature at a specific time, your thermostat will get into recovery mode to achieve this.

However, the time it gets stuck will depend on the range between the programmed and the prevailing temperatures.

So, it may either work longer or shorter to achieve the temperature for the set time.

For instance, if the current temperature is below 400 F, yet you want a warmer temperature by 7 am morning, your thermostat will be in recovery mode constantly until it achieves the warmer temps.

2. To Help You Have Increased Efficiency

You do not need to keep on going to the thermostat to help it give you your desired temperature at a specific time. That is what recovery mode does for you.

Since you want a warmer temperature in the mornings and evenings but a cooler one in a hot afternoon, your thermostat will have to remain in recovery mode to achieve these variations during the day.

You need to set your values once during the day and leave the rest to the thermostat to work on.

3. To Show You That It Is Working

You may never know if your Honeywell thermostat is working if you do not see the ‘recovery’ visual on its display.

If it is in this mode, it shows that it is actively managing the HVAC system within your room to return or take the temperature to the level you wish.

So, even if you are away, the system can actively work to retain your residence’s temperature, but when you come back, you can adjust it.

The thermostat will read the outside temperature and keep on changing itself to gain the proper temperature that fits you when you step into your house.

So, this scenario shows that your thermostat is actively working all through.

What Does ‘In Recovery’ Mean On My Honeywell Thermostat, And Does It Have Any Benefits?

Take this scenario; you want to wake up at 5 am, and you want the temperatures around to be 700 F.

If you have a normal thermostat, you will wake up at temperatures lower than 700 F since it will begin heating at 5 am.

A Honeywell thermostat is different since the recovery feature allows it to begin heating the room sometime before 5 am.

So, the moment you wake up, the temperature is already at 700F. Hence, you will have achieved your desired warmth at the right time.

Below are some advantages of in-recovery mode.

1. It Conserves Energy

Most programmable thermostats like Honeywell are made to conserve energy or be energy efficient.

The temperature settings may have a significant variation causing the HVAC system load to increase, hence consuming more electricity.

When the thermostat is in recovery mode, its temperature raises or lowers gradually; hence the HVAC system load becomes even and consumes lesser power.

So, your thermostat conserves energy since it begins to work to reach the required temperature before the scheduled time.

2. It Conveniences You

Your Honeywell thermostat cools you or warms you only at the proper time. Remember, you must set it if you want it to do this at the time of your convenience.

If not, it will only start working at the scheduled time. So, you may have to wait until an hour passes to gain the proper temperature.

3. It Lessens The Load On The HVAC System.

Your Honeywell thermostat has a feature known as ‘’Adaptive Intelligent Recovery,” which places less weight on the HVAC system.

Hence, the system does not require sudden, large, and intense amounts of cool or warm air. The process can be very critical when it comes to two-stage cooling or heating systems.

When a thermostat has regular sudden changes in temperature, the HVAC system loads so much, leading to some components failing prematurely.

Is It Possible To Override The Recovery Mode On My Honeywell Thermostat?

Various reasons may cause you to disable your Honeywell thermostat, including if it is quite noisy.

It might also occur during the time you do not wish it to, such as at night which might disturb your sleep.

You can use the steps below to override it.

Step #1: On your Honeywell display screen, select Settings, then select Preferences.

Step #2: Click on ‘’Smart Response Technology’’ on the menu that appears.

Step #3: Press the ‘Off’ key. It turns off the system’s recovery mode.

Step #4: To check if the recovery mode is turned off, click the ‘’Previous Menu’’ option.

Step #5: Click Home.

You will go back to the screen and see that your Honeywell thermostat recovery mode is off. It will then strictly follow the schedules.

Your Honeywell thermostat is in recovery because it wants to give you your desired temperature at the exact time you wish to have it. It begins working to achieve this temperature before the set time.

Read Next: How to Fix Nest Thermostat Battery Low Message?


If you have been wondering ”what does recovery mean in Honeywell thermostat,” I hope you now know. It is not something to make you worried in any way. Instead, it is in this mode for only good reasons that work for your good.

So, if you see ‘recovery’ on your thermostat, know that it is working hard to achieve the set temperature early enough before the preset time.

Unlike a programmable thermostat that will start working during the set time to achieve your desired temperature, Honeywell in recovery will have reached there by that specific time.

Recovery on your Honeywell thermostat means it is working to achieve the preset temperature before the set time. Your thermostat will begin working intelligently sometime before your set time to accomplish this.

Nicole B