If Samsung sound bar not turning on with Samsung TV and you seem to struggle with fixing it, then you’ve come to the right place!
Here we will go through all possible causes and provide a solution for each.
Moreover, we’re revealing ways to prevent this issue in the future so keep reading to learn everything you need to know.
Samsung soundbar may not be turning on with Samsung TV if both of the devices aren’t connected correctly. If there is an issue with the Bluetooth, AUX, or optical audio cable that contains issues, you may be constantly having outages and disconnects.
There are even more possibilities that could be responsible for the issue so let’s take a look at all of them.
We assume that you have your soundbar connected to your smartphone via the Audio Remote app.
If not, go ahead and download it now to establish a connection, as you’re going to need it.
The app will allow you to measure the performance of the soundbar and access many other options you cannot control from your TV.
If your Soundbar is connected wirelessly, via Bluetooth to be exact, you can check out the causes for the issue down below:
1. Disabled Bluetooth
If the Bluetooth on either of your devices isn’t enabled, you may have trouble pairing your Samsung soundbar to your Samsung TV.
2. Soundbar Not Selected As Default Speaker
If the soundbar connected to your TV isn’t chosen as a default speaker, it may not produce any sounds until you configure this setting.
3. Low Volume
If the volume of your soundbar is turned all the way down, this may be the reason you’re getting no sound coming out of your device.
4. Pair Failure
Even with enabled Bluetooth, the pairing process may sometimes fail. You must make sure that under the name of your soundbar in the Bluetooth options within your phone, it says “Connected”.
5. Object Blocking Signal
If there is something in-between TV and soundbar that may interrupt the Bluetooth signal, you will get no sound coming out of your soundbar until further notice.
Now that we’re clear of the causes, let’s check what are the best troubleshooting methods to approach this issue with.
Before we proceed with troubleshooting, ensure that you have restarted your TV and soundbar using the remote.
A simple restart might sometimes be enough to resolve more major malfunctions, so try it before troubleshooting!
It is worthy to mention that Samsung soundbars are used to be controlled with Samsung TV remotes if all works right.
If your remote refuses to power both your TV and soundbar, its batteries are probably worn out or you’re not connected.
Even if that’s not the case, it is always healthy to keep the remotes in your remote new and fresh.
Change the remotes by carefully disassembling the compartment underneath your remote. Stick out the old batteries and insert the fresh new ones.
Moreover, while you’re replacing the batteries, we recommend carrying out a power cycle.
How To Power Cycle Remote?
While the batteries are out of the remote, press EACH button at least twice and then wait for about 5 minutes.
Once the time is over put the batteries (preferably fresh pair) in their compartment and test.
Now that you’re certain the issue isn’t coming from your remote, you can try performing a hard reset on both of your devices.
Follow the steps down below to hard reset your devices”
Hard Reset Samsung TV
- Turn off your Samsung TV using the Samsung remote.
- Unplug the power cord from the power source of your Samsung TV.
- Wait for at least 5 minutes for the best effect at hard reset.
- Plug the power cord back into the power source.
- Turn off your Soundbar using the Samsung remote.
- Press the power button once to ensure that it is turned off.
- Unplug the power cable if your soundbar has an adapter.
- Wait for several minutes and connect the power adapter back in.
Note: While hard resetting, remember to avoid using any power dividers and strips.
Plug all power adapters into a wall outlet to avoid possible power malfunctions with the power transmitting devices.
If your Samsung sound bar not turning on with TV remote it is most likely disconnected.
Many users sometimes think they have connected their Samsung TV with their Samsung soundbar, only to find out later that the attempt failed the moment they’ve tried to pair.
In this method, the first thing you want to make sure of is that the Bluetooth connection is working on both of your devices.
After all, you won’t be able to pair if your Bluetooth is not even turned on, so go to the Settings and make sure to enable it.
Now that you’re certain the Bluetooth is turned on, you can verify that connection with your soundbar by clicking on the connection name once
This will directly take you into an attempt of connection and if everything works well, your Samsung TV should immediately pair with your soundbar.
The next thing users mistake when they establish their Samsung soundbar is that they forget to select their freshly connected soundbar as a default audio device.
To configure this setting, follow the steps below:
- Go to the Settings on your Samsung TV.
- Locate the Sound tab and enter it by pressing the OK button once.
- Now go to the Output audio device feature and click the OK button once.
- In the Menu, scroll down until you find a connection named Samsung Soundbar.
- Click on it once and from now on your soundbar will be the default device your TV is going to use.
To reverse any of these dues, go back to the options list and select which device you are willing to use as a default from now on.
Lastly, you can try resetting your soundbar to default settings. Factory reset is well-known to be effective at all times, even when your soundbar is unable to work with your Samsung TV.
Note: Keep in mind that factory reset will erase all volume and sound configurations, so make sure to save anything you want to keep from being deleted.
Here are the steps to factory resetting your Soundbar:
- Make sure your Soundbar is up and running.
- Press and hold the Power button and the Volume button simultaneously.
- Unplug the power cord from the wall outlet.
- Plug the power cord back in.
At this point, your soundbar should be reverted to factory default settings and if the issue was related to a software glitch it should now be resolved.
Note: Many things could be interfering with your Samsung TV and soundbar.
From bad Bluetooth connections to hardware and software glitches, there are many possibilities.
You can troubleshoot the Samsung Sound bar not turning on with Samsung TV by hard resetting both your Samsung TV and soundbar, checking the Bluetooth connection, and restoring the soundbar to default settings.
Lastly, you can check the sound settings of your TV and select a default audio output.
Read Next: How to Fix Samsung Soundbar Display?
Now that you know why is Samsung sound bar not turning on with Samsung TV, we can freely admit that you’re fully capable of troubleshooting the issue at home.
Even if you find it challenging at some point, don’t hesitate and reach out for some extra assistance from the respective support team.
If you’re interested in more posts related to Samsung soundbar and TV, you can check out our technical blog to discover solutions for all devices in your smart home.
- Wyze Camera Making Noise? – (7 Proven Solutions!) - December 10, 2023
- Philips Roku TV Won’t Turn On No Red Light? (6 Quick Fix!) - December 10, 2023
- Shark Robot Vacuum Obstruction Error? (7 Proven Solutions) - December 7, 2023