Best Settings For Lorex 4K Camera – (Tested Settings)

If you want to use the best settings for Lorex 4K camera, keep reading!

In this post we’re going to provide you with the best Lorex 4k camera settings, depending on your preferences and situation.

Here you’ll find a description of what all settings do and how to use them for the most optimal experience possible.

The best settings for a 4K Lorex camera are the motion area, encoding mode, and higher resolution. For optimal performance use 60 FPS along with a 5000 bitrate and 8000 sampling rate. Configure the rest of the settings as per your preferences.

These were the essential settings, without which your camera footage might not be as good as possible. 

We’ll now jump into ALL of the settings and provide you with a clear description and recommendations.

What Are The Best Settings For Lorex 4K Camera?

So, you have a Lorex 4K camera and you’re wondering what are the best settings you can choose?

As we’ve mentioned earlier some settings are necessary for quality footage, as far as others are simply down to your preferences.

Note: Keep in mind that most of the settings are adjusted during the beginner setup of your Lorex camera.

Here are the best settings that you can use for your Lorex 4K camera:

Motion Area

One of the essential settings of your Lorex 4K is the motion area capture of the cameras.

That will let you define in which area of the camera’s POV you want the device to capture motion.

To customize the motion area, go to Lorex camera system > Recording settings > Customize > Motion Area.

Fill out the blocks of the motion area that you DO NOT want to be captured.

Schedule

Another setting you should configure is the schedule of your Lorex camera. You can set time intervals of the week whenever you want the camera to record or simply make it 24/7.

To configure the schedule settings, go to Lorex camera system > Recording settings > Customize > Schedule.

Press the cogwheel next to the camera you wish to change the schedule for.

Active Deterrence Settings

The active deterrence setting will allow you to detect people in front of your doorstep.

To change this setting, once again go to Lorex camera system > Recording settings, press NEXT, and then tap on Active deterrence.

Adjust the yellow area on your doorstep or wherever you want people/cars to be detected.

This setting will also enable your camera to detect cars, but you can disable it.

Resolution Settings

Although the Lorex 4K cameras adjust this resolution by default, you can change your camera’s resolution settings.

That is the frame rate of the recordings and the megapixels.

To adjust the resolution settings, open the Lorex home app and open the settings.

From there, access the resolution tab and individually configure each of your Lorex cameras that you want to change the resolution settings for.

Camera Mount Locations

Another essential feature you should have configured is the camera’s mount locations.

If you’ve installed the Lorex cameras in your garage, go to the Lorex home app > Devices > Camera settings and define where the camera is installed.

Repeat for all of your cameras.

Encode Mode

Once your Lorex 4K camera finishes a recording, it will be stored on the DVR under a certain encoding mode.

If you plan on using those files later via certain software, you must ensure that they are in the compatible encode mode.

You can change the encoding mode of the videos that your Lorex produces in the DVR settings.

Note: The default encoder that is recommended is the H.265.

What Are The Best Settings For Lorex Cameras?

The settings of your Lorex camera will define the resolution of the recordings, the camera’s power consumption, and other software-related parameters.

Note that most of these settings will go according to your personal preferences since most of them are either cosmetic features or settings that the camera can work without.

Here are the best settings that users have tested and recommended for your Lorex camera:

Bit Rate

All Lorex cameras share this same feature which is the bit rate of the recordings.

Generally said, the bit rate defines the quality of the footage that tends to be encoded and crystallizes it as much as possible.

You can change the bit rate of your Lorex recordings through the DVR settings.

You may leave the bitrate at around 5000 for optimal quality of your camera’s footage.

Frame rate

Your Lorex cameras can make footage from 5 up to 60 frames per second. The frame rate is how many frames in a second the footage is recorded.

For instance, 5 frames will cause the video to lag abnormally and is not recommended as a setting.

If you wish to reduce the camera’s frame rate or boost it, you can do it through the Lorex DVR settings.

Note: 60 frames per second, reach the smoothest experience.

Threshold Setting

The threshold setting of your Lorex camera determines how much of a motion is required for an event to be triggered.

This feature is identical to the motion sensitivity but not the same. The more you boost it, the more your camera will capture the slightest movements.

The recommended range for the threshold setting is around 30 to 90 in the Lorex home app.

Motion Sensitivity

The difference between the threshold setting and the motion sensitivity is that the threshold measures the amount of motion, while the sensitivity is related to the camera’s FOV.

As for the motion sensitivity setting, it is up to you how often you wish to be bothered with unnecessary movement.

You can adjust this setting in the Lorex home app.

Sampling Rate

Another feature that directly involves the quality of your Lorex camera’s footage is the sampling rate.

As for this feature, we suggest leaving it at 8000 for optimal performance. You can adjust this setting in the DVR settings of your Lorex home security system.

The best and most important settings to configure are the resolution (4K), the frame rate (60), bitrate (5000), and the encoder mode (H264). You should also enable the motion area as well as the motion sensitivity and configure everything else as per your needs.

Read Next: Why Is My Lorex Camera Offline On My Phone?

Bottom Line:

Now that you know what are the best settings for Lorex 4K camera, feel free to configure your device for optimal performance.

You might need some of the settings and don’t need others, this is why our post focuses on providing information about each and every setting.

Using our guide, set up your camera as per your requirements to enjoy the most optimal performance possible.

In case this post was helpful but if you have other technical questions, make sure to check our blog to discover the answer!