roku light on but not working

If your Roku light on but not working and you can’t figure out how to fix it, well you have come to the right post.

Here, we will discuss what might cause your Roku light to blink, but not work and what can you possibly do in order to prevent that issue from appearing again.

It is a common occurrence for the Roku light to be on sometimes even if the Roku TV isn’t working, so keep reading to learn what it takes to resolve this frustrating issue.

There are some simple steps you can apply to fix your Roku light. If your Roku stick is using batteries, open the corresponding compartment and remove the batteries.

You can try to remove the power cable connected to your Roku device, then wait for a short period of time, and reconnect it.

If this doesn’t work, we can try applying factory reset, which we will discuss in detail further in the article.

If none of these methods seem to help, make sure to keep reading as we will discuss some proven approaches that should definitely help.

Roku Light on But Not Working Issue?

roku stick light on but not working

If your Roku stick light is on but it doesn’t seem responsive to a given action, it might just require some simple troubleshooting steps.

This issue is common for many community guideline users and we have gathered information from people struggling with the same issue as yours.

Feel free to apply the following methods to both your Roku stick & device in order to resolve the frustrating issue.

Method #1 Replace the Batteries

It is common for such issues to occur when the batteries have aged enough to start impacting the signal.

If your Roku stick is running on batteries, make sure to change them regularly which results in a better signal and longer life of the remote itself.

In order to change the batteries of your Roku remote, as mentioned above, you must open the battery compartment and replace them with brand new ones.

This way, you will conserve the Roku stick’s life and also benefit from strong signal strength.

It is recommended to change the batteries regularly and avoid stagnation, which could result in more awful experiences such as battery leaking.

Method #2 Power Cycle Your Roku Device

A useful method to apply when your Roku remote light is on but not working is to perform a Power Cycle.

This way you can refresh the power that your Roku device is currently using and this action will eventually contribute to rebooting the light itself.

In order to perform a successful power cycle on your Roku device, follow the steps below.

  • Unplug the Power Cable from your Roku TV
  • Wait for around 3-4 Minutes
  • Re-connected the corresponding Power Cable
  • See if the issue is resolved


Keep in mind that the recommended waiting time after a power cycle is about 1 minute, but we recommend waiting a little longer for about 3-4 minutes to avoid unfortunate complications.

If this doesn’t seem to help, feel free to proceed with the next provided method, which will help you learn how to properly perform a Factory Reset on your Roku device.

Method #3 Factory Reset Your Roku Device

If none of the above-listed methods seem to resolve your issue, factory resetting your Roku device might be able to stop the problem from occurring.

Keep in mind that if you factory reset your Roku device, all of the stored data, such as files, movies, and temporary information will be permanently erased.

Important: In that regard, before performing a factory reset, make sure to save anything you want to restore easily afterward.

Performing this method might resolve any issues based on your Roku stick’s light and eventually grant you a bug-free experience.

Keep in mind that malware on your Roku device could also affect your remote’s light, so make sure to apply this method correctly.

Having all that in mind, we shall now move to the essential factory resetting process and how to properly perform it.

  1. Grab your Roku remote, and hit the Home button.
  2. Scroll up/down until you locate the Settings tab.
  3. Click on System.
  4. Select Advanced System Settings.
  5. Navigate to Factory Reset.
  6. Next, choose to erase Everything as follows.


Keep in mind that if you are using the featured Roku TCL TV, it is recommended to choose everything to be erased, in other words, “Clean Reset”.

This way you could also remove any malware or harmful software that could also cause your Roku stick light on but not working issue.

Then, wait a few minutes for the factory reset to perform and see if the issue persists.

If this doesn’t seem to resolve your issue, feel free to proceed with our next method.

Method #4 Restart Your Roku

There are two efficient methods of restarting your Roku device and in most cases, both share the same results.

The first method will show you how to restart your Roku system and the second how to restart it again, but when your device is either unresponsive or just frozen.

Follow the steps below in order to perform a system restart on your Roku device.

How to Restart Roku?

The way you can restart your Roku device when you can interact with the options themselves is really simple.

Execute the steps as following:

  • Press Home on your Roku remote and head to Settings
  • Next, navigate to System and then click on System Restart
  • Use the Directional Pad your remote is provided with, and press the OK
  • Wait for your Roku device to Restart

Next, wait for a few moments and see if the issue is resolved. If unfortunately, you are unable to navigate due to the Roku remote light is on but not working, feel free to keep reading.

How To Restart Roku When Frozen?

If sometimes your Roku device seems unresponsive or just freezes, and the light on the gadget is still intact, there is a simple way to restart the device without actually having to look for anything.

The simple steps we are about to share with you will help you fully reboot Roku’s system and eventually resolve your issue.

Follow the steps below in order to perform a restart on your Roku device.

  • Hit the Home button five consecutive times
  • Press the Up arrows once
  • Hit the Rewind button twice
  • Press the Fast Forward button two times

If you had performed these steps correctly, after waiting for a few moments, your Roku device should now restart.

This method should be able to deal with the frustrating issue and eventually resolve it.

We recommend restarting your Roku device once daily to avoid unwanted experiences such as this one.

This way your device will avoid any issues related to heating.

Bottom Line

After having all of this in mind, the Roku light on but not working should not be an issue for you anymore.

Each of the troubleshooting methods we have listed above is proven to work and is shared by users struggling with the same issue as yours.

If you are interested in related Roku articles, make sure to visit our technical blog where you will definitely find something interesting to read.

Read Next: Should you remove Roku stick when not in use?

Nicole B