How To Turn On Bush TV Without Remote? – (Easy Options)

Can’t figure out how to turn on Bush TV without remote? It is quite challenging, but not after reading this guide because we will unwrap different easy methods to help you command your smart TV.

So, after reading this short read, you will no longer need the physical remote in hand.

One easy way to quickly turn on your Bush TV is to use the built-in power button on your Bush TV.

Moreover, you can also control your TV by using the buttons on a connected TV cable box or gaming console or using the digital remote in the Bush smart application!

Let’s move forward to discuss more!

Can You Turn on Bush TV Without a Remote?

Yes! Turning on a Bush TV without a remote control is entirely possible!

Bush TVs typically have a physical power button underneath the logo or at the side panel to turn it on directly without needing the remote.

This is the best and most time-saving approach to turn on your TV using a single button on your device. 

However, some older TV models have no built-in power button, so you must uncover other ways to control your TV without a remote.

So, here are some of the workarounds you should attempt:

• Use the smart Bush app
• Replug (for older models)
• Use a PlayStation 4 or 5
• Use a Nintendo Switch
• Use any Universal Remote

These are the best methods to turn on your Bush TV without having a physical remote. Let’s quickly go through each workaround in detail…

How to Turn on Bush TV Without Remote?

Note: Make sure to go through every approach and choose what suits you best!

1. Use the Power Button

Like every Smart TV, Bush TV has a physical power button by default, that is, an ON and OFF control switch to turn your smart TV.

This button is mainly located underneath the Bush logo or on the backside of the TV panel, so you must inspect your Bush TV to discover this!

Here is how you can turn on your TV using the power button: 

1. Find the power button on your Bush TV. 
2. Firmly press the button using your finger.
3. Hold the button until your TV LED lights up.
4. After that, wait a moment for the TV to boot. 
5. Your Bush TV should turn on automatically.

Tip: When you want to turn off your smart TV, press the power button again!

2. Use a PlayStation (4 or 5)

If you have no idea how to turn Bush TV on without a remote, if you have a PlayStation at home, then you should worry no more!

Another way to turn on your Bush TV is to use a PlayStation (4 or 5) and an HDMI cable that you must use to connect the console to the Bush TV.

From there, we’re going to use a setting called “HDMI device link,” allowing you to control your Bush TV by using your PlayStation unit!

To turn on your TV using a PS4, follow these steps below:

1. First, acquire access to a working HDMI cable.
2. Unplug your Bush TV and PS from the power.
3. Connect the HDMI cable to the Bush TV’s port.
4. Connect the other end of the HDMI to your PS. 
5. Plug the PS into the power source to turn it on.
6. Then, access the “home screen” on your PS.
7. Open the “Settings” and go to “System Settings.”
8. Find and select the “Enable HDMI Device Link.”
9. Select the checkbox to enable the HDMI link.

Once you are done, turn off your PlayStation 4. Then, start your PS4 again by pressing the “PS” button on the center of your PS4 controller.

Your Bush TV should turn on along with the console!

Still Struggling?

If you are having trouble accessing the settings menu on your PS4 when connected to your Bush TV over an HDMI connection, connect another device to your PS4 and enable the “Enable HDMI Device Link” feature.

Then, you can reconnect your PS4 to your Bush TV.

3. Use the Nintendo Switch

If you have a Nintendo Switch at home, you can use the handheld console to turn on your Bush TV without having a remote control.

This is very easy and works almost the same way as with the PlayStation, so if you’re unfamiliar with the process, follow the steps below…

To turn on your Bush TV with Nintendo Switch, follow these steps:

1. First, unplug your Bush TV for safety purposes.
2. Get access to a dock for setting up a connection. 
3. Connect your Nintendo Switch to your Bush TV.
4. Then, plug the dock into the power source or outlet.
5. Go to the “Home Screen” of the Nintendo Switch.
6. Go to the “Settings” and select the “TV Settings.” 
7. Find and enable the “Match TV Power State” option.

Then, hold the controller of your Nintendo Switch and press any button on it to turn on your switch along with your Bush TV.

Remember that your devices may take time to turn on, so be patient before concluding!

Tip: When your Bush TV powers on, stop the “Match TV Power State” option on the Switch, so the smart TV won’t power off along with the Nintendo Switch.

How to Turn on Bush TV Without Remote or Buttons?

Turning on a Bush TV without a remote or physical button can be quite challenging, but not after following this guide. 

Don’t worry if you are looking for a legitimate way to turn on your Bush TV without a remote and power button, don’t worry.

The Bush TV remote app is one of the most handy solutions to control your device from your phone.

Info: The app and steps to connect your smart TV may differ because Bush TVs are available in both Fire and Android OS.

Turn On Bush (Android TV)

If your Bush TV is running on an Android OS, you need to download the third-party Bush TV remote app on your Android phone to control and turn on your smart TV.

Here are the steps to turn on Bush Android TV using the app:

Note: Ensure your Android phone and Bush TV are connected to the same Wi-Fi!

1. First, go to the Google Play Store on your phone.
2. Search for the “Bush TV remote” in the search bar.
3. Press on the “Install” in order to download the app.
4. Then, open the Bush TV app on your smartphone.
5. Your app should automatically detect your Bush TV.

When the Bush remote app finally connects to your Bush TV, look for the power button on the top right corner of the app to turn on your Bush TV.

If the app fails to detect your Bush TV, then follow the on-screen instructions to connect your app to the TV manually.

Turn on Bush TV (Amazon Fire)

If you have a Bush Fire TV, then you need to download the official Amazon Fire TV app to control and turn on your device.

Remember that, like other remote apps, it also requires the same WiFi connection on your Bush Fire TV and mobile device.

Here are the steps to turn on your Bush Fire TV using the app:

1. First, go to the Google Play Store or App Store.
2. Search for “Amazon Fire TV” via the search bar.
3. Download and install the Bush app on the phone.
4. Then, open the Amazon Fire app on your device.
5. Enter the correct details of the Amazon account.
6. Then, sign in to the app to access the app controls.
7. Choose your Bush Fire TV device on the screen.
8. Follow the on-screen prompt to connect the device.

Once you are done setting up, press the “Alexa” button from the top center of the app. Then, say, “Alexa, turn on the Fire TV” to your Alexa device.

Universal Remote?

It can be frustrating sometimes to control your Smart TV using your phone, especially when the internet connection is down.

We recommend purchasing a new physical or universal remote as a permanent solution.

Tip: When purchasing a universal remote, check the compatibility of your Bush TV!

Quick Recap:

Thus, now you know how to turn on Bush TV without remote, by simply using the inbuilt default power button, gaming consoles, or remote mobile apps.

Moreover, you could buy a universal remote, which you can pair with the Bush TV and regain the TV controls.

If you find this post helpful, follow us for more Bush TV guides!