Are you wondering why won’t my Bush TV connect to WiFi? Well, this one would be such a headache, especially when a BT TV is not connecting over and over again.
No worries, this issue is easy to solve, and here, we’ll explore the top-tier solutions and get the TV back online!
When your Bush TV is not connecting to the WiFi, inspect the network options, close the wireless proximity, resolve interference, and perform a factory reset on your TV.
Let’s learn more about the Bush TV connectivity problem!
Why Won’t My Bush Smart TV Connect to WiFi?
If you have a Bush TV and can’t connect to the WiFi network, the underlying problem can be a poor internet connection or even a temporary software bug.
So, it’s crucial to identify if the problem is specifically with your Bush TV and whether other devices can connect to the WiFi.
Here is a list of all possible reasons why Bush TV is not connecting to WiFi:
Let’s jump right in to start troubleshooting quickly!
Why Won’t My Bush TV Connect to WiFi? – Fixed in Minutes!
Note: We recommend thoroughly going through the solutions!
1. Connect to the WiFi (Correctly)
The first step should be to re-attempt connecting your Bush TV to the WiFi, but this time, follow the correct steps for the setup.
This is important because there is a good possibility that you’re not doing something right, which is why the Bush TV can’t connect to your wireless network.
Here’s how to connect Bush TV to the WiFi correctly:
- Press the “Home” button on your Bush remote.
- Scroll down in the menu and select “Settings.”
- In the settings menu, scroll and select “Network.”
- Scroll and set the “Network Type” to “Wireless.”
- Go down and enter “Scan Wireless Networks.”
- Go down to your WiFi network and press “OK.”
- Enter the correct password in order to connect.
This is the correct way to connect your Bush TV to the WiFi network to get access to all online stuff.
If the problem persists, don’t panic and jump to the next solution from the troubleshooting!
2. Power Cycle Bush TV & Router!
When your Bush TV doesn’t connect to Wi-Fi, one of the most efficient ways to address the fault is by power cycling both the TV and the network router.
Although this step is simple, it frequently resolves all network-related problems and restores the functionality of your WiFi and internet.
Here are the simple steps to power cycle your devices:
How to Power Cycle a WiFi Router?
- Unplug the router from the wall outlet.
- Then, wait for at least 3 to 5 minutes.
- Plug the router back into the wall outlet.
How to Power Cycle any Bush TV?
- First, press the power button to turn off the Bush TV.
- Then, disconnect your Bush TV from the wall socket.
- Next, press and hold the button for about 30 seconds.
- Leave your TV unplugged for 5 minutes to discharge.
- Connect your Bush TV directly to the electrical outlet.
When you’re ready, attempt to connect to your WiFi network on your Bush TV correctly.
If the problem persists, check the same WiFi network on your other devices to determine whether the internet is accessible and whether your wireless network is working on different machines!
3. Check the Date & Time Settings!
Most users avoid this factor, but if your Bush TV is set to an incorrect date and time, this can cause IP expiration issues and prevent your device from connecting to the router.
To check if that’s the case, go to your TV settings menu and ensure the date and time are set correctly.
Here is how to check the date and time settings:
- First, hold your Bush TV remote control.
- Press the “Menu” button on the remote.
- Scroll in the menu and select “Settings.”
- Scroll down and select the “Date/Time.”
- Go and choose “Time Settings Mode.”
- Set the time settings mode to “Manual.”
- Manually adjust your TV Time settings.
- Manually adjust your TV Date settings.
- Finally, press the “Menu” button to exit.
The next step is to go to the network settings on your Bush TV, make sure the network type is selected “Wireless Device,” and then scan for the networks. The Bush TV should now connect.
4. Clear Physical or Signal Intrusion!
When Bush TV not connecting to WiFi, the culprit may be interference or wireless obstructions!
It can be a physical or signal interference such as a congested network, slow internet speed, weak signals, or interference from other external devices.
Well, it’s possible to quickly address such problems immediately by considering some necessary actions.
Here’s how to resolve any sort of WiFi interference, congestion, or obstruction:
- Disable any activated VPN or Proxy on the devices.
- Stop downloading/uploading on your WiFi devices.
- Turn OFF the “Mobile Data” on your mobile phone.
- Disable nearby WiFi adapters or Bluetooth devices.
- Power OFF any nearby electronic devices to the TV.
- Reduce the distance between the router and Bush TV.
If your WiFi connects to your other devices but not to your Bush TV, this can be due to the weak signal strength.
In such situations, install your WiFi router and TV within 10 feet of the wireless router, otherwise, use WiFi extenders/boosters to extend your WiFi signal strength in the home!
5. Check for Router MAC Address Filtering
Another reason why the Bush TV can’t connect to the WiFi could be permission to the MAC address filtering on your wireless router.
If the MAC filtering is enabled on your router and you haven’t added the MAC address, then your Bush TV is not connecting to the internet even if your device is connected to the WiFi.
Here is how you can check for the MAC address filtering:
- First, connect your PC/ laptop to the WiFi router.
- Then, launch an online browser on your device.
- Enter http://192.168.0.1/ or http://192.168.1.1./.
- Sign in using the admin credentials of the router.
- Info: Try with admin/admin or admin/password.
- Go to the “Wireless” or “Wireless Security” tab.
- Look for the “MAC Filtering” option in the settings.
- Tap on the toggle button to stop the MAC filtering.
- Lastly, tap the “Save” button below to save changes.
Tip: When you finish these steps, power cycle your WiFi router and then try to connect the WiFi on your Bush TV.
6. Switch to 2.4 GHz WiFi Frequency!
If your WiFi network is congested or overloaded, your Bush TV may have difficulty connecting to the WiFi router.
If your router is dual-band, feel free to attempt and connect your Bush TV to the slower but more stable 2.4 GHz WiFi instead of the faster but weaker in strength 5 GHz!
Note: The 2.4 GHz WiFi is lower but travels further and covers much more ground and rooms in your home compared to the 5 GHz WiFi frequency.
7. Set Up a Wired Network Connection
At this point, we recommend you switch to a wired network connection when your Bush TV is not connecting wirelessly.
This is an excellent approach to ensure a stable and reliable internet connection, bypassing all of the WiFi limitations.
Here’s the way to connect to the Ethernet connection on your Bush TV:
- Turn off and unplug your Bush TV from the power.
- Connect the Ethernet cable to your router and TV.
- Then, press the “Home” button on the Bush remote.
- Next, scroll down in the menu and select “Settings.”
- In the settings menu, scroll and enter the “Network.”
- Then, set the “Network Type” to “Wired Connection”.
- Your Bush TV will now be connected to your network.
If this step doesn’t work, there is something wrong with your TV itself!
8. Factory Reset Your Bush TV
If all the above solutions do not work and your Bush TV is still not connecting to WiFi, it’s time to perform a factory reset.
This solution will revert your Bush TV settings to the default state to let you start fresh, connect to the WiFi from scratch, and resolve the issue.
Warning: The factory reset will remove all Bush TV configurations and preferences!
Here is how to perform a factory reset on Bush TV:
- Push the “Menu” button on your remote.
- Scroll right into the on-screen menu list.
- Select the “Install and Retune” section.
- Then, choose “First Time Installation.”
- Select the “Yes” to confirm the selection.
- Press OK on the remote to start the reset.
When your television has been reset, and it’s fresh for connection, configure your Bush TV by following the on-screen instructions.
If you’ve attempted everything in this guide but nothing helped, you need to contact Bush Support for more help. Best of luck!
Quick Recap:
The reason why won’t my Bush TV connect to WiFi is due to a fault with the TV network settings or with the network device.
The solutions involve power cycling both the WiFi router and the Bush TV, disabling the MAC filtering, and performing factory restoration!
Follow us for more Bush TV content and troubleshooting!
