best picture settings for sony bravia 4k

What are the best picture settings for Sony Bravia 4K? Keep reading to find out!

The tested optimizations we are going to provide you with are by far the best settings you can run on your Sony Bravia 4K!

We’re going to explain in detail what are the pros and cons and help you configure the best picture settings for your 4K TV.

There are two recommended picture settings configurations you should take care of, the general and advanced. For better picture quality you should disable the smooth gradation, Motionflow, line motion, black corrector, and live color. Make sure to also flip the edge enhancement and the SBM for extra performance.

That’s just a small fraction of all settings you can tweak towards better picture quality.

Next, we’re going to describe each option and then how to configure it for optimal results.

What Are The Best Picture Settings For Sony Bravia 4K?

settings for sony bravia 4k

Your Sony Bravia 4K TV has general and advanced picture settings available for customization.

The setups we’re about to provide will both include intercepting the advanced and general features.

Note: Keep in mind the configurations we’re about to provide might not match with the environment you’re using your Sony TV for. 

You should consider whether you’re going to be using the TV for gaming, sports, movies etc…

Having that said, let’s learn the optimization of the general settings for your Sony Bravia 4K, recommended by the users for best performance.

The Best General Settings Config

general settings bravia 4k

As we’ve stated above, your TV’s features divide into general and advanced settings you can gain access to.

You will be able to access these features in Menu > Settings > System Settings > Display/Picture Setup.

Down below are all of the general (basic) picture settings, you should optimize on your TV:

Picture Mode

The picture mode is preset, which will adjust the overall quality of your TV’ screen.

We recommend either using the Cinema preset, or the Movie preset for regular use. Try out also the Sports, Dynamic or Vivid presets to choose the best for your sessions.


We recommend turning the sharpness all the way down. It basically means how sharp the edges would be.

If your screen feels too blurry at 0%, check the performance at 50%.


The contrast is the luminance of the darkest black and brightest white.

We recommend setting the contrast to 50% but depending on what you’re doing you might need it lower.


It adjusts how red and green images on your screen appear. We suggest turning the hue and tint all the way to 0% for better motion and color optimization on your Sony TV.

Screen Fit

The Picture Size/Overscan or with Sony, called “Wide Mode” has to be configured for better screen performance. In your picture settings, make sure the “Wide Mode” is at “Full”.


The transitions from white to black and the gray in between. For optimized usage, we suggest using a 2.2 proportion of gamma.


Your Sony Bravia 4K is most likely to have a blacklight feature for the daytime and nighttime cycle.

Use it at 100% during the daytime, but otherwise, whatever setting of this feels comfortable for your eyes.

Those were all of the general features you will want to take care of on your Sony Bravia 4K.

Let’s now review what advanced configurations must be changed for better overall picture quality.

The Best Advanced Settings Config

advanced settings bravia 4k

Here are the best picture advanced settings for Sony Bravia 4K. Some of these features have to be disabled, others you may leave enabled.

However, here you’ll learn what each option does and whether you need it or not.

Advanced settings could be found in Menu > Settings > Display Settings > Picture Adjustment Controls > Advanced.

Follow the bullets below to learn what these settings do and how to configure them:

1. Noise Reduction

This option reduces the noise in the picture without impacting the resolution.

It is recommended to keep the noise reduction to the offside for overall better display visibility. You can always tweak this setting as per your requirements.

2. MPEG Noise Reduction

While you’re at the noise reduction, make sure to also flip off the MPEG noise reduction, in case it has been enabled.

It applies to a certain group of video files with a MPEG container.

3. Dot Noise Reduction

Also disable the Dot noise reduction, since it could cause disruption in the dot noise when found in-frame.

4. Reality Creation

It delivers a better rendition of picture objects. We recommend disabling this feature to improve performance since the naked eye would not recognize any change at all.

5. Detail Enhancer

This feature will improve the edges of the picture objects. You can disable the detail enhancer to preserve your TV’s performance, but you can also let it work as picture quality improves.

6. Live Color

Provides more lively colors to the picture. If you’re targeting better performance, disable this feature. If you’re looking for better image colors, enable the setting.

7. SBM

Flip off the SBM, since it is related to a Blu-ray Disc, and smoothens the graduation. It’s an option that most users do not use on a standalone TV.

8. Edge Enhancer

Enhances the edge contrast of the image. The picture quality improvement can be easily noticed when this option is enabled but it greatly impacts the framerate.

9. Auto Light Limiter

This feature will reduce glare on occasions where the entire screen is white. Feel free to leave this feature turned ON, it does not impact performance.

10. Cline Motion/Motionflow/Black Corrector/Clear white

Disable all of these features as they are not creating a significant difference and are used in very specific scenarios.

However, they can greatly reduce performance, so it’s recommended to be disabled.

11. Motion Interpolation

Artificial refresh rate alignment to the content you’re viewing so it can match your TV’s refresh rate.

12. Smooth Gradation

This feature reduces pixelation.

This is the best settings configuration that many users utilize for their Sony TVs in general and the Sony Bravia 4K.

If you wish to optimize your Sony TV for usage with Wii, proceed with the instructions down below.

The Best Picture Settings For Wii On Sony Bravia 4K?

best settings for sony bravia 4k

Since Wii is mainly meant for gaming, we will provide you with the best configuration in regard to faster FPS, better motion performance, and radiant colors.

Check the settings configuration down below to get a better understanding of the most optimized Wii settings on Sony Bravia 4K.

  • Picture Mode – Game
  • Black Level – 50
  • Gamma – “-2”
  • Brightness – 9
  • Auto Local Dimming – High
  • Cine Motion – Auto
  • HDR Mode – Auto
  • HDMI Video Range – Low
  • Color Space – Auto
  • Contract – 100
  • Color – 49
  • Hue – R1
  • Sharpness – 0
Note: Any of the remaining advanced optimizations should be already set by the previous guide for better optimization and faster frames per second. 

If you haven’t applied the initial performance settings, scroll up and adjust them accordingly.

That will make sure you’re using the best possible picture settings for your Sony Bravia 4K in combination with a Wii.

You may also like to read our following helpful articles:

  1. How to Change Input on Sony TV without Remote?
  2. Do Universal Remotes Work on All TVs?
  3. Can I Leave My TV On All the Time?

Bottom Line:

The best picture settings you can get on your Sony Bravia 4K are by disabling all of the advanced settings for better overall performance. For picture quality, use lower radiant settings for better visibility and color.

Tip: To get a good optimization for Wii on Sony Bravia 4K, disable all advanced settings and leave the motion optimizations at “Auto”.

Now that you know what are the best picture settings for Sony Bravia 4K, we hope you were able to optimize your experience.

After all, especially the picture settings, are strongly dependent on the user’s preferences, so feel free to test each setting and device for yourself.

Nicole B