Are you having challenges with your AirPods cutting in and out? This problem often comes from poor Bluetooth connectivity.
When your Bluetooth connection is interrupted by other signals such as Wi-Fi and microwaves, it will make the connection poor and disconnect from time to time.
You can remedy this by changing your Bluetooth settings on the device for the best connectivity. You can also disconnect them and reconnect to ensure they aren’t connecting to another device. Additionally, you can reset the AirPods and make new settings.
AirPods are a popular listening media for many iPhone owners. Interruptions can be quite annoying.
This signal interruption problem will often happen when you receive calls through your AirPods.
In this guide, you will learn what causes this problem and how you can correct it whenever it arises.
Most Probable Reasons Why AirPods Keeps Cutting In and Out?
Sometimes your AirPods will disconnect from your device while you listen.
Although its developers have released software updates to correct this problem, it can still arise.
Here are some of the reasons that will bring up the problem:
Interference by other Signals
As mentioned earlier, Bluetooth connections are affected by other signals being transmitted. These include Wi-Fi or microwave in your surroundings.
Outdated Software on your iPhone
If you use an outdated operating system on your iPhone, it could cause disconnections. This problem is common with the 2016 to 2018 AirPods models.
Faulty Ear Detection Sensors
The ear detection sensors allow your AirPods to come on whenever you wear them.
If the sensor is faulty, it will have challenges in making the connection and often come in and out.
Incorrect AirPods Configuration
Users can configure their AirPods for their preferred listening experience. Incorrect settings will, however, interfere with connectivity.
It is also possible that your AirPods have run out of battery and thus the connection problem.
This is an important factor to look into while finding out why are my AirPods cutting in and out. Now that you understand the causes, you can correct them.
AirPods Cutting In and Out – Solutions
Before trying out these solutions, you should ensure your AirPods are fully charged. Once the problem persists, you can use these solutions.
Solution #1 Check Bluetooth Settings
AirPods will connect to your device through Bluetooth. Whenever a problem arises it’s best to first check your Bluetooth settings to correct it.
You can check its settings to ensure it is discoverable and doesn’t turn off accidentally.
This is how to check your Bluetooth settings:
- Click on Settings and select Wireless Connections.
- Select Bluetooth and turn it on.
- Open Bluetooth settings and activate the Discoverable option.
- Once the option turns green on your iPhone, save and close.
Once turned on, your AirPods will become discoverable on your iPhone, and you can connect easily. It will also resolve the disconnection problems.
Solution #2 Disconnect and Reconnect AirPods
A common solution to fix hardware problems in devices is restarting them.
This could also work to solve your why do my AirPods keep cutting in and out problems.
Here is a simple procedure to guide you:
- Open the Bluetooth connection on your device and turn it off.
- Return the AirPods into the charging case.
- Wait for about 30 seconds for the connection to cut off completely.
- Now, turn on Bluetooth on your device.
- Remove the AirPods from the charging case.
- Reconnect AirPods to your device.
Note: You can try out this solution several times in case it doesn’t correct itself immediately.
You should also ensure your device is discoverable on other Bluetooth devices for effectiveness.
Solution #3 Reset AirPods
Resetting your AirPods will help correct any recent settings that might cause this problem.
This solution is fast and reliable, and you can reset your AirPods whenever you encounter similar problems.
Here’s how to reset your AirPods:
- Turn off Bluetooth on your device to disconnect AirPods.
- Insert the AirPods into the charging case and close it.
- Locate the setup button on the back of the case.
- Press and hold on to it for about ten seconds.
- Wait for an Amber light to flash and later on a while light.
- Your AirPods are reset, and you can reconfigure them correctly.
You can now reconnect to your device, and the problem will be fixed.
Solution #4 Turn off the Automatic Ear Detection
The automatic ear detection option on your AirPods allows for automatic connection when you put them on.
Although it is convenient, it could cause connection challenges. Disabling this option can help fix the problem.
This is how you can turn the option off:
- Go to the Settings option on your device and Click on Wireless connections.
- Select Bluetooth and select the I button that appears next to it.
- Locate the Automatic Ear Detection option and disable it.
- Save Changes and close the settings menu.
Note: Once settings are saved, you can reconnect the AirPods.
Going forward, you will have to connect your AirPods manually while this setting is disabled. It will, however, help with the disconnection problem.
Solution #5 Check Batteries
When your AirPods are on a low charge, they can easily disconnect from your device.
Your device will also try to save power as configured in its settings, and thus your Bluetooth connection will be affected.
You can thus check the power levels to know when to recharge them and correct the problem.
This is how you can check your battery status:
- Insert your AirPods into the case and bring them closer to your phone.
- Open the case lid, and a popup will appear on your screen indicating the level.
- If batteries are low ensure you fully charge them.
- Use company-manufactured charger when charging.
Note: You can use this solution to ensure your AirPods are always charged.
In case the levels are too low, disconnect it from your device and recharge. Once full, you will not have to worry about why do my AirPods keep cutting in and out.
Solution #6 Check for Wi-Fi or Bluetooth Interferences
Signal interruptions can bring about connection problems. This is especially from other wireless connections around you.
The most common of these is Wi-Fi and a Bluetooth signal from other devices. You can move closer to your device to reduce interruptions.
Additionally, you can turn off Bluetooth on devices you aren’t using to ensure there aren’t any interruptions.
Finally, change the signal settings on other devices to 5GHz to reduce 2.4GHz connections for fewer interruptions.
Read Next: Why Is Left AirPods Mic Not Working?
Are AirPods Still Cutting In and Out?
You have tried all these solutions, but your AirPods still have connection problems? This is what you can do!
In this case, you can contact Apple for additional configuration options and any required repairs. If you have a valid warranty on the AirPods, you can take them back to the store for a replacement or proper repairs. This will ensure your AirPods cutting in and out problem is fixed.
AirPods are a convenient way to connect to your device and make calls or listen to your audio.
Due to signal interruptions, however, you can get the AirPods cutting in and out problems.
This step-by-step guide will help you correct these problems and enjoy a stable connection.
- Blink Live View Not Supported? – Complete Fix Guide - December 3, 2022
- Chefman Electric Kettle Won’t Turn On? – Fix Guide - December 3, 2022
- How to Fix Nanit Night Vision Not Working? – Complete Fix! - December 3, 2022