why won't my airpods connect to zoom

If you’re asking “why won’t my AirPods connect to Zoom” look no further!

In this guide, you will get familiar with all possible causes that are preventing your AirPods from being connected to Zoom.

Moreover, you just found the best fix solutions out there, recommended by AirPods users along with Zoom themselves!

AirPods may not be connected to Zoom if they are already paired with another device. The AirPods will also not connect to Zoom if their battery is running out or the settings configuration of Zoom is problematic.

If that wasn’t enough for you to clearly understand what has gone wrong with the connection between your AirPods and Zoom, keep reading as we unveil the causes in proper detail.

Why Won’t Zoom Connect To My AirPods?

See, Zoom has its audio settings on its own. If not configured the correct way to discover your AirPods, you will have a hard time getting your AirPods connected.

However, the secrets behind this problem were unveiled and are quite simple to be solved.

Here are the occasions where you will be unable to connect Zoom to your AirPods:

1. AirPods Already Connected

If the AirPods are already paired with another device rather than Zoom, they will not be discoverable by the application.

2. Inappropriate Zoom Settings

You shouldn’t have another audio device acclimated to Zoom, cause your AirPods will remain undiscovered.

3. AirPods not Connected to the Device

For the AirPods to become available as a selection in Zoom, they must be first connected to your laptop, phone, or device.

4. AirPods Not Available

If the batteries of your AirPods have run out, they will get disconnected from all receivers, including your Zoom аpp.

5. Outdated AirPods

There is a chance that your AirPods model has dropped out of support and is not eligible with the preferences set by Zoom.

Those were the factors that you should be aware of. Let’s now build up our solution guide to get your AirPods connected to Zoom as quickly as possible.

How To Fix AirPods Not Connecting To Zoom?

fix airpods connect to zoom

We will first guide you through how to properly set up your AirPods to the device you’re entering Zoom from.

Don’t forget that your device works as a mediator for your Zoom and AirPods.

That’s to say because when the AirPods are connected to your device, they will become available as an audio output/input choice in Zoom.

Let’s begin with solving your issue with the steps below:

Solution #1 Connect AirPods Appropriately

Chances are you’re doing something wrong in the setup process. That’s why we will first-hand guide you through the instructions, so you make sure that you’re free of any mistakes.

Here’s to connect AirPods to Zoom:

  1. First, open the latch of your AirPods.
  2. Open the Bluetooth settings of the device you have opened Zoom on.
  3. On the back of your AirPods, hold the pairing button for 5 seconds.
  4. In the Bluetooth settings of your device, search for the AirPods’ connection.
  5. Tap on it once to pair.
  6. Once paired, open Zoom and access the audio settings.
  7. Head over to the Audio Devices tab.
  8. Once your AirPods are connected to the device that has Zoom opened, they will become available for an audio device option in Zoom settings.
Note: Make sure that by the time you open the Zoom audio settings, you’ve connected the AirPods to your device.

Solution #2 Disconnect AirPods From Other Devices

disconnect airpods

Once connecting your AirPods to a device, as long as they are saved in the Bluetooth settings they will automatically connect with the certain device.

This is because if you recently connected AirPods to another device in your household, they might connect without you knowing, and therefore you won’t be able to pair them with Zoom.

In that regard, make sure that you’ve disconnected the AirPods from all potentially suspected devices that they could have gotten paired to.

You can do that by accessing the Bluetooth settings on the given device and tapping “Forget this device”.

Note: The AirPods must remain out of the compartment while disconnecting them, cause otherwise, they will automatically disconnect.

Solution #3 Charge Your Headphones

It’s possible that your AirPods are running low on charge. Even though they might indicate activity with the pairing sound being played, you would have to charge them before usage.

In that regard, connect your AirPods to a lightning cable and let them charge for 1-2 hours. It may take a little less, or a little more for the AirPods to reach 100%, but make sure to wait until they are fully charged.

Headphones are well-known to give trouble over time when not being charged completely, especially if running low on battery.

Note: Make sure not to charge only the AirPods case, but with the headphones themselves.

Solution #4 Reinstall Zoom

reinstall zoom

If you’re using the Zoom application, it’s recommended to reinstall it.

Zoom is still under development and you can run into troubles, such as the one you’re currently experiencing with the AirPods.

Here are some universal steps to reinstall Zoom, regardless of the device:

  1. Open the storage unit on your device.
  2. Go to the programs folder, or the “Applications manager” on mobile.
  3. Locate the Zoom app and access the app settings.
  4. Choose “Uninstall” and wait.
  5. Download Zoom from the app store on your device.
Note: Once you’re done reinstalling, re-attempt the pairing by following the guidelines from solution #1.

Solution #5 Reset AirPods

reset airpods

If nothing worked from our solutions so far, what you should do is reset the AirPods to solve the problem.

This will disconnect the AirPods from all devices and cause them to restart, thus, rebooting their software completely.

Here’s how to reset your AirPods in easy steps:

  1. Connect your AirPods to the charger.
  2. Press the pairing button and hold it down for 15 seconds.
  3. Standby for 60 seconds until the reset is complete.
  4. Once the reset has concluded, you will want to re-pair the AirPods.
Note: You can make sure that the reset of your AirPods is done by taking a look at the LED inside of the charging case.

Why Won’t My AirPods Connect To Zoom On Mac?

airpod not working on zoom mac

If your AirPods don’t seem to be connecting to Zoom on your Mac, there are several suspects that you should inspect first.

Here’s how to fix your AirPods that won’t connect to the Zoom app on Mac:

1. Reboot your Mac

First reboot your Mac. You can do that from the power settings, by tapping on “Restart”. Attempt the AirPods-to-Zoom connection afterward.

2. Reset Network Settings

On your Mac, go to the Bluetooth settings and then access the network tab. Select “Reset Network Settings”, which includes Bluetooth as well. Test your AirPods with Zoom once done.

3. Check if Headphones are Already Connected

There’s a high chance that the AirPods are already connected to your Mac and this is the reason why you’re unable to connect them in the first place.

Thus, to fix AirPods that won’t connect to Zoom, make sure the device is charged and disconnected from any other devices. Next, attempt reinstalling Zoom on your device. Only then, you shall perform a factory reset on your AirPods to solve the issue.

Read Next: AirPods Not Connecting To Dell Laptop? (Fixed)

Bottom Line:

Now that you know why won’t my AirPods connect to Zoom, fix the problem with our solutions.

For additional information, you can always get in touch with Apple and they will provide you with suggestions or help you identify the cause of the problem.

Nicole B