Asking why is my Roku remote power button not working?
Well, we are happy to inform you that you have come to the right place.
Here we will discuss in detail every possible outcome of applying the steps we are about to share with you.
We can guarantee that the methods we will list in this post are proven to work, as they were taken into community discussion related to the same issue as yours.
Your Roku remote’s power button could be inactive due to several reasons. Aged batteries could cause malfunctioning and unwanted experiences.
Changing them regularly is required so you can avoid issues related to them.
If the batteries aren’t the issue, you can try power cycling your Roku device or restart the remote for which we will talk about in a few moments.
Before we start with our troubleshooting methods, let’s first take a look at why this issue appears.
Why Is My Roku Remote Power Button Not Working?
As we mentioned above, the power button is one of the most vulnerable parts of your Roku remote as it is one of the most frequently used buttons.
Here are some possible reasons why your Roku power button is not working:
- Worn-out batteries
- Dust within the button
- Inactive Roku device
- Blocked line of sight
- Broken button
Roku Remote Power Button Fix Methods!
Now, let us go through the best methods that we have gathered for you to fix the issue.
You can go one by one for best results!
Method #1 Re-Pair Your Roku Remote
An effective method would be to re-pair your remote with your Roku device.
It is well-known that Roku remotes tend to be the object of interference, so re-pairing resolves the issue.
The process involves some simple steps that we have listed below in a step-by-step tutorial.
Follow the steps in numerical to successfully disengage and re-pair your remote with the Roku device you are currently using.
- Open the Roku remote battery compartment and remove the batteries
- Unplug the power cable from your Roku device
- After 5 seconds plug it back in and launch Roku
- Pair your Roku remote using the Pairing Button
- Wait for 30 seconds so the connection could be established
In order to properly pair up your remote with the Roku device, you must hold the Pairing Button for up to 3 seconds until a light indicates that connection is being established.
If unfortunately, the light of the remote doesn’t blink, don’t get discouraged and try the same process again.
If your remote’s light doesn’t work, feel free to proceed with our next method that will help you properly replace your Roku remote’s batteries in order to fix the Roku remote power button that isn’t working.
Method #2 Replace Roku Remote Batteries
A frequent issue is an aged battery that could cause interruptions with your Roku remote’s power button or even sometimes stop it from working at all.
Before proceeding with our next methods, we recommend making sure that this problem is not the batteries’ fault.
Sometimes if the batteries are not new, you might still have issues with the remote so we recommend inserting a fresh pair.
Method #3 Power Cycle Your Remote
While you have batteries removed, you can perform a power cycle of your remote by pressing each button once.
We recommend pressing each button several times to ensure that you haven’t missed any.
Hopefully, a power cycle of your remote can restore your power button functionality.
Method #4 Power Cycle Roku
Another thing that could help you repair your Roku remote’s power button is the firm power cycle of your Roku device.
It is known that upon a cold boot, there is a great possibility that any malfunctions related to the Roku components can be resolved.
Here is how to properly perform a power cycle of your Roku device.
- Turn off your Roku device using the Settings
- Unplug the Power Cable from the corresponding power outlet
- Keep the device unplugged for 5 minutes
- Plug the Power Cable back in
- See if the issue Persists
In order for this method to take effect, make sure to wait 5 minutes before plugging your power cable back into the outlet.
This way your Roku device will let go of the current electricity and the next time is turned on, the boot will be fresh.
If power cycling doesn’t seem to resolve your issue, down below we have more methods for you to try and hopefully resolve your power button issue.
Method #5 Check If Roku’s Signal Is Blocked
Your power button could be malfunctioning because of a blocked direct path to your Roku device.
If the so-called IR (infrared) signal is blocked by a large obstacle and doesn’t directly reach your Roku device, the signal will be interrupted which eventually leads to the power button not working.
If moving the corresponding object isn’t a possibility, when interacting with your Roku device, make sure to lift the remote a little bit.
This way the signal will effectively reach its final destination and your Roku power button issue will be resolved.
It is important for your Roku device receiver to be wide open to your remote’s line of sight.
Method #6 Use Roku App as a Remote
An alternative method that doesn’t involve troubleshooting your physical remote is to yet, replace it with a digital one.
In order to achieve this, you must install the Roku app, designed by the manufacturers.
If you are using Android you will be able to get it using the Google Play app and if you are using iOS, via the App Store.
In order to properly pair your Roku app with your TV, follow the steps we have provided down below:
- Download & Install the Roku app on your smartphone device
- Open the app, and follow the provided on-screen instructions
- Then you must head to the Devices tab, and select your Roku device
- Next, click on the Remote icon and then you will be able to use it as a remote
Don’t worry if the Roku remote power button isn’t working, because, with this app, you will be able to power on/off your TV without using the manufacturer’s physical remote.
Roku Remote’s Power Button Isn’t Working Issue Still There…
In case none of the methods we have shared above doesn’t seem to resolve the issue, we have some alternative approaches you can try.
If your warranty is still intact and you haven’t harmed the remote in any way which could cause power button malfunctions, contacting the support team could be the best approach.
Before submitting your remote for repair, make sure to list all of the different methods you have tried in order to remove the issue.
This will significantly help the repair process and eventually get your power button fixed faster.
Replace Roku Remote
If you have tried everything, but your Roku remote’s power button is still not working, we have to inform you that changing it might be the best action in such situations.
There are many cheap universal remotes on the market that will definitely get the job done, but before purchasing make sure that it is compatible with your Roku device.
We hope that after this post, we eased up your experience dealing with the Roku remote power button not working and you could properly use your remote now.
After all, the power button could be broken, where repair is necessary.
For posts related to Roku, make sure to take a peek at our technical blog, specializing in resolving issues that might bother your Roku experience.
Read Next: Learn how to fix Roku not working Issue.
- Blink Live View Not Supported? – Complete Fix Guide - December 3, 2022
- Chefman Electric Kettle Won’t Turn On? – Fix Guide - December 3, 2022
- How to Fix Nanit Night Vision Not Working? – Complete Fix! - December 3, 2022