When your Philips TV HDMI not working, there are quite a few possibilities that you should take under consideration.
In general, HDMI issues could have a wide variety of causes. Everything from problematic third-party devices to faulty cables and inputs could represent a threat.
Luckily, there are many solutions to help you solve the problem in minutes!
To fix the non-working HDMI of your Philips TV, first, adjust the TV settings and perform an HDMI handshake of the cable. Next, make sure you’re choosing the correct TV source and test with different inputs. Lastly, you should use an alternative HDMI cable.
Let’s first figure out what could be preventing the HDMI from working correctly on your Philips TV and then proceed with the solutions.
Why Does The Philips TV Not Working HDMI?
The issue with the HDMI could be coming from 3 general places.
The first one is your Philips TV, then the hardware connection (HDMI cable itself), and the third-party devices connected to the TV.
Here are some of the potential issues that could be impacting your Philips TV’s HDMI:
1. Source Problem
Not choosing the correct source on your Philips TV may result in being unable to watch the broadcast of the HDMI.
2. Faulty HDMI Cable Unit
A hardware problem with the HDMI cable or its entries might result in your TV not identifying the connection.
3. TV Issues
A bug or glitch with the software of your Philips TV might also be the problem you’re facing.
4. Third-Party Device Problem
In case the cable is improperly connected to your third-party device, or the device itself is having issues, the HDMI might not work.
5. HDMI Input
A problematic HDMI input either on your third-party device or Philips TV might prevent you from seeing the broadcast.
Now that we’ve identified where the issue is coming from, let’s move on to several attempts that can manage to solve the problem for good.
How To Fix Philips TV HDMI Not Working?
We assume that you’ve already tried restarting your Philips TV.
In case you haven’t yet, we suggest rebooting your television to clear out any temporal glitches that might be bugging your device’s HDMI connection.
If a restart didn’t help, let’s proceed with checking the input source first:
Solution #1 Choose The Correct Source
The issue with HDMI might not be “working” if you’re not choosing the correct source on your Philips TV.
This is a casual mistake by users and can be solved by checking to which HDMI source your 3rd party device is connected.
Take a look at which of the three HDMI 1, HDMI2, or HDMI ARC your device is hooked up to.
Then your next move is to open the source menu on your Philips TV and select the source with the same input (label) as you’ve seen on the back of your device.
Note: To open the source menu on your Philips TV, you can press the “Source” button on your remote and choose from the corresponding inputs.
Solution #2 Hard Reset Philips TV
Unlike the normal reboot, a hard reset is going to power cycle your Philips TV and discharge the device, preventing any power-related issues.
Here’s how to perform a hard reset on your Philips TV:
- Shut down your Philips TV by pressing the power button on the remote.
- Wait for 5 minutes while your device is unplugged.
- Re-attach the power adapter after 5 minutes.
- Turn ON your Philips TV and test.
Tip: Avoid using any power strips to supply your Philips TV with power if possible.
Those types of electrical devices are well-known to develop issues that could impact your TV.
Solution #3 Try With A Different HDMI Input
Your Philips TV has more than one HDMI input you can connect cables to.
Additionally, you can take advantage of that in order to determine if the current input has developed some kind of fault.
Follow the steps below to learn all you have to do when changing the HDMI input:
- Disconnect the HDMI cable from your Philips TV.
- Locate a suitable input on the back of your Philips device.
- Connect the HDMI cable to the respective HDMI input you’ve chosen.
- Go to the source menu of your TV by pressing the “Source” button.
- Choose the new input and test.
Feel free to test with all of the HDMI inputs available to determine which one is the faulty one and which one would work.
Note: Don’t forget to choose the new source from the TV source menu.
Solution #4 Troubleshoot The Third-Party Device
As we’ve mentioned earlier, the problem you’re looking at might be with the third-party device you’re attempting to connect to your Philips TV.
We will run troubleshooting at the most major factors that are dependent on the HDMI functionality.
Here are some easy ways to troubleshoot the third-party device you’re connecting:
Hard Reset The Device
Hard reset the device by unplugging its power adapter for 5 minutes and connecting it after the time.
Remember to wait for 5 minutes or more, cause otherwise, the hard reset won’t be effective.
Connect The Device To Power
The current power source of the device might not be sufficient. Ensure the device is getting reliable electricity from the power source.
Reset The Device
Perform a factory reset on the corresponding device, based on its type and software.
Once you’re done, re-attempt the HDMI connection. Feel free to test with another HDMI device.
Tip: Remember to re-attempt the HDMI connection with your Philips TV after each of these troubleshooting suggestions.
Solution #5 Use An Alternative HDMI Cable
If nothing worked for you so far, we suggest replacing the HDMI cable you have connected to your Philips TV.
It would be pointless to keep troubleshooting if the cable itself has gone faulty so make sure to check that before you continue any further.
Since HDMI cables are relatively easy to acquire and there is nothing specific to each model, you should be able to get a replacement quickly. Once you have your new cable, put it in place and test the connection again.
Note: Make sure to mind the inputs and sources when installing the brand-new HDMI cable.
It is also recommended to use a unit purchased from a store and not second-hand.
Solution #6 Reset Your Philips TV
Performing a factory reset of your Philips TV might be your last option. In that regard, it’s recommended to scroll up and re-apply any solutions that you might have skipped.
Important: Ensure that the device’s power source is not compromised during the time of reset to avoid software damage.
To factory reset your Philips TV, go to MENU > SETTINGS > RESET AV SETTINGS > START NOW > OK > MENU.
This will initiate a reset on your Philips TV and shortly after the device should be ready.
Once the Philips TV OS has been cleanly installed, test the HDMI connection. You can use Solution #3 for reference.
Thus, to fix the HDMI of your Philips TV, first, perform a power cycle and ensure you’re choosing the correct input source. Additionally, you should use an alternative (proven to work) HDMI cable and troubleshoot the third-party device. If nothing helps, perform a factory reset on your Philips TV to solve the problem.
Read Next: Philips TV Screen Keeps Going Black?
After understanding why Philips TV HDMI not working, we hope you were able to solve the problem following our solutions.
The HDMI troubles are frequently met across the Philips TV community, and because of that, there are a bunch of troubleshooting workarounds you can undertake at home!
- Kwikset Smart Lock Code Change – FoolProof Guide - May 25, 2023
- How to Connect Turntable To Marshall Speaker? - May 25, 2023
- Asko Dishwasher Not Drying? – Complete Fix Guide - May 25, 2023