Magnavox TV won’t turn on and looking for a quick fix? This post is just for you!
Magnavox has great quality electronics, but like any electrical equipment, you can still get some problems with them.
Many customers can have issues when it comes to their Magnavox TV’s not turning on.
Today we are going to be getting to the bottom of the issue, and you will be able to learn all of the possible ways to turn on your Magnavox TV and ways to resolve any issues with it not working.
Strange anomalies may occur over the lifespan of your Magnavox television.
If your Magnavox TV won’t turn on, reboot your television to its factory settings, which will rectify the issue. If the problem remains, reset the power on your television and you will be able to solve the problem related to static accumulation in your television if any.
Let us learn how you can resolve the issue of why your Magnavox tv won’t turn on.
If you are unable to get your TV to turn on there are some possible causes. Below are some reasons why it may not be working:
- The TV is not plugged in properly.
- Faulty power supply.
- Tripped circuit breaker.
- Could be the result of the static build-up in your television
- Blown fuse in the power plug.
Before we look at methods of getting the Magnavox TV to turn on, however, let’s make sure we are following the proper procedure of switching the TV on.
How to Turn a Magnavox TV On?
Press the POWER button on the side of the TV to change the setting from OFF to STANDBY or ON.
The LED will switch either to red to represent STANDBY or green to signify ON once the POWER button is hit, depending on which mode the TV was in before being switched off using the TV POWER button.
A lost or destroyed tv remote is a typical reason for wanting to configure your Philips Magnavox TV in a new way.
If you’ve dropped the remote too many times or if the battery chamber is oxidized, it may become unworkable.
First, we need to begin with turning on your TV, to do this you will need to press the Power button.
On the TV’s control panel, you must press the Menu button. Following this, the location of the control panel can be found on the front of the television.
Using the Ch +/- and Vol+/- arrow buttons, navigate through the menus and pick specific things. Auto-program should be selected. Select Start now and then OK with the Vol+ arrow button.
Cable, Next, and then Start are the options. Wait until the screen displays a message indicating that the auto-programming is complete. The TV will switch back to the first channel remembered.
To program other options on your TV, use the Menu button on the TV control panel.
To move among the menus, press the Ch +/- and Vol+/- arrow buttons, and to choose an item, push the Vol+ arrow button.
To exit a menu, go to the Exit option and hit the Menu button on the TV control panel.
The very first thing you should do is restore your device’s factory settings.
This will restore it to its original factory settings. This will undo any changes you have made to the files and, in most cases, resolve the issue.
Depending on the model of TV you’re using, the procedure may vary significantly. As a result, it is recommended that you review the official manual that has been issued to you.
On your Magnavox television display console, press the Power button. Hold it in place for ten seconds. The screen will darken, and this is how you know it is powering off.
Please wait the full five seconds before continuing. Then proceed to turn on the television to see if the problem has been resolved or if it is still occurring for you.
If the problem is still very much persistent, unplug the television from the wall. You will need to allow at least five minutes to pass before trying the next step, otherwise, the troubleshooting might not work.
Reconnect your Magnavox television to the wall outlet to determine if the problem has been resolved.
To reset your TV to its default factory settings, follow these steps:
- To get to the Main Menu, press Menu on your remote.
- Press Enter after selecting TV Menu.
- Click on Reset to Standard then press Enter.
- To complete the reset, select OK.
If your Magnavox television does not turn on, it may not be connected to a power source properly or entirely. Check the TV’s connected to the power source to ensure that it is fully and correctly plugged in.
You will need to determine that it is stable and does not move. If it does, you’ll have to switch to a different outlet.
You can also use an adaptor on the plug to make the connection more secure, this will give the probability of the power source a higher chance of working well.
Note: When working with the power source, make sure to switch the electricity off before disconnecting and reconnecting the plugs to the power source.
If you’ve tried all of the above and your television still won’t switch on, it could be due to a malfunctioning power outlet.
Step #2. Try to plug the lamp into a different power socket if the light does not turn on when hooked into the television’s power source.
Step #3. If the power source is operational, the next step is to do a power reset. Unplug the set from the outlet to complete a power reset.
Then, for one minute, press and hold the power button. Release the power button, reconnect the TV to the socket, and turn it on.
Step #4. If the TV switches on, a power supply repair will very certainly be required in the coming days.
The solution for why your Magnavox tv troubleshooting won’t turn on is resetting the power on the television, resetting your Magnavox TV to its factory settings, checking that the TV is properly connected to a working power source, and following the correct procedure for turning on the TV itself.
Read Next: How to Make Mobile Hotspot Faster for PS4?
Now that you know why Magnavox tv won’t turn on following our guide, you shouldn’t have any trouble fixing the issue in the future.
Furthermore, if you are still having issues, please do reach out to the Magnavox dedicated customer support team for even more troubleshooting tips and tricks!
- Best Picture Settings For Vizio 4K TV? (Tested Settings) - January 21, 2022
- Why Amazon Fire Stick Keeps Optimizing? Fix Guide - January 21, 2022
- How To Connect Android Phone To Non Smart TV? Complete Guide - January 18, 2022