If you’re wondering about the process of how to reset Kasa Smart Switch, you’re just in the right guide!
Like you, many people aren’t so sure about this process.
In this guide, we’ll walk you through the steps on how to reset your Kasa Smart Switch, as well as give you information as to when a reset is recommended.
You can perform a soft reset of the Kasa switch by pressing and holding reset for five (5) seconds or until the LED indicator blinks amber and green. For a factory reset, however, press and hold the reset button until the LED indicator blinks amber rapidly (or about 10 seconds).
To understand the process of resetting the Kasa Smart Switch plug better, it’s imperative to know and be aware of the reasons why performing the reset is necessary.
Resetting your Kasa Smart Switch plug is an important process because it’s known to have solved a lot of problems and issues with the device.
Moreover, these devices have been engineered to be done with ease!
But, there are quite a few situations that make resetting your Kasa Smart Switch a necessity.
These reasons are:
- When the device is not successfully connecting to WiFi
- If the switch could not be controlled manually
- After experiencing a power outage
- When the device keeps on dropping from the network
- You’re installing/replacing a switch
Out of all these reasons, many people are perplexed about the process of how to reset Kasa Smart Switch after a power outage.
Don’t worry because it’s actually not that complex! Doing this process will never be too complicated!
Furthermore, you are in luck, because our guide will give you the complete guided steps of how you can do it!
How to Reset Kasa Smart Switch? Complete Steps
In this guide, we’ll be walking you through the steps of how you can perform a soft reset and a complete factory reset of your switch.
Not only that, but you’ll also learn what the differences are and when you should do which!
In electronics, there’s usually what we call a soft reset. A soft reset is the type of reset used to do a simple power cycle or a reboot of the device.
Doing so wouldn’t change or tamper with the current configuration settings you have on the device.
Here’s how you can perform a soft reset on your Kasa Smart Switch:
The first thing you want to do is to try and locate the reset button on your switch. This is the part of the switch that’ll trigger the reset.
It wouldn’t have a label with a reset on it. You’ll usually find this tiny button beneath the main switch.
When you’re done finding it, you next want to press and hold it for about five (5) seconds.
Pressing and holding it for this particular timeframe will trigger the soft reset.
NOTE: Pressing it longer could trigger the factory reset instead of the soft reset.
While you’re holding it, you’ll notice that the LED indicator will blink amber, and then green. That’s the sign that the soft reset has successfully taken place.
After this reboot process, your Kasa Smart Switch shall be refreshed with everything. This includes the networks it was previously connected to.
NOTE: A soft reset wouldn’t reset the configurations and saved settings on the switch. It might prompt you to re-pair it with the app, but that’s all there is.
On the other hand, a factory reset, as most of us know, is a much different process.
Factory resets are done usually as the last resort in case the device is not functioning properly even after all troubleshooting steps have been exhausted.
So, for your Kasa Smart Switch, here’s how you perform a factory reset of it.
Akin to soft resetting, you first need to find the reset button on the switch. Most Kasa Smart Switch models would have it underneath the main switch.
But, there are models where they have it on top of the main switch or just beside it.
Then, the next thing you want to do is to press and hold it. When you do, though, you need to hold it for about ten (10) to fifteen (15) seconds.
Keep it held until you see the LED indicator blinking amber rapidly. When you see this, it’s a sign that the device is being factory reset.
Wait for a few seconds until you see the LED indicator calm down.
The rapid amber-light blinking should last anywhere between five or three (3) to five (5) seconds.
It should now be at a stagnant amber color, signifying that it’s not yet configured.
This brings us to our next step, which is…
Last, but most definitely not least is to reconfigure the Kasa Smart Switch to the app.
Here’s the process of reconfiguration:
- Open your Kasa App and delete the switch.
- Then, force close and reopen the Kasa App.
- Select Add Device > Kasa Smart Plug from the options there.
- Follow the guided instructions on the further steps you need to do.
NOTE: Factory resetting your switch erases all the saved data/information on the device. This includes saved connections/networks, SSIDs, device names, etc.
Once you’re done with the troubleshooting procedure we detailed above, you should now know the correct process of how you can reset your Kasa Smart Switch.
In the future, if you find that your switch needs a reset, you can go back to this guide for all the information you need to know about it.
Were you not able to reset it even after you’ve followed the guided steps we listed above?
Or were you able to reset it but the smart switch is still acting strangely?
If yes, the best course of action to take is to contact TP-Link and tell them about what you are experiencing.
Your device could be the problem; they’re the experts, so they should be the ones to help you with it.
Reach out to them and let them know about what the problem is as well as the steps you’ve done to try and reset it.
To reset your Kasa Smart Switch, all you have to do is press and hold the reset button. Press and hold it for five (5) seconds for a soft reset, and for about ten (10) seconds for a factory reset. Contact TP-Link’s technical support team if problems persist.
If you’re unable to find a guide that’ll give you detailed ways of how to reset your Kasa Smart Switch, don’t worry, this guide has it all in store for you!
Knowing and understanding the method of resetting your Kasa Smart Switch is relevant because it’s the first line of troubleshooting you need to do in case it malfunctions.