How To Fix Kitchenaid Mixer Loose Head? – Easy Steps

Wondering how to fix Kitchenaid mixer loose head? Be with us to find out the correct way!

Kitchenaid mixers are known for their reliability and effective performance. But just like any other appliance, the mixer needs maintenance to carry on working well.

However, it frequently causes problems, especially if the mixer head is loose so keep reading to discover the solution!

A Kitchenaid mixer with an unadjusted head may jerk or wobble, and if it isn’t adjusted within time, additional damage can occur to the machine. Therefore, it is important to adjust the mixer head properly but the solution sometimes requires a couple of minutes.

Let’s now move on further to find out more about the Kitchenaid mixer loose head!

How To Know If Kitchenaid Mixer Head Is Loose?

Before moving to disassemble any of the appliances, it is crucial to first ensure that the problem is actually related to a loose head.

This is why we’ve prepared some preparation steps to help you out with the mixer’s diagnostics first.

Here are some signs that straightforwardly suggest a loose head:

• When you use a mixer to mix anything in the bowl, you’ll notice that some ingredients cannot be distributed evenly in the mixture, instead, they are left in the bottom
• You’ll notice too many scrape marks on the bottom of the bowl, which indicates the head is too down and needs to be adjusted
• While the mixer is running, you notice that the beater will chip on the bowl bottom or have difficulty rotating due to an unadjusted mixer head
• The head of the mixer will not touch the mixture means the head is too high

Next, let’s learn how you will fix the mixer head if you have determined that there is an issue!

How To Fix Kitchenaid Mixer Loose Head?

You need to move on from the Dime Test in order to correctly adjust the loose head on your Kitchenaid mixer.

It is worthwhile to fix the loosehead, but first, make sure to follow each step properly as described.

Let’s begin!

Step #1 Unplug The Mixer From The Power

Before disassembling or fixing the appliances, it is important that they are unplugged.

Because of this, you must first be sure to unplug the mixer from the outlet and set it down somewhere. 

Tip: Select an open area so that you may easily adjust the head.

Step #2 Tilt The Mixer Head To Up

You need to tighten any loose screws in your mixer’s head in order to set the proper spacing between the beater and bowl.

There are two black screws at the sides of the head, but you don’t need to remove them because they aren’t associated with the head issue in any way. 

Simply tilting the Kitchenaid stand mixer loose head will reveal the real screw that supports head adjustment.

Step #3 Acquire Flat Head Screw

Locate the flat head screw in the mixer’s neck head after tilting up the mixer’s head.

You will probably see that the screw is loose and improperly grounded to the location.

With the use of this screw, the mixer head may be adjusted by lowering or raising it in accordance with the spacing between the bowls. 

You simply need to adjust the screw to tighten the loose head of your mixer!

Step #4 Place The Coin In The Bowl

To determine if the head of your mixer is too down or high, you must first place a coin in the bowl before making any adjustments.

This makes it simple to adjust the head to the appropriate inch.

Step #5 Turn On The Mixer

Once the coin has been placed, turn on the mixer at a low speed and carefully observe.

If the mixer head is shaking or moving the mixer dime around a bit, this means that the head of your mixer is too high and has to be adjusted with a flathead screw.

Step #6 Turn The Screw Counterclockwise

By following the above method, if you notice that the head is high.

hen you need to turn the flathead screw of the mixer neck to a quarter counterclockwise by tilting the head up to raise the mixer head. 

When you’re ready, you need to test the mixer to check whether or not the head is adjusted.

Step #7 Test The Mixer Again

Turn on the mixer by tilting the head down and plug it into the power outlet.

Pay close attention to whether the dime is moving at the blade appropriately or not. If it is moving properly then the head is properly adjusted. 

In case the dime is not moving at the blade, then you have adjusted the head of the mixer too high and that’s why it’s not properly working. 

Step #8 Turn The Screw To Clockwise

Next, you need to just adjust the head of the mixer by a quarter turning the flat head screw clockwise but make sure to not turn it too much.

By doing this, the mixer’s head will lower down to the proper height. But to ensure you need to run a mixer for testing it first.

Step #9 Turn On The Mixer

Once the head of the mixer has been lowered, you’ll need to test it!

Simply turn the Kitchenaid mixer on to see if it is at the correct height by monitoring the beater, which should move approximately one inch with each rotation.

However, if you fail to notice something like that you’ve got one option left.

You only need to yet again adjust the flathead screw by rotating it either clockwise or counterclockwise to set it to the right height.

Note: It is important to have the sixteenth inch of clearance for proper mixing performance! 

How To Tighten Kitchenaid Mixer Head?

If your mixer head is loose then it cannot properly mix the mixture in the bowl due to incorrect adjustment of beater height.

You just need to tighten the head but before doing any repair on the appliance plug it out from the outlet. 

1. Tilt the Kitchenaid mixer head up.
2. Turn the flathead screw to quarter counterclockwise to raise the head.
3. Then turn the beater on to check whether the mixer is moving properly at the blade.
4. If it isn’t mixing, you may have raised the head too high. 
5. If so, simply turn the screw yet again in a quarter-clockwise motion to lower the head.

If there is any more difficulty, be careful to adjust it until it is correctly set at the appropriate height to bowl.

When you’re done, the Kitchenaid mixer should function normally and the head should no longer be loose and wobble around. 

Frequently Asked Question!

Here are the answers to some of the most frequently asked questions!

Why Is My Kitchenaid Mixer Head Bouncing?

Usually, a loose head screw causes the beater to hang too low, which causes the mixer head to bounce when it comes into contact with the bowl.

You may quickly and effortlessly fix the bouncing issue with your mixer head by simply adjusting the head screw.

How Do I Fix My Kitchenaid Mixer Loose Head?

Your Kitchenaid mixer’s loose head may be quickly fixed by tilting the head of the appliance.

If you want to lower or raise the mixer head, turn the flathead screw of the head a quarter turn either clockwise or counterclockwise. 

Quick Recap:

If you don’t know how to fix Kitchenaid mixer loose head, then it is very simple. Simply tilt the mixer head and turn the flathead screw in either a clockwise or counterclockwise direction to appropriately adjust the head by using the dime testing approach.

Visit our blog for more Kitchenaid appliances helpful troubleshooting guides!