Honeywell Humidifier Orange Light? – (07 Quick Solutions!)

Honeywell humidifier orange light can be difficult to understand, as you see just some warning light appear with little context.

If you see a blinking or glowing Honeywell amber or red light, don’t worry; we have you covered with solutions.

To fix your Honeywell humidifier, first start by checking the water tank for issues and thoroughly clean it. Next, ensure your power outlet and delivery are in order.

Now that you have the basic steps we will attempt let’s check out what causes the orange light before we try some fixes.

Why Does My Honeywell Humidifier Have an Orange Light?

If you see that your Honeywell humidifier has an orange glowing light or a red/amber light, it most likely indicates an issue with the water delivery or levels.

In rare cases, this issue can be due to a software or electrical malfunction.

Here is a brief overview of the most common causes for Honeywell humidifier orange light:

Now that you know the top most common causes for Honeywell humidifiers having an orange light, let’s see the solutions.

How to Fix Honeywell Humidifier Orange Light?

Tip: Your Honeywell device should always stand upright, without any tilt on an even surface.

Step #1: Check the Honeywell Water Tank for Issues

If your water tank has any damage or issues, it might not fit correctly into your Honeywell device.

When this happens, the amber warning light for water level might trigger due to the water tank issues.

Here is how to check your Honeywell water tank for any issues:

1. Ensure that your Honeywell humidifier is unplugged from the power source.
2. Carefully remove the water tank and drain it somewhere, then inspect the reservoir for any cracks or damage (also pay attention to warping around the base). 
3. If you notice your tank is damaged, order a suitable replacement for your Honeywell model.
4. Fill the water tank with clean water, making sure not to overfill it.
5. Look at the top of the water reservoir and check the tank cap to ensure it’s properly sealed.
6. Reinstall the water tank back into the humidifier carefully and plug the humidifier back into the power outlet.

After these steps, turn on your humidifier and observe if the orange light turns off.

Note: Pay attention that the water tank fully snaps or locks into place, indicating it is fully seated.

Step #2: Clean the Humidifier Water Tank And Intake

Whenever the Honeywell humidifier light turns orange, one of the most common causes is because there is mineralization buildup.

This happens as water goes through your humidifier and obstructs it – causing an amber warning light for insufficient water level to appear.

Here are the proper steps to ensure your Honeywell humidifier is clean:

1. Unplug the Honeywell humidifier from the power source for safety.
2. Remove the water tank and empty any remaining water.
3. Meticulously clean the tank and the base with a vinegar and water mixture in a ratio of 1:1.
4. When cleaning the Honeywell humidifier base, don’t soak it; instead, just brush it with a damp towel or sponge dipped into pure white vinegar.
5. When done cleaning, rinse all parts thoroughly to remove any vinegar smell or residue.
6. Dry all components completely, then reassemble the humidifier and refill the water tank.
7. Plug in and turn on the humidifier to check if the orange light still appears to blink or glow.

Note: Honeywell humidifiers that produce a mist in a white color indicate you should clean the mist exhaust port.

Step #3: Replace the Honeywell Filter

If you have so far properly cleaned and serviced your Honeywell device, yet the amber light still glows, it’s likely because your filter is too congested or dirty.

To remedy this cause, you must replace the old filter if it’s too depleted.

Remember that the steps below can vary based on your exact humidifier device model and type.

Here is how to replace your Honeywell humidifier filter to clear an orange light alert:

1. Disconnect the Honeywell humidifier from the power supply.
2. Access the filter compartment and remove the old filter.
3. Purchase a compatible replacement filter for your specific model – be careful not to mix up the different namings, as they could be similar.
4. Install the new filter in place of the old one, ensuring it “clicks” firmly in place – if unsure, check your Honeywell instruction manual.
5. Reassemble any parts you had to remove during the filter change.
6. Reconnect the humidifier to the power source and test your Honeywell device to see if the orange light issue is fixed.

Note: Carbon or HEPA filters should never be washed and only replaced when not efficient.

Step #4: Checking Electrical Connections and Power

A common yet frequently overlooked cause of an orange or amber light glowing in your Honeywell device is due to power issues.

If your device is receiving irregular power, this can raise a false amber light alert.

Here is how to verify your power supply is for the Honeywell device:

1. Unplug the Honeywell humidifier from its electrical outlet.
2. Look over the power cord thoroughly for any signs of fraying, cuts, or other damages.
3. Ensure that the plug is not loose in the outlet.
4. Make sure the plug fits securely in the outlet, and test the outlet with another device to ensure it’s functioning correctly.
5. Reconnect the humidifier to a known working outlet.
6. Keep an eye on your Honeywell humidifier to confirm the orange light doesn’t reappear.

Note: If your Honeywell was bought outside the US, it needs a power adapter to function properly.

Step #5: Humidity Level Adjustment

A too-high humidity level can cause some more modern Honeywell humidifiers to stop working to prevent health hazards due to excessive moisture.

To make certain this does not cause an amber light, you have to manually check the humidity settings.

Here is how to properly measure and adjust your ambient room humidity levels:

1. Turn off and unplug the Honeywell humidifier.
2. Locate the control knob (usually a circular design that rotates) or button for humidity settings on your unit.
3. Slowly adjust the humidity setting in small increments to a lower level to see if it affects the orange light.
4. Wait for a few minutes to let the humidifier adjust to the new setting.
5. Reconnect the power and turn on the humidifier.
6. Monitor the humidifier to see if the orange light goes off.

Note: To prevent false readings, use a soft, dry cloth to clean any dust or residue from the sensors.

Step #6: Reset Your Honeywell Humidifier

If you have checked all past steps, yet your orange light still glows, it’s likely due to a software error and not due to hardware issues.

Performing a power cycle is a great way to eliminate many potential software glitches for your Honeywell device.

Here is how to properly reset your Honeywell humidifier:

1. Turn off and unplug your Honeywell humidifier before you initiate a reset.
2. Wait for the humidifier to remain unplugged for about 30 seconds to a minute.
3. Press and hold any reset buttons if available on your model.
4. Reconnect the humidifier to the power source.
5. Turn on the humidifier and check if the orange light is still on.

If your Honeywell device has a dedicated reset button or pinhole, press and hold it for about 12-25 seconds.

Step #7: Check Your Room Temperature

In some cases, the room conditions can affect your Honeywell humidifier, and if too extreme temperatures are present, your device could stop working. 

Here are some general guidelines on ensuring your Honeywell is placed in an optimal environment:

1. Turn off the Honeywell device and unplug it.
2. Ensure the room temperature where your device is placed is not too cold or overly hot.
3. Relocate the humidifier to a warmer area if necessary, or try temporarily placing it in a different room.
4. Clean any vents or airways to ensure proper airflow – never place covers on top of exhaust ports, as this can cause overheating issues.
5. Plug in the humidifier in the new location to a working power source.
6. Turn on your Honeywell humidifier and check the orange light status.

Note: Don't place your humidifier in an area with open windows, as it will diminish its effectiveness.

Quick Recap

Honeywell humidifier orange light can usually be fixed by checking your water level, maintaining the water tank, and ensuring proper power delivery.

In rare cases, a reset is warranted.