Bose SoundLink Color 2 Not Charging? Complete Fix Guide

So, the Bose SoundLink Color 2 not charging and you’re looking for a complete fix guide?

You’re definitely at the right place!

This problem persists throughout the community and users find it difficult to determine what’s the origin of the issue.

In this guide, we’ve collected the most truthful information and we will share it with you so you can fix the issue easily!

To fix the Bose SoundLink Color 2 that won’t charge, wake it up from the battery-saving mode. Next, test out with a different USB cable and a power adapter. Clean any dust within the battery compartment and replace the battery unit inside.

Why Is The Bose SoundLink Charger Not Working?

If the charger for the Bose SoundLink Color 2 seems to be nonfunctional, the problem is either with the charger itself or your Bose speaker.

There are plenty of problems that can occur, which will actively suppress your charger from charging the product.

That’s why we’ve extracted the most frequently reported causes at your disposal:

1. Bose Is In Battery Protection Mode

When untouched for too long, Bose will enter a battery protection mode, which will completely shut down the device’s battery.

2. Problem with USB Cable

An issue with the USB cable could have occurred, preventing the product from receiving a charge.

3. An Issue With the Adapter

The adapter that the USB cable connects to, might be insufficient or has worn out and needs replacement.

4. Dusty Battery Compartment

Not cleaning your product for too long may result in its inability to charge.

5. Problem With The Power Source

Even if it’s unlikely, it’s possible that your power has gone faulty after a power surge or a simple outage.

This is what you had to know about the problems that are occurring with your Bose product. To fix the issue, keep reading our proven solutions.

How To Fix Bose SoundLink Color 2 Not Charging?

After taking a quick look at the issuer’s reported causes, it’s time for you to solve the problem.

The solutions we’ve separated in our guide must be followed consecutively for you to achieve success at the troubleshooting.

Tip: Make sure to test your product after each of the solutions you attempt.

Solution #1 Disable Battery Protection Mode

When not used for a long interval of time, the Bose SoundLink Color 2 tends to “fall asleep”.

That’s an unusual state of the speaker, which only occurs if you left the device untouched for days or weeks.

This mode activates for the sake of preserving the battery’s life whenever the speaker is not in active use.

Quite frankly, the speaker won’t accept any charge until it is woken up with a specific button sequence.

How To Disable Battery Protection Mode?

To release your speaker from battery protection mode, keep pressing the power button while the device is plugged into an electrical outlet.

Chances are high that the battery of your speaker had run out during the protection mode and you can wake it up by tapping the power button.

Note: You will understand that your speaker has come out of battery protection mode whenever the LED blinks once.

Solution #2 Power Cycle Bose SoundLink Color 2

If your product doesn’t seem to be in battery protection mode and still refuses to charge, there’s a clever approach to fight this issue off.

That is through the power cycle sequence which will practically normalize the power flow within the speaker and fix any power bugs along the way.

Here’s how to power cycle the Bose SoundLink Color 2:

1. Grab the supplied 2,5mm screwdriver with your product.
2. Undo the 2 screws on the back of the speaker.
3. Take the back cover away from the speaker.
4. Expose the batteries inside of the device.
5. With a gentle grab, take the battery out.
6. Standby for 5 minutes until the speaker gets discharged.
7. Re-attach the battery and install the cover.
8. Test.

Note: As you reinsert the battery back inside of your speaker, watch out for the polarity.

Solution #3 Use Different USB Cable/Power Adapter

If the Bose SoundLink Color 2 refuses to charge, the suspicion falls directly on the charging equipment itself.

Although you’re supplied with a fully functional USB cable from Bose meant for charging, it could have gone faulty over time.

Let’s test out replacing the USB cable first.

How To Replace Bose Soundlink’s USB Cable?

1. Grab ahold of the charging USB cable for your Bose.
2. Disconnect it from the adapter.
3. Take a replacement USB and insert it into the adapter.
4. Connect the other end to your Bose speaker.
5. Test the charging.

How To Replace Bose Soundlink’s Adapter?

1. Disconnect the adapter from the USB cable.
2. Grab a new adapter for a test.
3. Connect the other USB cable to the adapter.
4. Plug the adapter into the outlet
5. Test your Bose’s charging.

Note: It’s important to test both after replacing the USB cable and the charging adapter.

Solution #4 Plug Into Different Power Source

Users suspect the problem to be with their power source, but if there is no electricity in the outlet, your speaker won’t charge at all.

That’s why the next thing you should attempt is to connect your Bose to a different power source. For additional security, use an outlet that you’re certain is working.

If you had another device before connecting the Bose speaker and the previous device had sufficient electricity, it will justify that the outlet is functional.

Knowing this, disconnect your Bose from the charging equipment and relocate the adapter to an alternative power source.

Plug your Bose SoundLink and check if the charging issue has now been fixed.

Solution #5 Replace Battery Inside Bose

If the Bose SoundLink Color 2 is still unable to receive a charge, we have one last suggestion for you.

That is to replace the entire battery unit inside of your device to fix the issue.

Sometimes the battery reaches an end-life and no matter what you do, you’re not able to fix the charging of the speaker.

Here’s how to replace the battery inside of the Bose SoundLink Color 2:

1. Remove the back panel from the Bose SoundLink, using the supplied screwdriver.
2. Grasp the battery unit along with the battery station.
3. Pull the entire battery equipment away from the earcup.
4. Alight the new battery your Bose uses (AAA) and re-insert the equipment.
5. Install the back cover of your Bose.
6. Test.

Note: Press the power button 3-5 times after reinserting the battery to start the Bose SoundLink Color 2.

Thus, to fix a Bose SoundLink Color 2 that refuses to receive a charge, wake up the device and perform a power cycle. Next, replace the USB cable and the power adapter. Plug the device into an alternative power source and if nothing worked, replace the battery.

Read Next: How To Fix Bose SoundLink Mic Not Working?

Bottom Line:

Now that we’ve enveloped the Bose SoundLink Color 2 not charging case, use our solutions to dispose of the issue once and for all.

We will additionally suggest replacing the battery of your Bose SoundLink Color 2 every once in a while to keep the device from running into similar issues!