How To Fix Blink Mini Camera Green Light Flashing?

Wondering why Blink Mini camera green light flashing? It’s simple!

As long as the Blink Mini camera has a solid green light, it means that the device is functioning just normally and it’s connected to the local internet.

However, when the green light starts flashing, the indicator shows that something went wrong with the camera’s connection.

To fix the green blinking light on your Blink Mini camera users need to Power Cycle the device and re-add the camera to the mobile app. The next step is to check for Blink outages and if there aren’t any, reinstall the app and reset the Blink Mini camera.

Let’s next unwrap the green blinking light on your Blink Mini camera in detail:

Why Is My Blink Mini Flashing Green?

The green light on your Blink Mini camera should always be solid green, which is the prime indication of a normal device operation.

When the green light starts to blink, this is an indication that something with the camera’s connection went wrong!

The green light on the Blink Mini camera mainly represents an internet connection issue!

Here’s everything that could cause the Blink Mini camera to blink green light:

• Software Camera Issue
• Blink Server Outage
• An issue with the Network Modem
• Slow Internet Speed
• Blink Application Problem

These are the reasons causing the flashing green light on your Blink Mini camera.

In order to solve the problem we’re going to undertake a complete solution guide so let’s jump right in!

How To Fix The Blink Mini Camera Green Light Flashing?

The solution to the blinking green light on the Blink Mini camera revolves around inspecting each aspect, surrounding the internet connection.

In addition, we’ve included a bunch of other minor issues that we’ll be solving in order to check everything.

Let’s jump into the first solution!

Solution #1 Power Cycle Blink Mini

The very first step against the blinking green light on the Blink Mini camera is the Power Cycle!

This is an easy, yet powerful solution and only requires users to disconnect their Blink Mini cameras from the power for 30 seconds.

It’s important to cut the power supply and not only turn off the camera so the device can cool down and refresh ALL connectivity services.

Tip: Keeping the camera disconnected for longer works better!

Solution #2 Re-Add Blink Mini to App

Now that the camera has been properly discharged and restarted, we’re ready to re-add the device to the mobile app.

Sometimes when the camera loses connection to the app, the internet won’t be able to reach the device, therefore the green light will be blinking.

Follow the steps below to re-add the Blink Mini camera to the Blink App:

1. Open the Blink Application.
2. From the Home Screen, tap the “+” Add Device.
3. Select Mini Camera from the device’s list.
4. From there Scan the QR code on your camera.
5. The Blink Mini camera will now be recognized.

If you want to add the Blink Mini camera to a new system installation simply tap on Create a New System and give it a name.

Otherwise, just select an already existing Blink system.

In case the Blink Mini green light is still flashing, continue with the next solution!

Solution #3 Check For Blink Outage

As we know, the Blink Mini camera’s connectivity to the internet is mainly dependent on the mobile application.

When there is an ongoing outage/maintenance with the app, it’s highly likely for your Blink Mini camera to flash in green for the time being.

There is no official tool that allows users to check for planned and unplanned outages, except for their social media.

Any outtakes will be reported on Blink’s Official Twitter Page.

In case there is an ongoing outage you will only need to wait for a few hours until the issue is sorted out.

With a bit of luck, the maintenance ETA will be reported on their social media.

In case the application is online, but your Blink Mini camera is offline, continue reading!

Solution #4 Restart Network Modem

It’s time to shift our attention toward the internet used to supply the Blink Mini camera.

Even when your mobile device appears to be connected to WiFi, your internet might still be bad.

What this essentially means is, having WiFi is one thing, but having internet on this WiFi is entirely different.

It all depends on whether you receive packets from the DNS server and whether your network router/modem is functioning well.

Solution: Unplug your network router/modem from the power for at least 3 minutes!

This will allow your network device to discharge, cool down and restart.

In most cases, internet issues are solved by restarting the network modem, so proceed further only if you already did.

Solution #5 Test Network Speed

Did you know that Blink is not compatible with 5Ghz WiFi frequency?

Well, if you’re attempting to connect the mobile device and camera to a 5Ghz broadband of your router, the green light won’t stop flashing.

In that regard, quickly switch to the 2.4Ghz WiFi of your network and use Solution #2 to re-add the camera to the app.

In case you’re concerned that your internet is slow and that’s why the green light is blinking, take a Free Internet Speed Test.

Anything below 3Mbps is considered not fast enough!

Note: In case your home internet is not what’s causing the issue, proceed further in the guide!

Solution #6 Reinstall the Blink App

The next solution in the line is to perform a clean installation on the Blink application!

There is no point in deleting corrupted data separately when we can just Uninstall the Blink app and later download it back from the app store.

Simply follow the steps below:

1. Reach into your device’s Settings.
2. Tap on Apps/Storage to reveal ALL apps.
3. Select the Blink Application > Uninstall.
4. For iOS open the App Store.
5. For Android go to Google Play Store.
6. Type “Blink” in the search field.
7. Download the Blink application.
8. Open the app and sign in to your Blink Account.

When you’re ready it’s recommended to remove the Blink Mini camera from the devices and use the steps from Solution #2 to correctly re-add the device.

In case that doesn’t help and your camera is still blinking in green it’s time to use the most powerful solution next!

Solution #7 Reset Blink Mini Camera

The final solution should always be performing a Factory Reset on the Blink Mini camera!

This method will erase ALL camera settings and remove the device from the mobile application, which proves users with a fresh start.

Perhaps something went wrong during the setup, which made the green light flash, so this is the best way to solve the issue!

Here’s how to factory reset the Blink Mini camera in easy steps:

1. Locate the Reset button on the Blink Mini camera.
2. Press and hold the Reset button for 30 seconds.
3. The Blink Mini camera will reset to default settings.
4. When the Solid Green + Blinking Blue paper, tap on Discover Device.
5. Join the 2.4Ghz WiFi of your router.
6. Follow Solution #2 to re-add the camera to the app.

When the camera has been completely reset and re-added to the app, the blinking green light should no longer be there.

In case the issue is persistent, you’ll need some professional help!

Why Not Contact Blink Support?

When the Blink Mini camera flashing green light continuously, and it’s not your internet causing the issue, it’s time to seek help.

Simply call 781-332-5465 or navigate to the Blink Contact Us Page to report the problem you’re experiencing.

They will surely help!

Tip: Don’t forget to share what you’ve already tried in this guide!

That was everything you can do at home so let’s recap what we’ve learned so far!

Quick Recap:

Thus, the blinking green light on the Blink Mini camera occurs due to poor internet or when the app servers are currently offline. The solution involves inspecting everything on our side and in case nothing helps, resetting the Blink Mini camera to default settings.

Wrapping Up:

Now that we’ve learned why Blink Mini camera green light flashing and the best solution to fix the issue in minutes, we’re ready to stop bothering.

In case you’ve missed something from the guide above, we strongly recommend scrolling up and filling in.