If your Xbox One won’t turn on after power outage, there are quite a few components that could have been impacted.
If your Xbox One seems to be struggling to start after a power outage, the issue is most likely with the device’s internal supply.
There’s also a chance that components included in the power supply have gone faulty as well so we’ll inspect them all to determine.
To fix your Xbox One that doesn’t turn on after a power outage, first reset your internal supply and reconnect the power adapter. Perform a power reset on your Xbox One and attempt to boot the device in safe mode. Lastly, plug the console into an alternative power outlet to see if that will help.
Let’s review what is causing the issue with your Xbox One after the power outage has taken place before jumping into the solutions.
A variety of devices could experience issues after a sudden power outage.
Luckily, users have identified what exactly could go wrong with Xbox One if it refuses to start up after a power outage and here we’ll learn everything.
Here is what might have happened to your Xbox One:
1. Power Components Issue
One of the most frequent occasions for issues with Xbox after power outages are roasted power components.
2. Power Source Problem
The power source that your Xbox One is attached to could have gone faulty, therefore cutting the electricity supply to your device.
3. Power Circulation Problem
As you probably know, a power outage may discharge your Xbox One out of any electricity and you will have to power cycle the device.
4. Software Problem
There could be a temporary software bug or glitch with your Xbox, preventing it from booting normally and you will have to use the safe mode.
5. Burnt Console
Lastly, even if it’s really rare for your Xbox to go faulty after a power outage, it’s not excluded, since there could have been a short-circuit or electric surge.
Those were all of the possible problems that could be occurring with your Xbox One console.
We will put the hardware failure possibility aside and check what we can do to solve the issue.
How To Fix Xbox One Won’t Turn On After Power Outage?
The methods we’ve prepared to troubleshoot your Xbox One console are designed to consecutively identify and solve issues with the device.
Make sure to apply our methods in the order for the best effects.
Tip: Make sure to test your console after each of the following methods to determine if the issue has been solved.
The first thing that you can try is a reboot called “soft reset”.
This process, unlike the hard reset, works with the power button of the console and identifies whether the issue is with the power supply or the Xbox One itself.
For the soft reset, you will only need the Xbox controller and clear access to the power button on the console.
Here’s how to soft reset your Xbox One product in easy steps:
- Go over to the console.
- Grab your controller.
- Press the Xbox button on the controller.
- Hold the controller’s button for 10 seconds.
- Regardless of whether you hear or not hear a beep, go over to the console.
- Press the power button on the console for 5 seconds.
It doesn’t matter whether your console beeps or not once turned on with the controller.
By using the controller, you will identify whether the console is receiving power in the first place and if it can be started.
Note: You can track the Xbox One’s power supply throughout the entire guide by looking at the LED on the power brick.
If a soft reset didn’t seem to help, you shall attempt a hard reset.
The major difference between the soft and hard reset is that in the hard reset, you have interaction with the power components of the console, thus, the power adapter and brick.
Here’s how to hard reset your Xbox One console easily:
- Go over to the Xbox One.
- Press the power button again, for 5 seconds.
- Disconnect the power adapter from the source.
- Detach the power brick from the adapter.
- Standby for 5 minutes with all components disconnected from one another.
- Reconnect all cables and attempt turning on your console.
Note: Make sure that all cables are attached to their respective outlets/bricks/cables once the hard reset is complete.
If the power outage caused some sort of software issues with your Xbox, the safe mode boot is your way to go.
By booting the console in safe mode, you will avoid starting the entire software, instead, it will only start the most necessary services for the OS.
To start your Xbox One console in safe mode, simply hold the Xbox and Eject button simultaneously for a period of 10 seconds.
Once the time has expired, keep holding on to the button until your screen flashes twice.
Only after the 2nd flash, you shall release the button. Once booted in safe mode, choose “Repair Software” from the options in the available list and wait.
Make sure not to unplug your Xbox One for the time being to avoid additional issues.
Note: The software repair may take a while, based on what has gone wrong with the firmware of your console.
If booting in safe mode and repairing the software of your Xbox One didn’t seem to do any good, you should plug the device into an alternative power outlet.
That’s to say because often during power outages, the wall outlet of your Xbox may go faulty and you will have to plug the device elsewhere.
Disengage the wiring of your Xbox and move it towards a different wall outlet that is proven to work.
If you had another device plugged into the wall outlet before, and it worked perfectly, you will know that the power source is healthy for your console.
Alert: To repair your previous wall outlet, better call a technician since there is a danger of electric shock if you’re not familiar with what to do.
If nothing from our suggestions worked so far, perhaps there is a problem with the power supply components of your Xbox.
More accurately, either the power adapter has gone faulty or the brick needs a replacement.
Let’s begin with replacing the power adapter:
- Make sure that your Xbox is shut down (the LED on your power brick is OFF).
- Disconnect the adapter from the brick and from the power source.
- Acquire a new, standard power adapter of the same type.
- Plug it into the brick and then the outlet.
- Double-check if the LED on your power brick is OFF.
- Disconnect the brick from the adapter.
- Acquire new Xbox One brick ($20 to $30 from nearby technical stores).
- Attach the new brick to your setup and test.
Note: Make sure to test your Xbox both after replacing the power adapter and then after replacing the brick.
Thus, to fix Xbox One that won’t turn on after a power outage, soft and hard reset the console first. Plug it into an alternative power outlet and boot in safe mode as you repair the software. Finally, replace both the power adapter and power brick and test the console in-between.
Read Next: How To Fix Xbox One Orange Light Of Death?
Now that you know why Xbox One won’t turn on after power outage and how to fix the issue, use our solutions as you like!
Don’t forget that Microsoft can always help you with any issues you may have on your Xbox and also don’t forget to put your warranty into use if it’s still active.
- How to Use Sengled Bulb Without Hub? – Complete Guide - September 26, 2022
- How to Fix Crunchyroll Offline Viewing Not Working? - September 26, 2022
- Graco Swing Not Working When Plugged In? – Complete Fix Guide - September 26, 2022