A recent discussion across the technical forums online is “Why is my Altice remote blinking?”. If you are having trouble with your remote even since the lights started to blink, here we will learn how to troubleshoot it.
In this post, we are going to reveal the most common issues that could be causing your Altice remote lights to blink, and hopefully, we are going to resolve the problem.
In most cases, the Altice remote lights are blinking because the batteries are low, but sometimes the issue is far more serious. In that regard, we are going to inspect your Bluetooth functionality, restart your device and even perform a factory restore if necessary.
Before we apply any troubleshooting techniques we will try to identify where the issue is coming from in order to save a lot of worthless efforts.
What Does Altice Remote Blinking Mean?
We assume that if you are here then you’re asking yourself “why is my Altice remote blinking mean?”
Also known as “status lights”, the flashes are indicating that some feature is out of order.
As we mentioned in the introduction, if the lights on your remote blink, most of the time this is a sign of no good.
It generally means that the device is trying to pair or something does not work as intended.
In that regard, you should ensure that there is no obstacle or an item in front of the box’s receiver that could be blocking the infrared transmission signals.
Furthermore, check your network to identify if the local host is up, otherwise this might be the reason for your Altice remote blinking lights.
It is also recommended to inspect the batteries, which certainty causes the lights on your Altice remote to blink once there is no current left to power the device.
If any of these recommendations did not manage to resolve your Altice remote blinking lights issue, it is time to carry out some further troubleshooting.
How to Fix Altice Remote Blinking Lights?
Now when we answered your question “why is my optimum Altice remote blinking” it is time to fix it.
Here we are introducing several troubleshooting methods that are proven to resolve blinking lights on Altice remote.
Feel free to try all of them in numerical order to prevent unnecessary actions.
Method #1 Check Bluetooth
We should underline the fact that besides infrared (IR) waves, the Altice remote is using Bluetooth to deliver functionalities such as unconditional aiming and voice commands.
Blinking lights on the Altice remote could mean that the device is not paired and currently scanning for available connections.
In method #3 we are going to perform a re-pairing procedure but for now, just ensure that the device is paired, otherwise, the lights will definitely be blinking.
Method #2 Restart the Altice Box
The signal receiver sometimes becomes faulty due to the effect of multiple applications and restart seems the fastest workaround.
The primary connection source that the receiver is using is Bluetooth and as we learned in the previous method it is fundamental.
Without Bluetooth connectivity, your remote will not be recognized and the lights on your Alice Remote will be blinking.
Restating an Altice Box cannot be simpler:
- Take out the power chord off the Altice box
- Wait for about 3 minutes
- Plug it back in
By performing the restart the Alice box Bluetooth will disconnect from all devices and connect automatically after the service is back online.
If the blinking lights issue is related to the Bluetooth, at this point the flashing should be gone.
Method #3 Troubleshoot the Altice Remote
Sometimes the issue is found in the remote itself and all other Altice functionalities do not seem to be involved.
In this method, we are going to re-pair your remote and hopefully restore your remote to its working state.
Before you proceed with the steps below ensure that the batteries are not warned out and the Alice box has been restarted as described above.
- Access the “Settings” menu on your Altice box by pressing the “Home” button
- Go to “Preferences” and select “Pair Remote”
- Press and Hold the numbers “7” and “9” for at least 5 seconds when you are asked to do so during the pairing process
Upon successful pairing, you will be alerted by a large prompt saying, “Pairing Complete”.
If the lights on your Altice remote have stopped blinking it means that a simple re-pairing was everything needed to resolve the issue with the remote.
Method #4 Factory Reset
This method is a last resort if none of the above-described solutions managed to resolve the blinking lights issue on your Altice remote.
In this method, we are going to restore the factory default settings on the Altice box and all configurations and personal settings will be deleted.
Make sure to take a brief peek or create a backup of your settings so you can easily restore them after the factory default reset.
To restore the Altice box to default factory settings follow the steps below:
- Locate the reset button on the back of the Alice box
- Press the button and Hold itfor at least 20 seconds
- You can release the button off once the Altice box reboots
Upon successful restoration, you will be provided with the initial setup that the Altice box requires just like it is brand new.
You should be able to get the TV service back in few minutes and hopefully, the blinking lights issue will be gone.
Method #5 Replacement
All of the above-listed solutions are proven to resolve blinking lights on Altice remote and if your issue is still not resolved you might have a faulty unit.
We recommend visiting an Optimum Store and asking, “why is my Altice one remote blinking?” in order for a qualified technician to take a look at it.
It is highly likely for the remote to experience hardware issues and it is not much you can do at home if you are not a techy person.
If you don’t feel like repairing your remote you can always buy a new one but remember that any third-party universal remotes will not work will the Altice box.
Even if some of them manage to interact with the Altice box, you might seriously impact the Altice box reader and even the software.
We can safely conclude that the Optimum Altice Remote blinking issues can be caused by several reasons and identifying it might be frustrating and time-consuming.
We hope that we have answered the question “Why is my Altice remote blinking” and our methods were able to resolve the blinking lights issue.
Read Next: Should you unplug Roku when not in use?
- Kwikset Smart Lock Code Change – FoolProof Guide - May 25, 2023
- How to Connect Turntable To Marshall Speaker? - May 25, 2023
- Asko Dishwasher Not Drying? – Complete Fix Guide - May 25, 2023