Are you wondering about the process of how to reset Ring Spotlight Camera but you’re uncertain how to do it?
In that case, you’ll be happy to know that there are a few different methods! In fact, each of them is good to know, as they all function differently and uniquely.
The fastest way to reset the Ring Spotlight Camera is by pressing and holding the reset button on the top of the camera for thirty seconds and waiting for it to reset itself. However, you can remove the batteries and replace them.
Also, you can change or modify the wire, or you can reset it via your phone or the Ring app.
In this article, we’ll cover the different reset methods in detail.
That way, you’ll have a complete understanding of how to perform each of them, what they do, and why you might want to do them.
Before we get to the methods to reset your Ring Spotlight Camera, let us first cover two (2) of the primary signs to look for, giving you an idea of when your device needs a reset.
Your camera should always show a clear and sharp picture no matter what.
If you see that the image quality is terrible, blurry, or choppy, then a reset could be what your spotlight camera is looking for.
This is more than likely the result of dying batteries, faulty wires and/or cables, or something related to the device’s actual camera.
Generally, you can rule out any relations to software with this particular issue because it will oftentimes be because of the hardware.
If your camera’s audio quality does not sound good, the cause can somewhat depend on whether the issue arises in live feeds or recordings.
Bad audio in recordings often results from something within the device’s settings.
Usually, they’re fixable with a simple reboot. In contrast, a poor connection between your device and your router can cause lousy audio and video in your security camera’s live feed.
A reset can fix the second situation. But that’s not all. In fact, adjusting your router’s location in relation to your security camera can also be a resolution to the problem.
Poor audio and visual quality are the first and most obvious signs that your Ring Spotlight Camera needs a reset.
So, what is the process of resetting your Ring Spotlight camera? Do you need an expert or a professional to do it for you? Not quite!
In our guide below, we’ll be giving you the steps completely and comprehensively on how you can reset your Ring Spotlight camera!
Here are the five different methods of resetting your Ring spotlight camera without the need of a professional!
We’ll help you solve it with ease!
Performing a factory reset will make your camera return to its default settings.
Meaning it will revert to the settings where it was before when you first purchased it.
To manually reset your Ring Spotlight Camera, follow the steps below:
- Press and hold [SETUP] on top of your camera.
- Hold it for about thirty (30) to forty-five (45) seconds.
- Watch the status light that sits at the bottom of the device.
- Once you see it flash multiple times in rapid succession, the camera is restarting.
Sometimes, your camera will restart when you do this, but it will fail to make it through its initial setup stages.
When this happens to your camera while attempting to reset, the best way to remedy the issue is by uninstalling and reinstalling the Ring app on your phone.
Doing this will allow you to reconnect the camera to your phone via the Ring app and set it up that way.
The following method for resetting your camera involves the use of whatever phone you link to the device.
Of course, given the fact that the device is installed with the Ring app.
Using the phone to reset your device is easier than the factory reset, as you don’t have to press down your camera’s reset button for thirty seconds.
Instead, what you’ll need would be the Ring app on your phone.
- Open and access the Ring app on your phone.
- Then, navigate to Settings > Reset.
- From there, you’ll see an option to Restart or perform Factory Reset.
- Choose the latter and wait for confirmation that the process has been accomplished.
NOTE: Factory resetting via the phone would yield a similar result when you press and hold [SETUP] on the camera.
Another method to perform a reset of your Ring Spotlight camera is by changing the batteries that are inserted in the camera.
Although this method won’t clear out any saved data, it’s still a good way to refresh your Ring Spotlight camera’s connectivity.
If your camera is a wireless one that you charge regularly, faulty batteries are not uncommon, primarily if you have owned the camera for a long time.
How to Know if Batteries Are Going Bad?
To determine if your camera has bad batteries, open the battery compartment at the camera’s base and remove the battery inside.
Look for damage, corrosion, or any other signs that the battery is not in good condition, and if you see something that does not look right, you will likely want to get a replacement battery.
Furthermore, you can try inserting the battery on a different device to check if it’ll still work.
A faulty battery may not be the source of any troubles your camera may have, but if you try a fresh one and find that your device starts working perfectly fine, that likely means the old battery had some issues.
If you own a hardwired Ring Spotlight Camera, then troubleshooting it would require you to meddle with the wires/cables that make up your Ring Spotlight camera.
For a hardwired camera, you’ll have to check the device’s wire to see if it is faulty.
Unfortunately, checking the wire is a bit more complicated than checking the batteries, as you usually can’t simply look at a wire and determine its condition immediately.
So, to do this method:
- Open the front panel of the Ring Spotlight camera to reveal the wires.
- Look for any signs of damage like frayed wires, corrosion, cut wires, etc.
- When you find any of these, use a wire cutter to slice off the coating, revealing the wire.
- Then, reconnect all wires back into place.
NOTE: It’s important that you note where the wires are connected so you won’t problematize where to connect what.
Like battery-changing and wire adjusting, a restart of your Ring Spotlight camera can be done by disabling and reenabling WiFi on the device.
In other words, disconnecting and reconnecting.
To reconnect your camera to WiFi, go to the Ring app on your phone and select the three lines that sit in the top left corner of the app menu.
A list of options will appear, from which you’ll want to choose Devices.
Next, select your security camera from the devices list, and the device dashboard menu will then appear.
From here, you can choose Device Healthto access the WiFi settings, and the WiFi settings menu will have the options to Reconnect to WiFi and Change WiFi Network.
Once you disconnect and reconnect your camera to the WiFi, use it as you usually would and test it to see if it is functioning correctly.
Read Next: How Far Can Ring Camera See?
You can reset your Ring Spotlight camera via the device, the Ring app, change the batteries, replenish the wires, and disconnect/reconnect it to WiFi. Choose the process that you think is the most appropriate one!
With everything we covered in this article, you now know how to reset Ring Spotlight Camera using various methods!
While these methods should work perfectly well if you cannot reset your Ring Spotlight Camera, dial Ring’s customer support to receive further help and assistance.