Asking how to reset GE refrigerator after power outage? Here’s how!
If the GE refrigerator has just undergone a power outage and refuses to work, there’s a simple way to reset it!
We will go over the best methods you could use to perform a reset on your refrigerator in case it stopped working after a power outage.
Let’s learn more!
To reset the GE refrigerator after a power outage, unplug it from the power source. Then use the “SHUT OFF” Switch or turn off the power through the circuit breaker. In case that doesn’t help remove the power dividers and change the power source!
Let’s next learn how to reset the GE refrigerator after a power outage!
About Resetting GE Refrigerator!
Sometimes, after a power outage, our GE refrigerator might behave weirdly or not turn on, since it’s one of the largest consumers in our kitchen.
This sometimes happens because when the power kicks back in, the voltage is lower than usual.
Wait for at least 10 minutes after the power outage!
In case the issue with the GE refrigerator keeps appearing even after the power has been back for a couple of minutes, then we need to refresh the device.
Let’s learn how!
How to Reset GE Refrigerator After Power Outage?
Resetting the GE refrigerator after there has been a power outage is really easy and could be done in several ways.
The basis of the reset after a power outage is to cut the power to your fridge for a particular amount of time.
Here are the methods to reset the GE refrigerator after a power outage:
Method #1 Unplug from Power Source (Power Cycle)
The first and most preferable method is to simply disconnect your fridge from the power source.
This will discharge the device temporarily and refresh its power supply as a result after replugging it.
This is the best possible method to reset a GE refrigerator after a power outage!
Here’s how to power cycle your GE fridge properly:
- Disconnect the GE fridge from the respective Power Source.
- Unplug the power adapter’s other end from the refrigerator.
- Wait for 5 minutes while the fridge is disconnected from power.
- Re-attach the power adapter of the fridge device to the source.
- Turn the device on and test.
The longer you keep the GE refrigerator disconnected from the power source, the better it will discharge.
This method will also allow the device to cool down and start fresh.
In case that method didn’t help, jump forward!
Method #2 Use the “Shut-OFF” Switch
If a power cycle didn’t work, you can use the fridge’s Shut-OFF Switch to perform an advanced power cycle on the refrigerator.
This method is proven to work when the GE refrigerator has experienced a power outage.
Here’s how to use the “Shut-off” switch to reset your fridge after the power cycle!
- Unplug the fridge from the Power Source.
- Locate the shut-off switch on the Fridge’s Panel.
- Press the shut-off switch on the fridge.
- Wait for 30 seconds.
- Push the switch towards the “ON”.
- Plug the fridge’s power adapter back into the power source.
- Wait for the fridge to start.
Once the fridge starts up, check if the problem that occurred with the device is now fixed.
In case the problem is persistent, you’ll need to reset the power from the main circuit.
Method #3 Reset Power from the Breaker!
An alternative way to reset your GE fridge after it has undergone a power outage is to refresh the device from the circuit breaker.
Every house has a circuit breaker, which separates the rooms on a different fuse.
By turning OFF/ON the circuit breaker you’ll refresh all fuses!
Here’s how to reset your GE fridge using the circuit breaker:
- Locate the Main Circuit Breaker.
- Open up the Panel Cover.
- Switch OFF or Unscrew the fridge’s room Fuse.
- Wait for 60 seconds.
- Install or turn ON the fuse back.
- Wait for the power to kick in.
Once the circuit breaker has been reset, turn on your fridge and test. Simply turn on the refrigerator and check whether all functionalities are intact.
In case there is a problem after the power outage and your fridge does not turn on, we’ve got you covered.
Let’s next perform some GE refrigerator troubleshooting!
GE Refrigerator Not Working After Power Outage – Fixed!
If resetting the fridge didn’t help, there are alternative ways to troubleshoot this problem.
We will guide you through some general solutions that are recommended by the community.
The guide below will help your fridge recover from the unfortunate power outage.
Alert: Follow the chronological order of our solutions to achieve the best results!
Solution #1 Plug into a Different Source
Chances are that the power source of the GE refrigerator burnt out during the power outage.
Although this is more of an unlikely scenario, you should still plug the fridge into an alternative power source only if possible.
Power Cord Extender?
Assuming there’s only one single power source and moving the fridge is not an option, one possibility remains for you.
This is getting a Power Cord Extender to lead through the nearest power source and connect the GE refrigerator.
There are extenders in different sizes (20 feet, 100 feet, etc.). You should measure the distance between the GE fridge and the nearest power source that you will be using.
Tip: Find the Power Cord Extender you need at the bottom of this guide!
Solution #2 Replace the Power Adapter
If your GE refrigerator refuses to work after the power outage, chances are that the adapter that came with the device has stopped working.
Power outages most often harm the power equipment of our devices that are connected when the power kicks back in.
The GE fridge uses a WR23X10300 General Electric Power cord for connection!
Those types of power cords are available on Amazon at an approachable price and can be replaced easily.
However, be careful when interacting with your fridge’s power supply, and make sure to unplug it from the power source first.
When installing the new adapter, make sure that it’s securely connected.
Solution #3 Remove Third-Party Connectors
Another component that could have gone faulty after the power outage is any power strips or third-party connectors in your setup.
This is why it’s important to remove any of the connectors in between and hook up the GE refrigerator directly to the wall outlet.
The following devices could have gone faulty as a result of the power outage:
- Wall Outlet Plugs that have multiple Connections Ports
- Weak-voltage power strips or dividers
- Surge Protectors that consume additional electricity from the source
Make sure that none of the following devices exists in your GE refrigerator power setup.
When you’re ready, scroll up to attempt and reset your fridge with the guide above and check whether all functionalities are now working. Good Luck!
Let’s recap what we’ve learned in this guide so far!
To fix a GE fridge that refuses to work after a power outage, unplug the device from the power and replace its Power Adapter. Then use the “SHUT OFF” Switch to refresh the refrigerator’s operation. In case nothing helps, reset the Power Breaker!
We hope that you’ve learned how to reset GE refrigerator after power outage and now the problem should be gone.
This is not the first time someone with a GE refrigerator has encountered this problem and luckily, there are plenty of solutions you have at your disposal.
In case you’re looking for a Power Cord extender, we strongly recommend Surge Protector Power Strip to keep your devices safe.
This is the component that will get impacted by the power outage instead of the GE refrigerator!
- Why Won’t My Bush TV Connect To WiFi? (Quick Fix Guide) - September 25, 2023
- Bush TV Not Turning On? – (Fix In Minutes!) - September 25, 2023
- Bush TV Sound But No Picture? – Here’s How to Fix! - September 21, 2023