Wondering how to make Ethernet ports active? Search no further, because you’ve just found the best article containing the correct approach.
We will get you familiar with all of the details you must know regarding the process as well as the whole installation process of your Ethernet ports!
To make the Ethernet port active, first, open the control panel of your PC and head to the network options. Click on “change adapter settings” and scroll down until you find a respective tab for Ethernet. Choose the enable button and as a result, the port will become active.
Since most users require an in-depth explanation, we’ve designed a step-by-step tutorial to help you activate your Ethernet ports easily!
To enable your Ethernet ports, you must be aware of a couple of things.
The Ethernet cable connected to your PC from the Ethernet outlet must be working correctly to transfer the internet under any circumstances.
However, you could still activate your Ethernet ports, but without the cable plugged in, your PC won’t be supplied with any internet.
Having that in mind, let’s check out what are the steps for making your Ethernet connection active.
The first step is to navigate to the settings of your PC. If you’re on Windows, which we already assume, the general settings tab would be called “Control Panel”.
Here is how to reach the control panel on your Windows PC:
- Press the “Windows” button on your keyboard to open the start menu.
- In the start menu, write “control panel” and wait for results to be found.
- After the settings tab is found, hit the “Enter” button and the control panel will be automatically opened on your screen.
Tip: The control panel contains all of the settings you will be needing for this configuration, including the Ethernet adapter settings.
Once you have gained access to the control panel of your PC, it is now time to navigate to the Ethernet settings and enable the ports.
To go to the Ethernet tab, in your control panel, you must find the network settings tab.
After clicking on it once with your mouse, you will be redirected to the network and Internet settings, where you should find the Network Connections.
The Ethernet tab, also called the network connections tab should be located somewhere in the middle of the page and you can select it by pressing on it.
After getting into the network connections tab, your next step is to change the adapter settings.
In the network connections tab, there should be a blue button on the left side of the panel, labeled as “Change adapter settings”.
Click on this button once and now on your screen, you should be able to see all of the Ethernet connections.
Now to enable the ports by following the steps down below:
- Go to the adapter settings to view all Ethernet connections.
- For you, there should be one Ethernet connection, transferred by the cable that is connected to your PC.
- Tap on the Ethernet connection with the right button of your mouse and in the settings prompt, tap “Enable”, which should be on the top.
Keep in mind that once your PC has scanned the cable, even when unplugged, you would still be able to view the created Ethernet interface.
To supply your PC with internet via Ethernet cable, however, you must have the cable plugged in.
Now when you’re aware of how to activate your PC ethernet ports let’s find out how to do the same thing with wall outlets as well.
Since many users reported their wall Ethernet connection as slow or faulty, here are some steps to get it going:
The first and most essential step is to connect all of the wires inside of the port.
Technicians would usually do this, but sometimes cables are left unplugged, which might essentially interrupt the internet.
Here is how to take your Ethernet port apart and connect the wirings:
- Grab a screwdriver matching the screws on your Ethernet port.
- Flip the circuit breaker for your room to avoid the potential danger of electric shocks.
- Unscrew all screws on the compartment and take it off the wall stand.
- On the back of the port, there should be two entries for cables and two wires in green and red color.
- Connect the colored wires with the respective slots on the back of your port by screwing them around the electric pole.
Install the Ethernet port back on the wall.
If connecting loose wires didn’t seem to fix the issue, perhaps there is a fault with the jacks of the Ethernet cables.
The Ethernet cable going in your Ethernet wall outlet must be tightly secured and the security plated on the top of the cable must be pushed all the way down.
In addition, ensure there are no installation leftovers inside of the ports that might be preventing the Ethernet cable from going all the way in.
Don’t hesitate to use a little force to plug the Ethernet cable, because otherwise, you won’t get any internet.
At last, you can give the router ports a good look as well.
If everything is correct at the Ethernet wall outlet’s end, then perhaps the issue might be found with your router’s establishment.
Here are some steps to diagnose the router ports:
- Plug the Ethernet cable into the yellow slot on your router.
- Try using each one of the blue outlets and test after using each one.
- Make sure the security latch on the cable is going all the way in when plugging.
- Check for any dust or remains inside of the router ports.
Once you’re done, you should have fixed your Ethernet now.
Note: If you’re still having the same issue and your ports are not working, the problem might not be related to your ports at all.
You should consult with your ISP, and if possible an IT engineer to come over and make an inspection.
To enable the Ethernet port, go to the “Network & Connections” tab in your control panel and enable the respective connection. For wall outlets, make sure the cables are secured, inspect the jacks, and check the router ports as well.
Now that you know how to make Ethernet ports active, with our simplified steps you shall face no difficulties in your way of enabling the Ethernet ports.
In the end, configuring your Ethernet ports is an easy task, as long as you’re doing it right!
- YouTube TV NBC Not Working? – Complete Fix Guide - February 2, 2023
- Echo Dot Won’t Connect To Fire TV? – Complete Fix Guide - February 2, 2023
- Homekit Remote Access Not Working? – Here’s How to Fix - February 2, 2023