electrolux dryer error code e64

Wondering how to fix Electrolux dryer error code E64? No worries, we’ve got you covered!

Such as any other device that occasionally provides error codes, the Electrolux dryer also informs the users of faults this way.

Let’s unwrap the meaning and solution for error E64 on your Electrolux dryer in an attempt to solve the error code in a matter of seconds!

The “E64” error code on Electrolux dryers mainly indicates an issue with the heating system, such as a faulty thermal fuse, blocked vents, or faulty heating element.

The solution for the E64 code is to inspect all involved and suspected components. 

Let’s next unwrap the reason why error E64 appears on the Electrolux dryer:

What Causes Electrolux Dryer E64 Error Code?

reasons for electrolux e64 error

If your Electrolux dryer is giving you an “E64” error code on an appliance control panel, then there might be something wrong with the dryer heating components.

The heat is essential for the dryer’s functioning, so it is crucial to know what causes this hurdle.

The following are the most potential causes of Electrolux e64 error:

  • Defective Heating Element
  • Faulty High Limit Thermostat
  • Malfunctioning Control Board
  • Blown / Faulty Thermal Fuse
  • Loose Wiring Connections
  • Clogged / Dirty Dryer Vent
  • Faulty Dryer Heating Sensor

Let’s next proceed straight into the solution guide and solve error E64 on your dryer!

7 Solutions To Electrolux Dryer Error Code E64? 

Quick Tip: Following the guide in order will help you solve the error code faster!

1. Fix a Loose Wiring

fix loose wiring

The very first thing you have to check is the wiring connection throughout the Electrolux dryer appliance.

Since the dryer heating element works when it gets power and the same applies to other components, dissemble the dryer to check for any loose wiring that can be fixed.

Tip: Check the heating coils, motor, and thermal fuse wiring connection!

2. Check the Dryer Vent For Blockages

Occasionally, when the dryer vent blocks completely, it restricts the airflow inside the dryer and then the heating element doesn’t work as it should.

Check that your Electrolux dryer vent is clear of obstructions by giving it a thorough cleaning.

check and clean dryer vent

Here is how to check the dryer vent for blockages:

  1. Unplug the dryer from the power outlet.
  2. Unscrew the back panel of your dryer.
  3. Locate the vent hose from the back.
  4. Remove the vent lid or the hood.
  5. Then look into the vent for blockages.
  6. Tip: Use a flashlight for better orientation.
  7. If the vent is blocked, clean it using a vacuum.
  8. (Optional) Wash the hose by using soapy water.
  9. Connect the vent hose back to the dryer.
  10. Close the vent lid and screw the back panel.

When you’re ready, check whether error E64 will still appear on the Electrolux dryer!

3. Inspect the Heating Element

Next, check the heating element of your Electrolux dryer, as it is the primary source of heating the dryer air.

Perhaps the heating element in your dryer is experiencing some issues, such as cracks, wear and tear, loose wiring, or malfunctioning.

inspect heating element

Here is how to check the dryer heating element:

  1. Turn off the dryer power and unscrew the cover.
  2. Next, unscrew the mounting brackets of the panel.
  3. Disconnect the wire connector from the panel.
  4. Open the door and unscrew the housing for the lint filter.
  5. Then lift the dryer and place something hard underneath. 
  6. Unscrew the lower panel screws of your dryer.
  7. Next, unscrew the top front panel of the dryer.
  8. Disconnect the wires connector from the control board.
  9. Then hold the front cover of the dryer and remove it.
  10. Unscrew the control board bracket screws.
  11. Next, unscrew the lower and front bulkhead mounting screws.
  12. Take out the bulkhead from the dryer and place it aside.
  13. Next, take out the drum and locate the heating element.

If the heating element is broken, damaged, or has defective wires connection, replace the component to remove error E64. In case the heating element is intact, keep reading!

If the heating element is in working order, then before reassembling, check the fuse and thermostat!

4. Check the High Limit Thermostat

check the high limit thermostat

The high-limit thermostat controls the dryer’s heating temperature. However, with time, it usually develops issues that prevent it from effectively controlling heat.

So, you just have to test the thermostat to determine whether the high-limit thermostat is the cause of the E64 code!

Here is how to check the Electrolux dryer high-limit thermostat:

  1. Unscrew the top and front panels of the dryer.
  2. Disconnect the control panel and control board.
  3. Remove the front bulkhead and the drum.
  4. Locate the high-limit thermostat from the top.
  5. Undo the high-limit thermostat’s screws.
  6. Disconnect the wires connected to the thermostat.

When you’re ready, acquire a Multimeter to perform a continuity test, that would suggest whether the high-limit thermostat is faulty.

If the multimeter shows continuity, set it back.

5. Test the Thermal Fuse!

If the heating element and high-limit thermostat are functional, a blown thermal fuse may be the cause for the E64 error code Electrolux dryer.

Every time the temperature of the heating element exceeds a certain level, the thermal fuse blows. 

test the thermal fuse
Note: You cannot reuse a blown fuse, so you must replace it!

Here is how to test the thermal fuse in your Electrolux dryer:

  1. Turn off the Electrolux dryer power supply.
  2. Unscrew the top and front dryer covers.
  3. Disconnect both the control board and panel.
  4. Locate the Thermal Fuse in the appliance.
  5. Tip: The fuse is above the heating element.
  6. Unscrew the Tfuse and remove the wireless.
  7. Test the thermal fuse with a Multimeter for continuity.
  8. Check the results:
  • If the meter shows a reading of 10 or less, then the fuse is in working order.
  • If the meter shows another reading, the component has to be replaced.
Note: Make sure to purchase the components compatible with your Electrolux dryer!

6. Inspect the Gas Igniter!

inspect the gas igniter

One of the reasons why the Electrolux dryer displays error E64 is due to a faulty Gas Igniter, responsible for the main ignition.

The component is located under the control board housing and once again you need to remove the front bulkhead and drum to access the igniter.

In addition, you would need a wrench to lose the gas supply line in order to remove the igniter and check the assembly for any faults.

Again you can use a Multimeter to perform your measuring but keep in mind that a faulty gas igniter shouldn’t be tested.

Tip: Calling a professional is a good approach when the gas igniter appears to be faulty!

7. Replace the Control Board

Sometimes the Electrolux control board of the dryer malfunctions and stops its workability.

It is possible that the control board in your dryer is defective, which is why it is not providing power to other heating components, hence error E64 appears on the screen.

replace the control board

It’s only important to stop the power supply to the drier before reaching in for control board inspection due to the risk of short circuit.

Then you only need to inspect the control board for blown fuses, capacitors, or other melted areas.

The replacement of the main board is easy as long as you snap an image of all connected wires and the placement of the board.

Then you can purchase Electrolux Control Board and attempt the replacement at home.

Note: Replacing any of the parts in your Electrolux dryer voids the warranty!

Still Need Help?

If you feel that the heating issue of your dryer (error E64) has still not been addressed, or the situation is beyond your control, call a technician.

However, we recommend you reach out to Electrolux Support for additional help, if you don’t know where to start. Good luck!

Quick Recap:

Whenever the Electrolux dryer error code E64 appears, check for loose wiring within the appliance, clear the dryer vent blockages and inspect the heating element.

In addition, it’s recommended to test the thermal fuse, high-limit thermostat, gas igniter, and control board.

Read Next: How to Fix Electrolux Washer Not Spinning Issue?

Nicole B