What to do when the Nest Doorbell overheating becomes a problem?
Nest Doorbell is very useful but can overheat depending on some conditions such as the environment it is in. Other times the issue is electrical and you must be careful.
When the Nest Doorbell is overheating, you must check the charging components as well as all wiring and electric-related parts. Alternatively, check if the device is placed where it doesn’t get enough air.
Below you will check all the solutions available to deal with Nest Doorbell’s overheating!
Nest Doorbell Overheating – Learn 8 Solutions
Solution #1: Verify The Charging Components
Is your Nest doorbell camera overheating? The first step is to inspect the key charging components.
In this case, we’re looking at the charger/transformer utilized by the Nest Doorbell.
Varying with your Doorbell’s specific series, it typically supplies between 16 and 24 VAC.
Follow these steps to pinpoint the problem:
- Try using your Nest Doorbell charger on another electrical socket for testing.
- Open up your doorbell to access the transformer’s connecting wires.
- Ensure the wires are securely connected to the doorbell (adjust them if they seem loose).
- If the problem continues, attempt using a different charger with the correct specs as an alternative.
If you need to replace the transformer, it’s a straightforward process.
And remember, if the warranty is still active, consider reaching out to Google to require a replacement rather than spending your own money.
Solution #2: Clean The Charging Port
The Google Nest doorbell overheating could also stem from problems with the charging port itself.
It may be dirty, rusty, or damaged. Assessing and resolving this issue is a quick and easy task if you have the right tools on hand. You’ll need isopropyl alcohol and an anti-static brush.
Here’s how to go about it:
- Disconnect your Nest Doorbell from the power outlet.
- Detach the transformer from the device.
- With the anti-static brush, carefully remove all dust and dirt from the contacts where the transformer attaches.
- Next, use isopropyl alcohol to clean any residues, restoring your device to full functionality.
After ensuring everything is clean, reassemble your device and reconnect it to the power outlet.
Sometimes, the problem originates from areas where the doorbell accumulates dirt, so it’s a good practice to clean it periodically.
Solution #3: Adjust Or Replace The Battery
For Nest Doorbell devices that run on a battery, a range of issues can arise with the power source.
It might be dislodged, too old, damaged, or simply exhausted. Thankfully, accessing and managing the battery is a simple procedure.
Here’s what to do:
- Take the Nest Doorbell off the wall.
- Open the device to reach the battery.
- Find the battery and make sure it’s securely in its place.
- If it has shifted, adjust it to the correct position.
Replacing The Battery
If your Nest Doorbell doesn’t respond after ensuring the battery is secure, proceed with the battery replacement:
- Gently remove the old battery from its housing.
- Take care not to damage the interior parts.
- Put a new battery in place of the old one.
- Reassemble your Nest Doorbell.
When buying a replacement battery for your device, make sure it’s a Lithium-Ion battery with a rating of 6 Ah and 3.65V.
This should restore your device to proper functionality.
Solution #4: Check The Wiring
Is your Nest doorbell still overheating? If you’re using the hardwired method to power your Nest Doorbell and it’s acting up, the problem might stem from the wiring connecting the device to your home.
Addressing this issue requires some effort, but it’s worthwhile to ensure your device functions consistently.
Follow these steps:
- Turn off the circuit breaker that supplies power to your Nest Doorbell.
- Remove the cover or faceplate to expose the wiring.
- Disconnect the wiring.
- Grab your multimeter.
- Use the multimeter to test for continuity or verify the specific voltage (refer to the Doorbell’s user guide for the required VAC).
- If the test yields fluctuating results or below the required, you should replace the wiring.
When replacing the wiring, you’ll need to disassemble the Nest Doorbell.
That presents an opportunity to inspect the device’s interior for any dirt or rust and clean it thoroughly.
Solution #5: Verify The Environment
One common cause of the overheating Nest Doorbell is the environment where you place it.
For example, placing it on your front door requires you to ensure that no direct sunlight stays over it.
Some additional guidelines will help you determine the best way to position the Nest Doorbell:
- Ensure that the Doorbell stays in a place where fresh air is abundant.
- Sunlight will damage and make the device overheat, so protect from it.
- Nest Doorbells must not be placed inside containers or anything of the like.
- Install a shade for the Doorbell camera if possible.
Solution #6: Clean The Device
Cleaning your Nest Doorbell on a regular basis is a great way to maintain its performance and prevent issues caused by overheating due to dirt and debris accumulation in its vital electronic parts.
To clean it effectively and with care, follow these steps:
- Remove the Doorbell from its mounting.
- Disconnect the transformer.
- Disassemble the device to access its interior.
- Use isopropyl alcohol along with a paper towel and an antistatic brush to thoroughly clean away any dirt or debris.
- Reassemble the device.
- Observe how it functions now.
When cleaning electronic devices, it’s safest to use isopropyl alcohol and an antistatic brush to avoid damaging delicate components.
While some may use various brushes, an antistatic brush ensures that you won’t harm any small and sensitive parts.
Solution #7: Update Your Nest Doorbell
Keeping your Nest Doorbell’s firmware current is vital for optimal performance and security.
Although manual updates aren’t supported, ensuring your device automatically receives the latest firmware is essential.
Here’s how to check and configure your device for automatic updates:
- Launch the Nest app on your smartphone.
- Access the list of your devices.
- Select your Nest Doorbell from the list.
- Go to the device’s settings (typically represented by a gear icon).
- Look for information regarding the software version.
- Ensure that the automatic update feature is enabled.
Visit the official Google website to check the latest available firmware version for your device.
Doesn’t the version on your Nest Doorbell match the latest version available? Then don’t hesitate to contact customer service to request the company to push a remote update to your device.
Solution #8: Reset The Doorbell
Do you suspect your Nest Doorbell is overheating due to a deep firmware issue? It could also be the reason behind the lack of updates.
Thus, performing a reset can help resolve the problem. Thankfully, resetting is a very easy process as you can check below.
Reset Via The Nest App (If Your Doorbell is Responsive)
Here is how to reset the app:
- Launch the Nest app on your mobile device.
- Navigate to your list of devices.
- Select your Nest Doorbell.
- Access the device’s settings by tapping the gear icon.
- Choose “Remove Device” and then confirm the action.
Physical Reset (If Your Doorbell Isn’t Responsive)
Examine the base of your Doorbell and locate a small hole located between the power cord and the camera’s neck.
Follow these steps for a physical reset:
- Insert a paperclip into the hole.
- Press and hold the paperclip down.
- Wait approximately 10 seconds until the status light blinks four times, accompanied by a countdown chime.
- Subsequently, the status light will turn solid yellow, and you will also hear a confirmation.
Following the physical reset, proceed to the Nest app to reconfigure your Doorbell. Ensure it can charge and check if the overheating issue persists.
Alert: If problems persist despite these reset steps, it's advisable to contact the manufacturer for further assistance in resolving the overheating and firmware issues.
When the Nest Doorbell overheating becomes a problem, you will need to assess the charging and wiring components.
Moreover, Google recommends Nest Doorbell owners keep it in a place where the device receives enough fresh air.
Keep reading the blog if you have more doubts regarding Nest Doorbell!
- SimpliSafe Says Entry Sensor Open? (Here’s Your Fix) - February 25, 2024
- SimpliSafe Glass Break Sensor Offline? (Fix It Fast!) - February 25, 2024
- Sensi Thermostat No C Wire? (Fix & Install Now!) - February 25, 2024