Are you seeing the Gosund Smart Plug red light? We can fix it in an instant!
Gosund Smart Plug is magnificent, but the red light sometimes starts blinking to tell you that something is not right.
If you see the Gosund Smart Plug blinking red, you need to first check for physical interference. Alternatively, the issue requires you to assess if the router and network settings are optimal for the device.
Below you will learn all the official solutions you can quickly perform at your home!
Gosund Smart Plug Red Light – Learn 8 Solutions
Solution #1: Eliminate Physical Interferences
When your Gosund Smart Plug stubbornly displays a red light, it might be grappling with physical interferences in its vicinity.
Physical obstacles, like thick walls and furniture, can obstruct the Wi-Fi signal, hindering proper connectivity.
Additionally, too many devices nearby might lead to interference.
- Inspect the area around your Smart Plug for any obstructions, thick walls, or heavy furniture that might be blocking the Wi-Fi signal;
- Move some of that furniture if possible;
- Try relocating the Smart Plug closer to your router to improve signal strength or vice-versa;
- Ensure that there are not too many devices around the Smart Plug causing signal interference;
- If you have many devices connected to the same router, turn some of them off and see how the Smart Plug responds.
Solution #2: Assess The Wi-Fi Bandwidth
Mismatched Wi-Fi bandwidths can result in connectivity issues, including the Gosund smart plug solid red light.
It’s essential to ensure that your Smart Plug is connected to the correct frequency.
Some phones automatically connect to 5GHz networks, which can be incompatible with the Gosund Smart Plug, operating on the 2.4GHz frequency.
- Temporarily disconnect your Smart Plug from the Gosund app;
- Access your phone’s Wi-Fi settings;
- Switch from the 5GHz frequency to the compatible 2.4GHz frequency;
- Unplug and then plug in the Smart Plug again;
- Try reconnecting it to the app.
After that, you must check how the Gosund Smart Plug behaves. The red light should be gone!
Solution #3: Locate Channel Interference
Interference from neighboring routers can disrupt your network’s performance, potentially causing the red light issue on your Smart Plug.
Identifying and addressing channel interference is crucial. You can use network analysis tools to scan for active channels in your vicinity and select one with minimal interference.
Here is how:
- Install the NetSpot app on your computer.
- Run the NetSpot software;
- Use it to check for active routers in your area.
- Identify the most used channels in the 2.4GHz frequency.
How To Use A Different Channel
Now, let’s dive into changing your router’s channel to eliminate interference from neighboring networks:
- Locate your router’s IP address (you can usually find it on a label attached to your router);
- Open a web browser and type your router’s IP address to access its settings;
- Navigate to the “Wireless settings” menu;
- Look for the option to adjust the channels;
- Choose a channel that has few or no nearby activity to reduce interference;
- Save these new channel options.
After saving the settings, the router should automatically restart to implement the updated channel configuration.
This adjustment should noticeably enhance the performance of your Gosund Smart Plug and all other connected devices, particularly when multiple devices require simultaneous data access.
Solution #4: Use A Different Socket
If you’re experiencing connectivity issues with your Gosund Smart Plug, don’t overlook the possibility that the socket you’re using might be causing the problem.
Electrical circuits can wear out over time, leading to variations in voltage and overall performance. Below’s what you need to know:
Inspect Socket Voltage
Start by turning off the power at the circuit breaker for safety.
- Grab a multimeter;
- Measure the voltage of the socket you’re currently using;
- Check the results to see if they match the necessary voltage for the smart plug;
- Any significant deviation could indicate an issue.
To be thorough, repeat the voltage measurement process for other sockets in your house.
You may find that some sockets deliver a more consistent and suitable voltage for your smart plug. Simply swap to them and see how the smart plug behaves.
Solution #5: Reinstall In AP Mode
Encountering the red blinking light while connecting your Gosund Smart Plug? No worries; you can try a different approach by reinstalling it in Access Point (AP) Mode.
This can be especially handy if you’ve faced issues with the Easy Mode setup.
Here’s a comprehensive guide to get you back on track:
- Close the Gosund app;
- Physically unplug the Gosund Smart Plug;
- Plug the Smart Plug back into the socket to give it a fresh start;
- Reopen the Gosund app;
- Navigate to the setup page;
- Choose “AP Mode” instead of Easy Mode in the app;
- Do as the on-screen instructions say.
The AP mode should be your standard choice when installing new Smart Plugs in your house.
That should help prevent many issues such as disconnection or the red light.
Solution #6: Change The DNS (On The Router)
Is your Gosund Smart Plug struggling to connect to your Wi-Fi network? You can also resolve the red blinking light by adjusting your DNS settings.
Some devices are particularly sensitive to incorrect DNS configurations, which can include automatic addresses or default settings provided by your ISP.
This is the method:
- Open a web browser and type your router’s IP address;
- Access the DNS settings within your router’s interface;
- Set 22.214.171.124 as the primary DNS and 126.96.36.199 as the secondary DNS;
- Save the changes and exit the DNS settings.
If your router doesn’t restart automatically, perform a manual restart.
After making this adjustment, your Gosund Smart Plug should be able to maintain a stable connection without frequent disconnections or going offline.
Solution #7: Look For An Update
Facing repeated blinking red light issues with your Gosund Smart Plug? That problem may stem from outdated firmware.
Such a glitch prevents the device from maintaining a consistent internet connection and responding to app commands.
To tackle this concern follow these steps:
- Restart the device (simply unplug it from the wall outlet and then plug it back in);
- Find the specific device on your app’s home screen;
- Access the device’s settings;
- Search for “Firmware Update“;
- Tap on “Check for updates” if available.
- Choose to install the update if the app finds it.
Make certain that your smartphone is connected to the same Wi-Fi network as the Gosund device throughout the firmware update procedure.
Solution #8: Hard Reset The Plug
When confronted with a malfunctioning smart device, performing a factory reset is often the most effective remedy.
This process entails the complete erasure of all data generated between the plug and phone.
To execute a factory reset for your Gosund Smart Plug, start by erasing it on the phone:
- Open the Gosund app;
- Locate the device displayed main screen;
- Tap the edit icon;
- Locate the device settings;
- Choose to “Remove Device“;
- Confirm your selection.
The device must not show up in the app after that.
Perform A Physical Reset
The physical reset is helpful to ensure that the device is fully reset:
- Plug the Smart Plug into a standard power outlet;
- Hold down the reset button for 5 to 10 seconds;
- Observe the status LED indicator, which should start blinking rapidly (the Smart Plug has entered pairing mode)
- Proceed to reconnect the device using the Gosund app.
Connect The Device Again
Here are the steps to ensure that you connect the device with the best settings and don’t have any problems again:
- Connect the Smart Plug to a power source.
- Activate the pairing mode.
- Launch the app.
- Select the “Add device” icon.
- Choose “Electrical Outlet” or a similar option.
- Input your Wi-Fi network name and password.
- Assign a name or location to the device.
Following these steps, assess the Smart Plug’s remote control functionality via the app.
Note: During the connection process, consider switching to AP Mode if Easy Mode proves ineffective.
Gosund smart plug red light often indicates network-related problems. Whether it’s interference, incorrect DNS settings, or other connectivity issues, there are several effective solutions to address this problem.
By following the provided troubleshooting steps, you can quickly resolve the problem.
Other solutions and tips to the Gosund Smart Plug can be found throughout the blog!
- SimpliSafe Says Entry Sensor Open? (Here’s Your Fix) - February 25, 2024
- SimpliSafe Glass Break Sensor Offline? (Fix It Fast!) - February 25, 2024
- Sensi Thermostat No C Wire? (Fix & Install Now!) - February 25, 2024