Wyze Camera Picking Up Voices? – (7 Proven Solutions!)

Wyze camera picking up voices can be both an annoyance and scary at the same time, as it’s not clear what your camera is recording.

If your Wyze camera is picking up voices, even though there is no apparent source, it’s possibly due to incorrect sensitivity settings or interference.

To fix your Wyze camera picking up voices, first, you have to dial down the voice sensitivity settings. Then, check your camera placement and reset the device.

Now that you know some of the key fixes for your Wyze camera picking up unwanted songs, let’s first try to understand what causes such issues.

Why is My Wyze Camera Picking up Voices?

Wyze cameras come with a highly sensitive microphone that is built in so that you can gain extra clarity on the situation.

Sometimes, these microphones can pick up sounds from far away, causing you alarm as you might suspect they come from your home instead.

Here are the top causes of Wyze cameras picking up voices:

Now you know the general causes of your Wyze camera picking up unwanted sounds.

At this point, we can try performing some troubleshooting solutions to resolve the Wyze issue.

How to Fix Wyze Camera Picking up Voices?

Tip: If you have a remote monitoring plan, contact their representative about this noise issue.

Solution #1: Adjust Your Wyze Camera Sensitivity Settings

Wyze camera hearing voices while disturbing is most likely due to an over-tuned sensitivity threshold causing unwanted microphone activation.

This issue can be resolved with a couple of setting changes and is no cause for worry.

Here is how to lower your Wyze camera microphone sensitivity settings:

1. Open the Wyze app on your smartphone.
2. Keep in mind that depending on your Wyze model and app software, the steps below could be different.
3. Navigate to the “Cameras” tab and select the Wyze camera you want to adjust.
4. Tap on “Settings” (gear icon) for the selected camera.
5. Choose “Detection Settings” from the menu.
6. Adjust the sensitivity slider to a lower setting to reduce voice pickup.
7. Save the changes by tapping on the “Save” or “Apply” button.
8. Test the camera by monitoring for any improvements in voice detection.

Note: Some Wyze cameras have night vision, which can give you more insight into recognizing the voice source.

Solution #2: Check the Wyze Camera Placement

Suppose you have properly configured your voice detection threshold in the step above, yet your Wyze still picks up unwanted sounds.

In this case, you can check the camera’s placement and optimize its position to prevent it from picking up random sound sources.

Here are some general tips to ensure your Wyze camera is properly placed:

• Ensure the Wyze camera is placed at an optimal height and angle.
• Verify that the camera lens and sensors are clean and free from obstructions – you can use a soft cloth to wipe it gently.
• Experiment with different camera placements to find a position that doesn’t pick up as much unwanted ambient noise.
• Consider the distance between the camera and the area where voices are picked up – if your camera is placed next to a sidewalk, it will likely pick up the chatter of passing people.
• Reevaluate the camera’s field of view to minimize unintended sound capture.

Note: Avoid positioning the Wyze camera too close to walls or reflective surfaces.

Solution #3: Reset Wyze Camera Settings

Sometimes, overly sensitive sound detection is due to an internal software issue.

This can also cause you to hear static or sound that sounds like radio communication. To fix this issue, a simple settings reset can help.

Here is how to reset your Wyze camera settings to prevent unwanted voice pick-up:

1. Open the Wyze app and go to the “Cameras” tab.
2. Select the Wyze camera experiencing voice pick-up issues.
3. Tap on “Settings” and choose “Advanced Settings.”
4. Scroll down and select “Factory Reset” to reset all camera settings.
5. Confirm the reset action, and wait for the process to complete.
6. Set up the Wyze camera again as a new device in the app.
7. Test the camera to determine if the voice pickup issue persists after the reset.

Note: A hard reset will delete any stored camera information or settings -  ensure you back up beforehand.

Solution #4: Update the Wyze Camera Firmware

If your Wyze camera picks up strange noises in the background, it could be because its software is outdated.

An outdated firmware version can lead to worse voice and sound recognition, as camera updates sometimes improve performance and consistency.

Here is how to ensure your Wyze camera is up to date with the latest version:

1. Launch the Wyze app and go to the “Account” tab.
2. Select the specific Wyze camera from the device list.
3. Check for available firmware updates in the “Device Info” section.
4. If an update is available, follow the on-screen instructions to download and install it.
5. Wait for the firmware update process to complete.
6. Once updated, restart the Wyze camera.
7. Test the camera’s voice detection performance after the firmware update.

Note: If your camera struggles to connect after a software update, remove and reinsert any SD card.

Solution #5:  Optimize Wi-Fi Signal Strength

Sometimes, WiFi signal strength can play a significant role in the quality of feedback you receive from your camera.

If your camera is too far away from your WiFi router, the input you receive can be distorted or sound like voices.

Here is how to ensure your WiFi signal strength is sufficient for your Wyze camera:

1. Confirm that the Wyze camera is connected to a stable Wi-Fi network – if you spot problems with other devices, contact your internet service provider for help.
2. Check the signal strength in the Wyze app under “Device Info” for the selected camera.
3. If the signal is weak, consider moving the camera closer to the Wi-Fi router or placing your router in a more central location.
4. Ensure there are no interference sources, such as other electronic devices, affecting the Wi-Fi signal.
5. Restart the Wyze camera after optimizing the Wi-Fi connection and monitor the camera feed to check for improvements in voice detection.

You could also consider upgrading your Wi-Fi router to one with greater range or consider adding a Wi-Fi extender to enhance coverage.

Note: Not all Wyze devices support 5GHz networks - switch to 2.4GHz instead or use dual-band mode.

Solution #6: Use External Microphones

A clever workaround for the issue of your Wyze camera being too sensitive to sound is to disable its microphone and instead install a new, separate one.

When using a purpose-built microphone, you have a greater chance of properly filtering out noise and voice detection.

Here is how to use an external microphone in conjunction with your Wyze:

1. Purchase an external microphone compatible with Wyze cameras – you can check the official Wyze page for more insight on compatible devices.
2. Connect the external microphone to the Wyze camera’s audio input port.
3. Open the Wyze app and navigate to the camera’s settings.
4. Choose “Audio Settings” and select the external microphone as the audio source.
5. Adjust the microphone sensitivity settings if available.
6. Save the changes and restart the Wyze camera.
7. Test the camera’s voice detection with the external microphone in place.

Note: Ensure the microphone you purchase is weatherproof and has a dust and splash resistance IP rating.

Solution #7: Create a Soundproofing Barrier

If you still have issues even after trying out an external microphone, then the fault is not within the microphone or camera settings but rather your environment.

In this case, you can try adding some soundproofing panels to dampen the incoming sounds.

Here are some tips on installing soundproofing barriers for your Wyze device:

• Identify areas with excessive background noise picked up by the Wyze camera.
• Install soundproofing materials such as acoustic foam or curtains in those areas.
• Place furniture or other objects strategically to absorb sound waves.
• Consider using rugs or carpets to reduce sound reflections.
• Close windows or doors if external noise is a concern.
• Monitor the Wyze camera feed to check for improvements in voice clarity.
• Adjust the soundproofing elements as needed for optimal results.

Note: For cameras placed outside, the only option is to relocate them to face away from major noise sources.

Quick Recap

To fix the Wyze camera picking up voices, start by checking the camera voice or microphone threshold.

Next, reset your Wyze camera and update its firmware to prevent issues.