Oral-B Toothbrush Timer Not Working? (6 Verified Fixes)

Is your Oral-B toothbrush timer not working? You’re in luck because we have the fix!

The Oral-B toothbrush timer ensures you clean your teeth properly by beeping or vibrating every 30 seconds and signaling the end of the brushing session.

To get your Oral-B toothbrush’s timer to work, switch to a different cleaning or brushing mode to give it a refresh. If this doesn’t resolve the issue, we recommend resetting your toothbrush.

Outstanding, it’s time to go over the details!

Oral-B Toothbrush Timer Not Working – 6 Verified Solutions

There are several reasons why your Oral-B toothbrush timer is not working.

Knowing the culprit will help you maximize the benefits of proper toothbrushing.

Here are some of the most common causes:

• Using too much pressure when brushing
• Having a worn-down brush head
• Having a low battery

In this article, we’ll assist you in recognizing and solving problems with the Oral-B toothbrush’s timer.

We have compiled the most efficient steps to make it easier for you.  

Before You Start

Before you proceed with any of the solutions provided, ensure you perform these four essential troubleshooting steps to address common issues effectively.

You might be facing a straightforward problem that doesn’t require intricate solutions. 

1. Check the battery level of your toothbrush
2. Check your toothbrush’s power connection
3. Check the connection between your toothbrush and the Oral-B app
4. Check the timer settings of your toothbrush and the Oral-B app

If these don’t address the problem, move on to the next solutions. 

1. Use Light or Medium Pressure when Brushing

Using too much pressure when brushing causes the toothbrush to reduce its speed and intensity, which then affects the timer function.

Your toothbrush will flash a red light to warn you that you’re brushing too hard. To fix this, use light or medium pressure when brushing your teeth.

This will allow your toothbrush to work at its optimal level and deliver the best cleaning results.

Your toothbrush will also flash a green light to confirm you’re using the right pressure. 

To use light or medium pressure when brushing, follow these steps:

1. Hold your Oral-B toothbrush gently in your hand. 
2. Place the brush head on your head at a 45-degree angle.
3. Move the brush head slowly and gently across your teeth. 
4. Follow the guidance of the toothbrush and the Oral-B app. 

Here are additional tips you should keep in mind:

• Do not grip the toothbrush too tightly or squeeze it too hard.
• Do not press the toothbrush too hard against your teeth or gums.
• Do not scrub or push it too fast.
• Do not apply any extra force or motion. 

If you still have an Oral B electric toothbrush timer not working, continue to the next solution. 

2. Reset the Timer by Switching Off your Toothbrush for 30 Seconds

A glitch or error in the toothbrush system also affects the timer and causes it to malfunction.

The timer won’t be able to send the data to the app, keeping you from monitoring your brushing habits and improving your oral health. 

To fix this, Oral-B recommends that you reset the timer by switching off your toothbrush for more than 30 seconds and turning it back on.

Here are the steps to do this:

1. Press the power button of your Oral-B toothbrush to turn it off. 
2. You should hear a beep and see the light go off.
3. Wait 30 seconds, not touching or moving your toothbrush during this time.
4. Press the power button again to turn it on. 
5. Test the timer function again. 

Note: You’ll know this worked if you hear a beep or feel a vibration every 30 seconds and a longer beep and quiver at the end of the two-minute session. 

3. Switch to a Different Cleaning or Brushing Mode

Each cleaning mode corresponds with a specific brushing duration and intensity, and using the wrong cleaning or brushing mode affects the accuracy and consistency of the timer function.

To fix this, switch to a different cleaning or brushing mode that suits your needs and preferences. 

Here are the steps to do this:

1. Press the power button of your Oral-B toothbrush to turn it on.
2. Press down the mode button to cycle through the different modes. 
3. You will hear a beep or see the light change color for each mode. 
4. Select the mode you want to use and release the mode button.  
5. You will hear a beep and see the light stay on in the selected mode.
6. Test the timer function again. 

Here’s a table illustrating the different modes on your Oral-B toothbrush:

Mode	Description	Timer Function
Daily Clean	Standard mode for thorough cleaning	Beeps every 30 seconds and stops after 2 minutes
Sensitive	Gentle mode for softer cleaning	Beeps every 30 seconds and stops after 2 minutes
Whitening	Polishing mode for removing stains	Beeps every 30 seconds for 2 minutes, then beeps every 20 seconds for the last 30 seconds
Gum Care	Massage mode for stimulating gums	Beeps every 30 seconds for 2 minutes, then beeps non-stop for 1 minute
Pro-Clean	Faster and more intense mode for cleaning	Beeps every 30 seconds and stops after 2 minutes

If this doesn’t get the job done, proceed to the next suggestion method. 

4. Replace the Brush Head if it’s Worn Down

A worn-down brush head reduces the effectiveness and accuracy of the toothbrush, thereby affecting the timer function.

To avoid this, replace the brush head with a new one. Your Oral-B toothbrush will remind you to do this by flashing a green light every 30 seconds. 

Here are the steps to replace the brush head:

1. Press the power button of your Oral-B toothbrush to turn it off.
2. Slightly twist and pull the old brush head off the toothbrush handle.
3. Twist and push the new brush head onto the handle.
4. Press the power button again to turn your toothbrush on. 
5. Test the timer function again. 

Note: Once you replace the worn-down brush head, your toothbrush will stop flashing the green light and recognize the new brush head. 

5. Update the Toothbrush Firmware

The firmware affects the performance and functionality of your Oral-B electric toothbrush, including the timer function.

If it’s outdated, you will experience issues caused by errors and glitches.

To fix this, update your toothbrush’s firmware to the latest version using the Oral-B app. to ensure it works properly and delivers optimal results. 

Here are the steps to update the toothbrush firmware:

1. Download and install the Oral-B app on your smartphone.
2. Open the Oral-B app and create an account or log in. 
3. Turn on Bluetooth on your smartphone.
4. Pair your toothbrush with the app. 
5. Check for firmware updates on the Oral-B app. 
6. Download and install the firmware update. 
7. Test the timer function again. 

Note: Keep your toothbrush and smartphone close to each other and follow the instructions on the app to complete the update.

6. Reset Your Oral-B Toothbrush

Another possible culprit is a corrupted or damaged toothbrush system, which disrupts the timer function and hinders your toothbrush’s overall performance.

To fix this, you must reset your Oral-B toothbrush to its original settings using the Oral-B app.

Note that doing this will erase all data and settings on your toothbrush. 

Here are the steps to do this: 

1. Turn on Bluetooth on your Oral-B toothbrush and smartphone.
2. Open the Oral-B app on your smartphone. 
3. Go to the Settings menu.
4. Select the Reset option. 
5. You’ll receive a warning message requiring you to re-pair your toothbrush with the app.
6. Confirm you want to reset your toothbrush.
7. You will see a progress bar and hear a beep when the reset is done.  
8. Pair your toothbrush with the Oral-B app again. 
9. Follow the on-screen instructions on the Oral-B app to connect them.
10. Test the timer function again. 

Note: Ensure your toothbrush is fully charged before resetting to prevent interruptions. 

If none of the above solutions works, contact Oral-B customer support for troubleshooting guidance specific to your toothbrush model.

You may be dealing with a more complex issue that requires professional assistance. 

Quick Recap

Your toothbrush is essential for proper teeth cleaning, signaling every 30 seconds and the session’s end.

However, problems such as the Oral-B toothbrush timer not working arise due to errors or glitches. To fix this, reset your toothbrush.

If the issue persists, update the toothbrush’s firmware. To discover more Oral-B toothbrush troubleshooting solutions, peruse our blog!