Whenever your Homedics air purifier won’t turn on, it can be an intimidating issue when it presents itself because you suspect that the device could be permanently damaged.
Don’t worry, as this likely isn’t the case, and the issue could be fixed with a few adjustments.
To fix your Homedics air purifier not turning on, start by checking the filter for issues. Next, ensure the power cable and outlet are operational and check for safety features.
Now that you know the rough fixes for Homedics air purifiers that won’t work or turn on, let’s see what can cause this power-related issue.
Why Won’t My Homedics Air Purifier Turn On?
Whenever your Homedics device is not turning on when you press the power button or no lights glow when you plug it into power, it can be due to two primary issues.
There can be a fault within your power delivery or the air purifier itself, such as a safety feature preventing work.
Here is an overview of the most common causes of Homedics air purifiers not turning on:
Now that you are familiar with the underlying issues for Homedics air purifiers not turning on let’s try some actionable solutions.
How to Fix Homedics Air Purifier Won’t Turn On
Tip: Never cover the air vents or intake ports of your Homedics air purifier with obstacles.
Solution #1: Evaluate the Filter Condition
Suppose your Homedics TotalClean air purifier won’t turn on; this could be due to a built-in safety feature that prevents device operation if the filter is incorrectly installed or congested.
To ensure this isn’t interfering with your device’s working, you have to examine the filter condition.
Here is how to ensure your filter is in optimal condition for your Homedics air purifier:
- Turn off and unplug the Homedics air purifier.
- Open or remove the filter compartment according to your exact model instructions.
- Check if the filters are correctly installed and seated in place
- Check if the pre-filter and main HEPA are facing the proper way.
- If the filters are dirty or clogged, replace them with new Homedics filters.
- Ensure no packaging material is left on new filters if they’ve been recently replaced.
- Reassemble the filter compartment correctly, plug it in, and attempt to turn on the Homedics air purifier.
Note: Never attempt to clean or wash a HEPA filter, as it won't improve its filter capacity - replace if needed.
Solution #2: Check the Power Source
If there is an issue with your power source where you plug in the Homedics air purifier, it won’t start or work correctly until you resolve the issue.
Note that Homedics devices are rated for 120V power outlets in the USA and need a power adapter if used elsewhere.
Here is how to ensure your Homedics power source is in working order:
- Ensure the Homedics air purifier is plugged into a working electrical outlet.
- Test the outlet with another device to confirm it’s providing power.
- Check for any tripped circuit breakers or blown fuses in your home.
- Verify that the plug is fully inserted into the outlet.
- Plug the Homedics air purifier into a different outlet to rule out an outlet issue.
- Try resetting the unit by unplugging it for a minute and then plugging it back in.
Note: If you see a blinking red or amber light on your Homedics device, it's likely due to a filter-related issue.
Solution #3: Inspect the Power Cord
In case the power cord connected to your Homedics air purifier is faulty, it can become a health hazard and prevent your device from working.
To prevent this, you must examine the cord for issues.
Here are the steps to verify your Homedics air purifier power cord:
- Unplug the Homedics air purifier from the electrical outlet.
- Examine the power cord for any cuts, fraying, or other damage.
- If damage is found, cease using the air purifier and contact Homedics for a replacement.
- Gently straighten out any kinks or twists in the power cord.
- Plug the power cord back into the electrical outlet securely.
After these steps, check the connection at the back of the unit to ensure it’s tight. Try to turn on the Homedics air purifier again.
Note: Ensure your power strip is not overloaded with other running appliances or devices.
Solution #4: Test the Control Panel
An overlooked aspect of troubleshooting a non-working Homedics air purifier is the interface on the top side of the device.
Sometimes, it could be the case that the power button is stuck or not making proper contact.
Here is how to check your Homedics control panel for issues:
- Unplug the Homedics air purifier and wait for a few moments.
- Plug the unit back in and pay attention to any lights or sounds indicating power.
- Touch the power button to see if there’s any response.
- Clean the control panel with a soft, dry cloth to ensure it’s not affected by dust or dirt.
- Check if there’s a child lock feature or timer that might be preventing the unit from turning on.
Note: If you hear a buzzing sound, it's likely your Homedics purifier has a circuit board issue.
Solution #5: Look for Safety Switch Engagement
Many modern smart air purifiers like Homedics have sensors that prevent the device from running if a certain condition is not met.
This could be things such as a non-closed panel or an incorrectly placed filter.
Here is how to ensure your Homedics doesn’t have any triggered safety switches:
- Turn off and unplug the Homedics air purifier.
- Check for any safety switch that may prevent the unit from turning on if the filter door is open.
- Clean around any sensors or latches, as obstructions can cause them not to fully close.
- Inspect the safety switch for any signs of damage, bents, or wrapping.
- Reassemble any parts you’ve taken apart and make sure everything fits snugly, then plug in the unit to see if it works.
Note: Always have your Homedics air purifier placed on an even and level terrain.
Solution #6: Reset the Homedics Air Purifier
Sometimes, the simplest of solutions work the best – in this case, power cycling your Homedics could clear out static electricity that prevents it from working properly.
Here are the proper steps to power cycle your Homedics air purifier:
- Disconnect the Homedics air purifier from the power source.
- Wait for at least 1 minute to allow the unit to reset.
- While waiting, press then hold the Homedics power button for 60 seconds to discharge any residual power.
- Reconnect the power cord to the outlet.
- Check if the Homedics air purifier turns on immediately upon being plugged in or pressing the power button.
Based on your exact Homedics air purifier model, the steps to reset it might differ.
In this case, it’s best to check the owner’s manual for the specific steps for doing so.
Note: You can also attempt a factory reset if your device has that reset key option available.
Solution #7: Replace or Reset the Fuse (if applicable)
Some air purifiers, including the Homedics lineup, come with a safety feature that prevents a surge from damaging your sensitive device electronics.
If the fuse has been blown out, your device won’t power on. If your device does not come with a fuse, disregard this step.
Only attempt these steps if you have proper safety gear, and checking this won’t void your warranty:
- Unplug the Homedics air purifier and locate the fuse on the plug.
- Carefully remove the fuse cover and the fuse.
- Test the fuse with a multimeter to check for continuity.
- If the fuse is blown, replace it with one of the same size and rating.
- Reinsert the new fuse and secure the fuse cover back in place.
- Plug the Homedics air purifier back in.
- Try turning on the unit to see if this has resolved the issue.
If the issue with powering on your Homedics still persists, your unit might be defective or have complicated electrical problems.
In this case, it’s best to contact Homedics support for further help.
Note: Ensure no obstacles are placed within 3-4 feet of your Homedics device for optimal use.
To resolve Homedic’s air purifier won’t turn on, start by testing if the power outlet or power strip is faulty, then examine the power cord.
Next, power cycle your device and check the fuse.
- SimpliSafe Says Entry Sensor Open? (Here’s Your Fix) - February 25, 2024
- SimpliSafe Glass Break Sensor Offline? (Fix It Fast!) - February 25, 2024
- Sensi Thermostat No C Wire? (Fix & Install Now!) - February 25, 2024