Blue Air purifier orange light can be a daunting issue, as it is not immediately apparent what causes it.
If you experience a red or orange glowing or blinking light, don’t worry; we’ve got you covered with fixes.
To fix the Blueair purifier orange light, check if the pre-filter needs cleaning, then check the app for issues. Next, check the air quality and replace the HEPA filter if needed.
Now that you have a quick preview of the fixes, we will attempt let’s first try to understand what causes the orange light issue.
Why Does My Blueair Purifier Have an Orange Light?
Blueair purifiers typically have a top-panel user interface that shows various notifications, such as air quality or device issues.
An amber or orange warning light is set to periodically remind you to replace the primary Blueair filter. However, it can be caused by other problems as well.
Here is a detailed list of the top causes for Blueair Purifier orange light glowing:
By now, you should have a better grasp on why this orange or amber light appears on your Blueair device, and it’s time to try out some fixes.
How to Fix Blue Air Purifier Orange Light?
Tip: Don't place any objects or obstruct the air vents on top of your Blueair purifier during regular use.
Step #1: Wash the Blueair Pre-Filter
Blueair purifiers are equipped with a pre-filter that serves the purpose of absorbing the bigger dust particles so they don’t enter the primary filter.
Your Blueair might raise an orange air quality alert if it’s not getting sufficient airflow due to a dirty pre-filter.
Here is how to ensure your Blueair pre-filter is in optimal working condition:
- Power down your Blueair and disconnect its power cable.
- Blue air purifiers usually come with a pre-filter and a special fabric noise silencer.
- Slide off the pre-filter wrapped around the base by pulling it either up or down (based on the model).
- Wash the fabric pre-filter thoroughly under warm, soapy water and hang it to dry overnight.
- After the pre-filter is clean, reattach it to the Blueair and restart your device.
- See if the orange light issue is now gone; if not, proceed with further steps below.
Note: Ensure the child lock is disabled when attempting to change the Blueair settings.
Step #2: Troubleshoot the Blueair App
Whenever the Blue Air purifier light is orange, it can sometimes be caused by a malfunction with the app, as the Blue Air device can be controlled through it.
To ensure you are not getting a false amber light, you must verify that your Blueair app is up-to-date.
Here is how to ensure your Blueair App is updated for Android devices:
- Tap on the Google Play Store on your device, and ensure it is connected to a steady WiFi network to facilitate any downloads.
- Find and open the three-line menu icon, usually in the top left corner.
- Select “My apps and games” from the interface.
- If you see the Blueair app listed, ensure to tap the “Update” button to get the latest software.
- You can also manually search in the Play Store search bar for the Blueair app.
- Wait until any pending updates for your Blueair get installed.
Here is how to update the Blueair app for iOS (iPhones and iPads):
- Open the App Store and tap the profile icon on your screen.
- Scroll all the way down to see if there are any updates available.
- If you see updates for the Blueair app, tap “Update” or Update All.
- Let the updates install and re-open the Blueair app.
- After these steps, check if the orange light is gone now.
For the future, ensure you configure your device to automatically download and install updates for your Blueair app.
After installing a brand new update on the Blueair app, you might be prompted to log in again and manually add your Blueair device.
Note: When cleaning the Blueair device, never use harsh detergents or chemical compounds.
Step #3: Manually Reset the Red Circle from the Panel
If you just recently received your Blueair device or have replaced and cleaned the filters, it’s possible that the red light didn’t reset itself.
Usually, the filter replacement light can be cleared by resetting the internal filter timer.
Here is the typical way to reset your Blueair red or orange circle warning light:
- After servicing your filters, ensure your Blueair is powered on.
- Look for the red circle indicator, usually on the top user interface panel.
- Based on your model, you can typically turn off the red light by pressing and holding the button for fan speed for at least 20 seconds or until the red light clears.
- After resetting the red or amber glowing light, restart your Blueair purifier and see if it comes back up again.
Note: If the Blueair purifier gets interference from other WiFi or radio appliances, such as TVs or smart gadgets, move it further away.
Step #4: Add then Remove the Blueair Purifier From the App
The orange light on the Blue Air purifier can sometimes be caused by an internal software glitch related to the air quality notification.
This can usually be resolved when you manually remove the Blueair device from the paired devices tab on your app and add it manually again.
Here is how to remove and then add the Blueair device to your app:
- Ensure your device where the Blueair app is installed has ample WiFi access.
- Check if the Bluetooth is enabled and your Blueair device is ready to pair.
- Deactivate any VPN for the WiFi network, as it can interfere with the air purifier.
- Ensure your router is set to 2.4GHz or dual-band mode; the Blueair purifier can’t connect otherwise.
- Open the Blueair App and tap on the Blueair device you are trying to fix.
- Go to “Product Settings,” then tap delete or remove.
- Return to the home screen of the app and choose “Connect Product,” then follow the onscreen instructions.
Manually removing and adding the device should reset the air quality indicator, which can cause an orange light.
Let your device run for 5-10 minutes to get a fresh reading and see if the orange light is gone.
Note: Don't use your Blueair purifier in damp or highly humid places such as laundry rooms.
Step #5: Reset the Purifier and Check Air Quality
An orange or amber-colored light on your Blueair purifier can indicate that the air quality has dropped.
This issue could be resolved by ensuring that the air quality sensor is clear and that your environment has optimal working conditions for your Blueair air purifier.
Here is how to reset your Blueair device to get a new air quality reading:
- Ensure your Blueair purifier is connected and turned on.
- Locate the main power or standby button, then press and hold it for at least 30 seconds.
- When your LEDs light up simultaneously, release the power button.
- After this, your device should be reset to the factory settings.
- Restart your Blueair device and let it operate for a few minutes.
- You should see the air quality indicator change from orange to green or yellow.
After resetting the device, clean the air quality sensor located on the back side of the Blueair purifier with a soft cloth.
This will ensure your device can correctly gauge the room air quality levels.
Note: When using your Blueair app, make sure that your phone is in close proximity to the device.
Step #6: Replace the Blueair HEPA or Carbon Filter
If you have performed all of the above steps, yet your Blueair is still glowing or blinking in orange, it’s time to replace the old filter.
The steps for this can vary across air purifier models, so check the instruction guide for more precise steps on your device.
Here is the general way to change the Blueair HEPA filter:
- Power down the Blueair device and disconnect it from running power.
- Open the top panel, remove the pre-filter, and detach the HEPA or carbon filter from its base carefully.
- Remove any plastic cover of the new filter and install it facing the right way.
- After ensuring the new filter is securely fastened, power on your Blueair device after reassembling it and see if the issue is gone.
- Reset the fan speed button again to clear the periodic filter replacement alert.
Note: True HEPA or carbon-based filter functionality and filter capacity can't be restored by cleaning.
Blue Air purifier orange light can typically be cleared by ensuring your device runs the app’s latest firmware and cleaning the pre-filter.
If the issue persists, you need to install a brand-new filter.
- SimpliSafe Says Entry Sensor Open? (Here’s Your Fix) - February 25, 2024
- SimpliSafe Glass Break Sensor Offline? (Fix It Fast!) - February 25, 2024
- Sensi Thermostat No C Wire? (Fix & Install Now!) - February 25, 2024